Refine by
Applications
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Incinerator solutions for the abattoir / slaughterhouse waste sector
- Incinerator solutions for the farm sector
- Solutions for Mining
- qCell T Series for Coagulation - Human Blood Research
- qCell T Series for Water Quality Analysis
- qCell T Series for Biofilm Analysis
- Solution for Water, Weather and Environment Monitoring
- qCell T Series for Cell Analysis
- qCell T Series for Polyelectrolyte Adsorption Studied
- Gas analysis for the environmental monitoring industry
- Industrial gas monitoring
- Stack gas emission monitoring for the energy industry
Xprt Equipment Supplied In Swaziland
619 equipment items found
Showcase
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS TB3 is a high-quality tipping bucket rain gauge for measuring rainfall and precipitation in urban and rural locations. Due to the integrated syphon, the gauge delivers high levels of accuracy across a broad range of rainfall intensities. With the optional heater the TB3 is the ideal device for cold ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
Conductivity sensors are measuring devices that measure the ability of a measuring medium to conduct electric current between two electrodes. The current flows by ion transport. This means that measuring media with a higher number of ions conduct the current better. A conductivity detector is used for digital measurements of conductivity in pure or process ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ easy-to-use rising stage sampler RSS is the ideal device for the automatic collection of samples from flashy, intermittent streams at remote or not easily accessible sites, which are visited by personnel at infrequent ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The ML-IoT/W data logger turns a TB7 tipping bucket rain gauge into an IoT precipitation monitor. The low-cost and low-power device including its antenna ?ts easily inside the TB7 enclosure. The ML-IoT/W collects the pulses from the rain gauge, accumulates them over a user-de?ned interval and sends periodic rain reports via WiFi connection. With its temperature sensor the ML-IoT/W provides a fair ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
For short to medium term gauging studies, the Riverina and Barossa Winches can be quickly mounted on the operating side support post, the discharge measurements taken and the winch packed up and moved to the next site. For permanent or long-term installations, the winch is generally located in a ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The Class A Evaporation Pan is a standard device for manual measurement of evaporation (Australian Bureau of Meteorology Class A type). The pan represents an open body of water: It is ?lled with water and exposed on a ?at plateau. The evaporation rate is calculated by the change in level of the free water surface (daily manual readings) and the recorded rainfall (in millimetres). Data can be ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ stream gauging winches are hand operated single drum winches capable of deploying sediment samplers or mechanical current meters with Columbus gauging weights. They can be deployed using a winch board (e.g. SAN22SS) or alternatively a bridge crane (e.g. 3WBC, ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ bed load samplers are designed to sample sand, silt, gravel or rock debris carried by a stream on or immediately above its bed. The BLS30 and BLS48 cable-suspended bed load samplers are used in natural streams for carrying coarse ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuest Solutions’ ultrasonic anemometers AR200 and WS200 provide precise and maintenance-free measurement of wind speed and wind direction. The compact devices are designed for applications in hydrology, meteorology and other weather-dependent applications where durability, precision and operations in different moderate climatic conditions are ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS' RainBal is a rain gauge that combines the highly accurate weighing principle with a self-emptying bucket mechanism. Equipped with a load cell, purpose built electronics and dedicated firmware, the rain gauge reliably delivers accurate high-resolution real-time ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS RainTrak is a proven product line offering a fully autonomous and integrated All-In-One Rain Gauging and Reporting Station. The complete package is delivered with all elements needed for easy and fast installation and ready to operate within minutes from deployment on any given site. Simply add a valid SIM card to enable network connection and off you ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The first radar sensor-based monitoring station for hydrology – built on embedded intelligence. Reduce infrastructure. Expand coverage. Water monitoring has looked the same for a long time. Traditional stations rely on multiple components — sensors, data loggers, telemetry, and power systems — all integrated into bulky setups assembled on site. Each new deployment adds ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The oxygen sensor uses luminescence-based optical measurement technology and measures reliably and precisely. The low maintenance and small amount of consumable materials needed by the sensor provide immediate returns on investment. Only the membrane cap must be replaced every two years. The sensor can also be used in applications with a very weak water flow. The oxygen sensor is available with a ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
An iBOX is the core of an hydrometeorological monitoring station. It combines data acquisition, data transmission and power management in a ready-to-be-deployed cabinet for outdoor installation. The electric cabinet housing (for either wall ort post mounting) of the iBOX includes an iRIS data logger, suitable power supply, surge protection, antenna, screw terminations and cable glands. The whole ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The KISTERS Tipping Bucket Rain gauge Model TB305 is recognised as the world standard for measuring rainfall and precipitation in remote and unattended ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The type A four wheel bridge crane 4WBC is a collapsible unit intended for stream discharge measurement or for stream sediment sampling from a bridge. The 4WBC can deploy Columbus weights and sediment samplers up to 70 ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The TTurb is a digital sensor for optical turbidity measurements according to the 90° IR scattered light method. Depending on the sensor it can be used in pure water up to 100 FNU as well as in raw-, waste- and process waters up to 1000 FNU. TTurb is available with a 10 m or a 2 m fixed ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ PreciBal is an innovative high-quality precipitation gauge using the weighing principle for measuring liquid, solid and mixed precipitation within a wide temperature range. It conforms to the most stringent requirements of the WMO. PreciBal is a low power device even during cold winter times by using anti-freeze agent to decrease the freezing point of collected water. The optional ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ tipping bucket heater TB3H is a thermostatically controlled heating element, that raises the temperature of the interior of the rain gauge, funnel and catch to avoid the freezing of the gauge in cold climates with subsequent loss of precipitation ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS’ Field Calibration Device FCD checks rain gauges in the ?eld for accuracy. The portable lightweight device effectively enables ?eld technicians to run functional tests and veri?cations of any rain gauge in the ?eld. The use of FCD saves time and money, because the tipping bucket rain gauges can remain ?xed in their location without the need for dismantling and transport and with ...