Refine by
Applications
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Incinerator solutions for the abattoir / slaughterhouse waste sector
- Incinerator solutions for the farm sector
- Solutions for Mining
- qCell T Series for Coagulation - Human Blood Research
- qCell T Series for Water Quality Analysis
- qCell T Series for Biofilm Analysis
- Solution for Water, Weather and Environment Monitoring
- qCell T Series for Cell Analysis
- qCell T Series for Polyelectrolyte Adsorption Studied
- Gas analysis for the environmental monitoring industry
- Industrial gas monitoring
- Stack gas emission monitoring for the energy industry
Xprt Equipment Supplied In Swaziland
619 equipment items found
Showcase
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS TB3 is a high-quality tipping bucket rain gauge for measuring rainfall and precipitation in urban and rural locations. Due to the integrated syphon, the gauge delivers high levels of accuracy across a broad range of rainfall intensities. With the optional heater the TB3 is the ideal device for cold ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ Water Quality iBox is a robust fully configured all-in-one turnkey solution for ?eld deployment of water quality sensors. It combines several water quality sensors for measuring nitrate, BOD, DOC, algae (Chl-a), cyanobacteria (Phycocyanin), turbidity, pH, etc. and an iRIS 270 datalogger for data communications. The iBox solution is fully customizable and can be equipped with ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ tipping bucket heater TB3H-LP is a low-power heating element, that raises the temperature of the interior of the rain gauge, funnel and catch to avoid the freezing of the gauge in cold climates with subsequent loss of precipitation records. The TB3H-LP saves energy by means of switching on power for a limited time only when snow is detected in the ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The Flying Fox is a portable towing and positioning system with built-in electric motor and remote control. It moves remote-controlled over a span of rope transversely to the flow axis and pulls a measuring device – e.g. an ADCP boat – for cross-section measurement through the river, and positions the device exactly at the measuring ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS multi-parameter water quality probes HyQual 200, HyQual 300 and HyQual 300T are your individual complete solutions in water quality analysis. Depending on the chosen model and optional extensions, the sensors can determine a subset or all of the following ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
Our high-end matrixFlu VIS fluorometer combines multiple excitation and detection wavelengths for fluorescence meas urements in a single device with a highly compact design. The special optical arrangement of excitation and detection channels enables not only single values to be determined, but also a 4x4 matrix of wavelength combinations. This allows quasi synchronous in-situ detection of EEMs ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ TB340A is a fully automated laboratory calibration and test bench for a wide selection of tipping bucket rain gauges differing in type, make, shape and size. Thoughtful system design, quality hardware components and professional software development provide the reliability and overall quality of the TB340A. The autonomous calibration bench is software controlled and thereby allows ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
enviroFlu-HC is the new generation of immersion sensors for measurement of oil-in-water. The used measuring principle of UV fluorescence is much more sensitive than the conventionally used infrared scattering or absorption method. This allows to determine even the slightest traces of PAH's, for example in drinking water and cooling water condensates. Application areas include the petrochemical ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
For short to medium term gauging studies, the Riverina and Barossa Winches can be quickly mounted on the operating side support post, the discharge measurements taken and the winch packed up and moved to the next site. For permanent or long-term installations, the winch is generally located in a ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS have adopted the U.S.G.S. Columbus Pattern gauging weight which range from 7kg to 90 kg. These streamlined weights maintain a steadier position in water flowing at high velocities and align the current meter into the ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ bed load sampler BLSH is an easy-to-use hand-held sampler for measuring and analysing coarse sand, silt, gravel, rock or other insoluble materials carried by a stream on or immediately above its bed. The bed load samplers are designed for use in natural streams to determine rate of sediment concentration relative to ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The type A four wheel bridge crane 4WBC is a collapsible unit intended for stream discharge measurement or for stream sediment sampling from a bridge. The 4WBC can deploy Columbus weights and sediment samplers up to 70 ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
Conductivity sensors are measuring devices that measure the ability of a measuring medium to conduct electric current between two electrodes. The current flows by ion transport. This means that measuring media with a higher number of ions conduct the current better. A conductivity detector is used for digital measurements of conductivity in pure or process ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuant Edge L is KISTERS’ advanced single-device radar water level monitoring station powered by KIPTEC (KISTERS Intelligent Platform for Embedded Connectivity). Minimal infrastructure and fast installation make the autonomous sensor ideal for both permanent deployments and time-limited monitoring campaigns – without compromising ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ Magna Rod takes all the headaches out of current meter gauging: It is the all-in-one solution for measurement of stream velocity and discharge by wading. It bundles a robust, lightweight and convenient rod with a counter device and additionally offers the possibility to attach various current ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The MP Series compact weather sensors are designed for robust and maintenance-free measurements in hydrology, meteorology and weather-critical applications where durability, precision and operations in different climatic conditions are ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS RainTrak is a proven product line offering a fully autonomous and integrated All-In-One Rain Gauging and Reporting Station. The complete package is delivered with all elements needed for easy and fast installation and ready to operate within minutes from deployment on any given site. Simply add a valid SIM card to enable network connection and off you ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ Under Ice Rod is the ideal device for measuring discharge of streams under ice. It is a universal tool that has been designed specifically for deployment of various brands of ADCPs and mechanical meters. It provides the client with a unique set of adaptors to suit all make and models of ADCP and current meters used for this application. Simply put your ADCP or meter on the ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The lightweight hand sampler DH48 is used for the collection of suspended sediment samples by wading rod suspension. The easy-to-use sampler consists of an epoxy coated, streamlined aluminium casting (weighing approx. 2 kg), which partially encloses the sample container. An intake nozzle extends horizontally from the nose of the sampler body. The axis of the sample container is inclined at an ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
Long-lasting and energy-efficient UV-LED technology and a robust design are the core features of LISA UV. Like all TriOS sensors LISA uses the unique nanocoated windows combined with compressed air flushing to achieve long operating times without ...