Refine by
Applications
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Incinerator solutions for the abattoir / slaughterhouse waste sector
- Incinerator solutions for the farm sector
- Solutions for Mining
- qCell T Series for Coagulation - Human Blood Research
- qCell T Series for Water Quality Analysis
- qCell T Series for Biofilm Analysis
- Solution for Water, Weather and Environment Monitoring
- qCell T Series for Cell Analysis
- qCell T Series for Polyelectrolyte Adsorption Studied
- Gas analysis for the environmental monitoring industry
- Industrial gas monitoring
- Stack gas emission monitoring for the energy industry
Xprt Equipment Supplied In Swaziland
619 equipment items found
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
In an Internet of Things (IoT) network, a sensor node collects data from one or several sensors. KISTERS IoTa sensor nodes interconnects sensors with data management software by means of adding modern wireless connectivity to digital sensors. IoTa low power sensor nodes are available in two variants, one for LTE-M and LoRaWAN ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The MP Series compact weather sensors are designed for robust and maintenance-free measurements in hydrology, meteorology and weather-critical applications where durability, precision and operations in different climatic conditions are ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuant Edge L is KISTERS’ advanced single-device radar water level monitoring station powered by KIPTEC (KISTERS Intelligent Platform for Embedded Connectivity). Minimal infrastructure and fast installation make the autonomous sensor ideal for both permanent deployments and time-limited monitoring campaigns – without compromising ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ bed load sampler BLSH is an easy-to-use hand-held sampler for measuring and analysing coarse sand, silt, gravel, rock or other insoluble materials carried by a stream on or immediately above its bed. The bed load samplers are designed for use in natural streams to determine rate of sediment concentration relative to ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
nanoFlu fluorometers are low-priced, submersible miniaturized fluorometers for highly precise and selective measurement of CDOM (colored dissolved organic matter, yellow substances), chlorophyll a or phycocyanin in cyanobacteria. Long-term stability of measurements is achieved by the combination of low power consumption and innovative coating of the optical window, as an energy efficient and ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The WS Series compact weather sensors are designed for reliable and maintenance-free measurements in hydrology, meteorology and weather-dependent applications where durability, precision and operations in different moderate climatic conditions and wind speed up to 45 m/s are ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ dry bubble unit HS23 is a standard component of a ‘constant bubble’ type gas purge system. The HS23 provides a constant flow of gas (e.g. dry nitrogen or dried air) through a small diameter conduit (river line) to an opening submerged in the water body ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
TriOS's new low-cost nitrate meter Based on the device platform concept of TriOS sensors like OPUS, LISA and VIPER, TriOS introduces NICO: a low-cost UV photometer for the determination of nitrate. The four detection channels enable a precise optical determination of nitrate by absorption, taking into account turbidity and organic substances that pose a problem for many products currently on the ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ single tipping bucket flow gauges TB0.5L and TB1L are used for measuring water seepage coming out of a pipe or a drain. In both models the bucket is connected to its own dual reed switch effectively enabling redundant data acquisition in two distinct data loggers, or providing data to two devices (e.g. a data logger and a counting display), etc. TB0.5L and TB1L are perfectly ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The Class A Evaporation Pan is a standard device for manual measurement of evaporation (Australian Bureau of Meteorology Class A type). The pan represents an open body of water: It is ?lled with water and exposed on a ?at plateau. The evaporation rate is calculated by the change in level of the free water surface (daily manual readings) and the recorded rainfall (in millimetres). Data can be ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ easy-to-use rising stage sampler RSS is the ideal device for the automatic collection of samples from flashy, intermittent streams at remote or not easily accessible sites, which are visited by personnel at infrequent ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ Water Quality iBox is a robust fully configured all-in-one turnkey solution for ?eld deployment of water quality sensors. It combines several water quality sensors for measuring nitrate, BOD, DOC, algae (Chl-a), cyanobacteria (Phycocyanin), turbidity, pH, etc. and an iRIS 270 datalogger for data communications. The iBox solution is fully customizable and can be equipped with ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ Under Ice Rod is the ideal device for measuring discharge of streams under ice. It is a universal tool that has been designed specifically for deployment of various brands of ADCPs and mechanical meters. It provides the client with a unique set of adaptors to suit all make and models of ADCP and current meters used for this application. Simply put your ADCP or meter on the ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
DH59 is an easy-to-use medium-weight suspended sediment sampler. The sampler consists of an epoxy coated, streamlined bronze casting weighing approx. 10 kg, which partially encloses the sample container. It is equipped with a tail vane assembly to orient the intake nozzle into the approaching flow as the sampler enters the water. ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ Field Calibration Device FCD checks rain gauges in the ?eld for accuracy. The portable lightweight device effectively enables ?eld technicians to run functional tests and veri?cations of any rain gauge in the ?eld. The use of FCD saves time and money, because the tipping bucket rain gauges can remain ?xed in their location without the need for dismantling and transport and with ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The iRIS 150FX is a small, compact datalogger featuring an LCD display and keypad. It can be connected to a wide variety of sensors, and features two analogue (0-5 V, 0-20 mA) inputs, two digital inputs, SDI-12 serial instrument support and a single digital output for alarm or control ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The KISTERS Tipping Bucket Rain gauge Model TB305 is recognised as the world standard for measuring rainfall and precipitation in remote and unattended ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
Reliable water level monitoring – anywhere it matters. HyPremo is a rugged, compact, and programmable hydrostatic pressure sensor that delivers combined water level and temperature measurements in a single device. Output is available either as pressure (bar) or directly as water level (mH2O), along with precise water temperature, making it an ideal, cost-effective solution for long-term ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ dual tipping bucket ?ow gauge TBL-70 is used for measuring water seepage coming out of a pipe or a drain. The unit is equipped with two distinct buckets to provide best accuracy over a large range of ?ows: a smaller bucket at the top of the gauge to measure at low ?ows and a larger one at the bottom to measure at high ?ows. Each bucket is connected to its own dual reed switch ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ tipping bucket heater TB3H is a thermostatically controlled heating element, that raises the temperature of the interior of the rain gauge, funnel and catch to avoid the freezing of the gauge in cold climates with subsequent loss of precipitation ...