Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Heat Exchangers Solutions for Evaporation & Concentration of Environmental Waste Streams Sector
- Heat Exchangers Solutions for Pasteurisation of Sludge Sector
- Heat Exchangers Solutions for Sewage Treatment Industry
- Heat Exchangers Solutions for for Waste Water Industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Solutions for Industry
- Metal Recycling and Separation in the Mining Industry
- Recycling and separation of metals in the food industry
- Recycling and Separation of Metals in the Recycling Plant Industry
- Recycling and separation of metals in the glass industry
- Recycling and separation of metals in the pharmaceutical industry
- Recycling and Separation of Metals in Food and Beverage Production
- Recycling and Separation of Metals in Plastics and Tire Recycling
- Recycling and Separation of Metals in End-of-Life Vehicle (ELV) Recycling
- Recycling and Metal Separation in Electronics Recycling
- Recycling and separation of metals in the chemical industry
- Recycling and separation of metals from sheared scrap
- Recycling and Separation in Fragmented Scrap: Magnetic Technologies
- Recycling and Separation of Metals in Incinerator Ash: Magnetic Technologies in Action
- Recycling and Repair of Materials in the Financing Industry: Magnetic Technologies in Action
- Recycling and Separation of Ferrous Metals in Mining: Magnetic Technologies
- Separation of recyclable materials from household waste
- Separation of impurities and recyclable materials from commercial waste, industrial waste and bulky waste
- The recovery, separation and recycling of non-ferrous metals with the best magnetic and eddy current separation technology
- Air quality and industrial gas monitoring systems for Ambient air monitoring
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Stack Emission Sampling for Emission Dust Sampling Options
- Stack Emission Sampling for Heavy Metal Sampling System
- Stack Emission Sampling for Mercury Sampling System
- Stack Emission Sampling for Hydrochloride Acid Chimney Sampling
- Stack Emission Sampling for Dioxin Sampling
- Heat Exchangers Solutions for Palm Oil Sector
- Air Pollution Measurements for Education
- Gas Analysers and Sampling System for Combustion Control & Flue Gas
- Gas Analysers and Sampling System for Power Plants
- Heat Exchangers Solutions for Anaerobic Digestion (AD) and Biogas Industry
- Heat Exchangers Solutions for Vegetable Oils Industry
- Soil sampling and drilling solutions for agriculture industry
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Air quality and industrial gas monitoring systems for Road side air monitoring
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Hose and tube pumps for Food and beverage industry
- Air quality and industrial gas monitoring systems for Semiconductor
- Air filtration and gas purification solutions for corrosion detection, prevention and control sector
- Heat Exchangers Solutions for Fine Chemicals Sector
- Heat Exchangers Solutions for Solvent Sector
- Vibratory systems for bulk material handling
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
Xprt Equipment Supplied In Spain
22,987 equipment items found
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuant V is KISTERS’ state-of-the-art non-contact surface velocity 60 GHz V-band Doppler radar sensor. It offers superior resolution and accuracy, with reduced power consumption, all at an appealing price ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Meteorological Station MS-130 is a preconfigured weather monitoring device that requires no programming or specialized setup. This station is shipped with control module (data logger) with a cell module, solar panel, and the following sensors: wind and wind direction (with wind gust and direction averaging), barometric pressure, relative humidity, and ambient temperature. Other ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
FlashPure cartridges are offered in a wide range of sizes, covering different stationary phases, particle sizes and geometries. This enables the user to choose the flash cartridge which best suits his purification ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Beaker flask 100 ml with rubber cap for direct connection to manifold valves including filter paper (75 μm, 100 pcs.) and O-ring (2 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s unique Sepbox systems allow samples to be processed automatically, and significantly accelerat the purification process. The Sepbox 2D product line includes the two models 2D-250 and 2D-2000. The Sepbox concept is based on a patented combination of High Performance Liquid Chromatography (HPLC) and Solid Phase Extraction (SPE) reliable and proven techniques that provide a ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The Sepmatix SFC 8x parallel system combines Sepiatec’s proven parallel HPLC technology with the advantages of supercritical fluid chromatography. The result is the first SFC system with eight separating columns working in parallel, high operating speed and as yet unmatched performance. In a space of only a few minutes for example enantiomers can be separated on eight different chiral ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Small particles, small samples, high yields. With the Nano Spray Dryer B-90 HP, gently process the smallest sample amounts into submicron particles with minimal product loss. The user-friendly system improves productivity in areas where small particles make a big ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Made for everyday evaporation: Experience reliability and simplicity throughout your daily workflow. The Rotavapor® R-180 offers robust performance, intuitive design, and essential safety features, making it a smart addition to any laboratory. Evaporating flask size: up to 3 L. Lift mechanism: electric. Temperature range: up to 95 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
EX-protection fulfilling highest safety levels. The intuitive operation, handling, and protection of the Rotavapor® R-220 EX guarantee safe and efficient industrial distillation with a flask of up to 20L. Meet the newest EX regulations by customizing your industrial Rotavapor® to your ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
More samples per day. The KjelDigester K-446 / K-449 reduces the block digestion process by up to 2 hours and meets the highest safety requirements. The high degree of automation is the perfect match to the KjelMaster System allowing more samples per day to be ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Robust measurement system for the monitoring of reactions in technical centers and in pilot plants. The NIRS XDS Interactance OptiProbe Analyzer enables the simple and reliable monitoring of chemical reactions in technical centers and pilot plants. The method development and the scale-up of production processes are areas of application in which the NIRS XDS Interactance OptiProbe Analyzer ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Liquid Autosampler CIC (TEI) is used for automated analysis of liquid samples using Combustion IC. It can be used in combination with the Boat Introduction Modules (6.07311.010 or 6.07311.020) and the Liquid Introduction Module ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The i-Raman® Plus 785H is part of our award-winning series of i-Raman portable Raman spectrometers powered by our innovative intelligent spectrometer technology. Using a high-quantum-efficiency CCD array detector with TE cooling and high dynamic range, this portable Raman spectrometer delivers excellent performance with low noise, even at integration times of up to 30 minutes, making it ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
μStat 200 is a portable BiPotentiostat that can be applied for Voltammetric or Amperometric measurements and can be used with one- or two-working electrodes configuration. USB ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The ProcessLab ADI 2045PL is a robust routine system for at-line ion analysis on the production floor and in control labs. It is typically used for multiple sampling points and parameters that do not require fast analysis and response times. Samples are taken manually at each sampling point, fed into the ProcessLab (manually or by means of an autosampler), and automatically ...