Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Heat Exchangers Solutions for Evaporation & Concentration of Environmental Waste Streams Sector
- Heat Exchangers Solutions for Pasteurisation of Sludge Sector
- Heat Exchangers Solutions for Sewage Treatment Industry
- Heat Exchangers Solutions for for Waste Water Industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Solutions for Industry
- Metal Recycling and Separation in the Mining Industry
- Recycling and separation of metals in the food industry
- Recycling and Separation of Metals in the Recycling Plant Industry
- Recycling and separation of metals in the glass industry
- Recycling and separation of metals in the pharmaceutical industry
- Recycling and Separation of Metals in Food and Beverage Production
- Recycling and Separation of Metals in Plastics and Tire Recycling
- Recycling and Separation of Metals in End-of-Life Vehicle (ELV) Recycling
- Recycling and Metal Separation in Electronics Recycling
- Recycling and separation of metals in the chemical industry
- Recycling and separation of metals from sheared scrap
- Recycling and Separation in Fragmented Scrap: Magnetic Technologies
- Recycling and Separation of Metals in Incinerator Ash: Magnetic Technologies in Action
- Recycling and Repair of Materials in the Financing Industry: Magnetic Technologies in Action
- Recycling and Separation of Ferrous Metals in Mining: Magnetic Technologies
- Separation of recyclable materials from household waste
- Separation of impurities and recyclable materials from commercial waste, industrial waste and bulky waste
- The recovery, separation and recycling of non-ferrous metals with the best magnetic and eddy current separation technology
- Air quality and industrial gas monitoring systems for Ambient air monitoring
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Stack Emission Sampling for Emission Dust Sampling Options
- Stack Emission Sampling for Heavy Metal Sampling System
- Stack Emission Sampling for Mercury Sampling System
- Stack Emission Sampling for Hydrochloride Acid Chimney Sampling
- Stack Emission Sampling for Dioxin Sampling
- Heat Exchangers Solutions for Palm Oil Sector
- Air Pollution Measurements for Education
- Gas Analysers and Sampling System for Combustion Control & Flue Gas
- Gas Analysers and Sampling System for Power Plants
- Heat Exchangers Solutions for Anaerobic Digestion (AD) and Biogas Industry
- Heat Exchangers Solutions for Vegetable Oils Industry
- Soil sampling and drilling solutions for agriculture industry
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Air quality and industrial gas monitoring systems for Road side air monitoring
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Hose and tube pumps for Food and beverage industry
- Air quality and industrial gas monitoring systems for Semiconductor
- Air filtration and gas purification solutions for corrosion detection, prevention and control sector
- Heat Exchangers Solutions for Fine Chemicals Sector
- Heat Exchangers Solutions for Solvent Sector
- Vibratory systems for bulk material handling
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
Xprt Equipment Supplied In Spain
22,981 equipment items found
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuant V is KISTERS’ state-of-the-art non-contact surface velocity 60 GHz V-band Doppler radar sensor. It offers superior resolution and accuracy, with reduced power consumption, all at an appealing price ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Meteorological Station MS-130 is a preconfigured weather monitoring device that requires no programming or specialized setup. This station is shipped with control module (data logger) with a cell module, solar panel, and the following sensors: wind and wind direction (with wind gust and direction averaging), barometric pressure, relative humidity, and ambient temperature. Other ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The TB3 tipping bucket rain gauge features an integrated siphon mechanism designed to provide precise measurements across a wide range of rainfall intensities. Each unit comprises a collector funnel equipped with a stainless-steel leaf filter, an integrated siphon control system, an outer enclosure secured with quick-release fasteners, and a base housing the tipping bucket mechanism. The device ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)
This portable water analysis instrument is designed to be extremely accurate, fast and simple to use in diverse water quality applications. Advanced features include the ability to select from 3 different solution types that model the characteristics of the most commonly encountered types of water; proprietary temperature compensation and TDS conversion algorithms; highly stable ...
Showcase
Manufactured by:C&G Evaporator based inRignano S.Arno (Firenze), ITALY
High quality condensate. Energy consumption is reduced to a minimum by using a heat pump in a vacuum. With an absolute pressure of ≈ 33 mbar in the boiling chamber, evaporations occurs at very low temperatures (≈ 35 ºC). Volumes treated 150 – 30,000 litres/day. Volumes processed 150 – 30,000 ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The HydraGO and HydraGO FLEX represent the most advanced portable soil sensor system. Simply insert the probe into the soil, and tap on the “Sample” button in the HydraGO app. The HydraGO and HydraGO FLEX communicate wirelessly with your smartphone or tablet using Bluetooth. Both systems features a rugged, Delran housing that contains a rechargeable battery. The internal battery will ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
For innovative microbeads and microcapsules. The Encapsulator B-390 / B-395 is a versatile system for encapsulation of active ingredients and materials for R&D purposes. From pharma to food samples, the adaptability of the device lets you obtain innovative microbeads and ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
FlashPure cartridges are offered in a wide range of sizes, covering different stationary phases, particle sizes and geometries. This enables the user to choose the flash cartridge which best suits his purification ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Quick and compliant. The FatExtractor E-500 is designed for quick and compliant fat extraction. Readily adapt your FatExtractor E-500 to changing needs with the interchangeable glass assembly and execute extractions according to Soxhlet, Randall or ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Efficient and watersaving vacuum generation for hydrolysis. This set includes a Vacuum pump V-100, collection bottles and tubing for water saving vacuum generation for Hydrolysis units as HydrolEx ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The SFC-50 from Sepiatec is a compact and easy-to-use chromatography system for preparative separations on small columns by means of supercritical fluid chromatography (SFC). The system offers the comprehensive benefits of SFC technology, such as faster separations, lower costs due to reduced consumption of organic solvents, as well as being more environmentally friendly at increased ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Capacity range of single-head pump: 3 – 7400 l/h, 400 – 10 bar. The ORLITA Evolution meets the most exacting safety requirements as an extremely robust hydraulic diaphragm metering pump. It is characterised by its PTFE multi-layer diaphragm with integral diaphragm rupture warning/signalling and unique diaphragm position control. ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 930 Compact IC Flex ChS/PP/Deg is the intelligent Compact IC instrument with chemical suppression and a peristaltic pump for regeneration and a built-in degasser. The instrument can be used with any separation and detection ...