Refine by
Applications
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Incinerator solutions for the abattoir / slaughterhouse waste sector
- Incinerator solutions for the farm sector
- Solutions for Mining
- qCell T Series for Coagulation - Human Blood Research
- qCell T Series for Water Quality Analysis
- qCell T Series for Biofilm Analysis
- Solution for Water, Weather and Environment Monitoring
- qCell T Series for Cell Analysis
- qCell T Series for Polyelectrolyte Adsorption Studied
- Gas analysis for the environmental monitoring industry
- Industrial gas monitoring
- Stack gas emission monitoring for the energy industry
Xprt Equipment Supplied In Swaziland
619 equipment items found
Showcase
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS TB3 is a high-quality tipping bucket rain gauge for measuring rainfall and precipitation in urban and rural locations. Due to the integrated syphon, the gauge delivers high levels of accuracy across a broad range of rainfall intensities. With the optional heater the TB3 is the ideal device for cold ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ bed load sampler BLSH is an easy-to-use hand-held sampler for measuring and analysing coarse sand, silt, gravel, rock or other insoluble materials carried by a stream on or immediately above its bed. The bed load samplers are designed for use in natural streams to determine rate of sediment concentration relative to ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuant Edge L is KISTERS’ advanced single-device radar water level monitoring station powered by KIPTEC (KISTERS Intelligent Platform for Embedded Connectivity). Minimal infrastructure and fast installation make the autonomous sensor ideal for both permanent deployments and time-limited monitoring campaigns – without compromising ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The TTurb is a digital sensor for optical turbidity measurements according to the 90° IR scattered light method. Depending on the sensor it can be used in pure water up to 100 FNU as well as in raw-, waste- and process waters up to 1000 FNU. TTurb is available with a 10 m or a 2 m fixed ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
Our high-end matrixFlu VIS fluorometer combines multiple excitation and detection wavelengths for fluorescence meas urements in a single device with a highly compact design. The special optical arrangement of excitation and detection channels enables not only single values to be determined, but also a 4x4 matrix of wavelength combinations. This allows quasi synchronous in-situ detection of EEMs ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The ML-IoT/W data logger turns a TB7 tipping bucket rain gauge into an IoT precipitation monitor. The low-cost and low-power device including its antenna ?ts easily inside the TB7 enclosure. The ML-IoT/W collects the pulses from the rain gauge, accumulates them over a user-de?ned interval and sends periodic rain reports via WiFi connection. With its temperature sensor the ML-IoT/W provides a fair ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuest Solutions’ IP datalogger iRIS 350FX has been designed and constructed for use in harsh outdoor and industrial environments. It is compact, cost effective and easily con?gured, with support for a wide range of instrumentation. The communication slots support wireless 3G modem, Iridium satellite, ethernet, RS232, SDI-12 and modbus slave protocol for SCADA. An integral wireless modem ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ Redback is a cup-type current meter for the measurement of water ?ow in open and closed waters to a ?ne degree of accuracy and repeatability. This is due to its advanced contact switching system and interchangeable bucket system that provides trouble free ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ Magna Rod takes all the headaches out of current meter gauging: It is the all-in-one solution for measurement of stream velocity and discharge by wading. It bundles a robust, lightweight and convenient rod with a counter device and additionally offers the possibility to attach various current ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
Conductivity sensors are measuring devices that measure the ability of a measuring medium to conduct electric current between two electrodes. The current flows by ion transport. This means that measuring media with a higher number of ions conduct the current better. A conductivity detector is used for digital measurements of conductivity in pure or process ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ bed load samplers are designed to sample sand, silt, gravel or rock debris carried by a stream on or immediately above its bed. The BLS30 and BLS48 cable-suspended bed load samplers are used in natural streams for carrying coarse ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ tipping bucket heater TB3H-LP is a low-power heating element, that raises the temperature of the interior of the rain gauge, funnel and catch to avoid the freezing of the gauge in cold climates with subsequent loss of precipitation records. The TB3H-LP saves energy by means of switching on power for a limited time only when snow is detected in the ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The model TSR MKII Top Setting Wading Rods were developed to simplify the task of carrying out gauging in small streams. The TSR MKII shall only be used in shallow streams, where it is safe for the hydrographer to carry out gauging while ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
EnviroPro are fully encapsulated soil sensors for meaningful crop selection, irrigation and fertilisation decision making. The multi-function and multi-level subsurface instruments offer continuous reliable and repeatable monitoring of soil moisture, temperature and salinity (EC)*. With salinity and temperature compensated moisture readings, EnviroPro soil probes provide accurate data for better ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The Class A Evaporation Pan is a standard device for manual measurement of evaporation (Australian Bureau of Meteorology Class A type). The pan represents an open body of water: It is ?lled with water and exposed on a ?at plateau. The evaporation rate is calculated by the change in level of the free water surface (daily manual readings) and the recorded rainfall (in millimetres). Data can be ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
End-to-end system of sensors & mobile software, delivering soil moisture & weather data to support decisions for optimal crop quality&yield. Easily access data from anywhere 24/7 and customize alerts for dryness, excess moisture, or risk of damaging frost. Achieve irrigation system uniformity as you monitor and visualize water uptake from the soil. ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ dry bubble unit HS23 is a standard component of a ‘constant bubble’ type gas purge system. The HS23 provides a constant flow of gas (e.g. dry nitrogen or dried air) through a small diameter conduit (river line) to an opening submerged in the water body ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The lightweight hand sampler DH48 is used for the collection of suspended sediment samples by wading rod suspension. The easy-to-use sampler consists of an epoxy coated, streamlined aluminium casting (weighing approx. 2 kg), which partially encloses the sample container. An intake nozzle extends horizontally from the nose of the sampler body. The axis of the sample container is inclined at an ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
An iBOX is the core of an hydrometeorological monitoring station. It combines data acquisition, data transmission and power management in a ready-to-be-deployed cabinet for outdoor installation. The electric cabinet housing (for either wall ort post mounting) of the iBOX includes an iRIS data logger, suitable power supply, surge protection, antenna, screw terminations and cable glands. The whole ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ easy-to-use rising stage sampler RSS is the ideal device for the automatic collection of samples from flashy, intermittent streams at remote or not easily accessible sites, which are visited by personnel at infrequent ...