Refine by
Applications
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Incinerator solutions for the abattoir / slaughterhouse waste sector
- Incinerator solutions for the farm sector
- Solutions for Mining
- qCell T Series for Coagulation - Human Blood Research
- qCell T Series for Water Quality Analysis
- qCell T Series for Biofilm Analysis
- Solution for Water, Weather and Environment Monitoring
- qCell T Series for Cell Analysis
- qCell T Series for Polyelectrolyte Adsorption Studied
- Gas analysis for the environmental monitoring industry
- Industrial gas monitoring
- Stack gas emission monitoring for the energy industry
Xprt Equipment Supplied In Swaziland
619 equipment items found
Showcase
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS TB3 is a high-quality tipping bucket rain gauge for measuring rainfall and precipitation in urban and rural locations. Due to the integrated syphon, the gauge delivers high levels of accuracy across a broad range of rainfall intensities. With the optional heater the TB3 is the ideal device for cold ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The Class A Evaporation Pan is a standard device for manual measurement of evaporation (Australian Bureau of Meteorology Class A type). The pan represents an open body of water: It is ?lled with water and exposed on a ?at plateau. The evaporation rate is calculated by the change in level of the free water surface (daily manual readings) and the recorded rainfall (in millimetres). Data can be ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The stream gauging computer HydroTab is an assembly of HydroTab software and an Android tablet suitable for harsh and wet environments. It is used for direct water velocity measurements, or collecting, calculating, recording, displaying and emailing full river gauging ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The oxygen sensor uses luminescence-based optical measurement technology and measures reliably and precisely. The low maintenance and small amount of consumable materials needed by the sensor provide immediate returns on investment. Only the membrane cap must be replaced every two years. The sensor can also be used in applications with a very weak water flow. The oxygen sensor is available with a ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ cableway system Hornet Plus has been developed to perform stream discharge measurements from fixed cableways. The Hornet Plus uses an Acoustic Doppler Current Profiler (ADCP) or mechanical current meter attached to a suitable gauging weight to measure discharge. It features an advanced hoist that measures depth, angle of drift and current meter counts, and sends the information to ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
In an Internet of Things (IoT) network, a sensor node collects data from one or several sensors. KISTERS IoTa sensor nodes interconnects sensors with data management software by means of adding modern wireless connectivity to digital sensors. IoTa low power sensor nodes are available in two variants, one for LTE-M and LoRaWAN ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
An iBOX is the core of an hydrometeorological monitoring station. It combines data acquisition, data transmission and power management in a ready-to-be-deployed cabinet for outdoor installation. The electric cabinet housing (for either wall ort post mounting) of the iBOX includes an iRIS data logger, suitable power supply, surge protection, antenna, screw terminations and cable glands. The whole ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
DH59 is an easy-to-use medium-weight suspended sediment sampler. The sampler consists of an epoxy coated, streamlined bronze casting weighing approx. 10 kg, which partially encloses the sample container. It is equipped with a tail vane assembly to orient the intake nozzle into the approaching flow as the sampler enters the water. ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The Flying Fox is a portable towing and positioning system with built-in electric motor and remote control. It moves remote-controlled over a span of rope transversely to the flow axis and pulls a measuring device – e.g. an ADCP boat – for cross-section measurement through the river, and positions the device exactly at the measuring ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuant Edge L is KISTERS’ advanced single-device radar water level monitoring station powered by KIPTEC (KISTERS Intelligent Platform for Embedded Connectivity). Minimal infrastructure and fast installation make the autonomous sensor ideal for both permanent deployments and time-limited monitoring campaigns – without compromising ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
Robust digital pH sensor for operation on TriBox controllers and HS100 DIN G2 rail module. Digital communication provides safe and trouble-free signal transmission from the sensor to the controller. The high-quality gel pH electrode has a hole diaphragm and is insensitive to dirt, making the sensor ideal for wastewater ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The AD375MA is a rugged, microprocessor-based, power-ef?cient shaft encoder for reliable and accurate water level measurement. The built-in digital technology determines the absolute water level from the reference level and the relative rotational movements at level increase or decrease. This eliminates any further calculation or conversion in downstream data acquisition ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The lightweight hand sampler DH48 is used for the collection of suspended sediment samples by wading rod suspension. The easy-to-use sampler consists of an epoxy coated, streamlined aluminium casting (weighing approx. 2 kg), which partially encloses the sample container. An intake nozzle extends horizontally from the nose of the sampler body. The axis of the sample container is inclined at an ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The model TSR MKII Top Setting Wading Rods were developed to simplify the task of carrying out gauging in small streams. The TSR MKII shall only be used in shallow streams, where it is safe for the hydrographer to carry out gauging while ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ Barossa winch is a hand-operated double drum winch capable of handling gauging weights up to 70 kg (154 lb). The design shows two main advantages: Firstly, it enables the operator to change from sounding mode to traversing mode very quickly by engaging the drive gears on each drum. Secondly, the double drum concept eases traversing, as the forces exerted by the gauging weight are ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ tipping bucket heater TB3H-LP is a low-power heating element, that raises the temperature of the interior of the rain gauge, funnel and catch to avoid the freezing of the gauge in cold climates with subsequent loss of precipitation records. The TB3H-LP saves energy by means of switching on power for a limited time only when snow is detected in the ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS RainTrak is a proven product line offering a fully autonomous and integrated All-In-One Rain Gauging and Reporting Station. The complete package is delivered with all elements needed for easy and fast installation and ready to operate within minutes from deployment on any given site. Simply add a valid SIM card to enable network connection and off you ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
enviroFlu-HC is the new generation of immersion sensors for measurement of oil-in-water. The used measuring principle of UV fluorescence is much more sensitive than the conventionally used infrared scattering or absorption method. This allows to determine even the slightest traces of PAH's, for example in drinking water and cooling water condensates. Application areas include the petrochemical ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
iLevel-GW is an IP data logger designed for very low power data acquisition of level and temperature in groundwater and surface waters. The system can be easily expanded into a multi-channel monitoring device by adding optional sensors for water quality monitoring. By default, an iLevel-GW comes with a coupled water level and water temperature sensor.The vented pressure sensors auto-compensate ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuant L+V is KISTERS’ state-of-the-art 60 GHz V-band FMCW* water level & Doppler water velocity radar, with top-tier radar electronics and radar-on-chip technology, offering advantages such ...