- Home
- switzerland
- Equipment
Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Air Pollution Measurements for Education
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Process Water Treatment for the Food and Drink Industry
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Pressure sensor for Water supply
- Moisture sensors for the construction and concrete industry
- Water sampling for the environmental industry
- Water treatment solutions for swimming pool water treatment
- Analytical instruments for gas chromatography
- Analytical instruments for mass spectrometry
- Analytical instruments for atomic spectroscopy
- Analytical instruments for elemental analysis
- Analytical instruments for thermal analysis
- Industrial solutions for the leak tester
- Industrial solutions for the thin film coating
- Industrial solutions for the carbon dioxide (CO2) lasers
- Medical solutions for the oxygenators
- Medical solutions for the ventilators and respiratory
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Continuous emissions monitoring solutions for sulfuric acid production plants
- Air pollution, emission and process monitoring systems for agriculture
- Environmental Technology for Document Destruction
- Water monitoring for the environmental industry
- Continuous emissions monitoring solutions for brick plants
- Continuous emissions monitoring solutions for power plants
- Air pollution, emission and process monitoring systems for metals
- Environmental Technology for Waste Disposal
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Continuous emissions monitoring solutions for chemical industry
- Continuous Emissions Monitoring solutions for flue gas treatment industry
- Analytical instruments for bioreactor and fermentor
- Pressure Sensor for Ground and surface water
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Environmental Technology for Paper and Packaging
- Environmental Technology for Disposal of Artificial Mineral Fibres
- Continuous emissions monitoring for glass manufacturing industries
- Water treatment solutions for cooling water treatment
- Chemiluminescense based analyzer for industrial sector
- Continuous emissions monitoring solutions for waste to energy plants
- Cleanrooms for Specialty Chemicals Sector
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Flow Solutions for Climate Change and Clean Energy
Xprt Equipment Supplied In Switzerland
14,259 equipment items found
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuant V is KISTERS’ state-of-the-art non-contact surface velocity 60 GHz V-band Doppler radar sensor. It offers superior resolution and accuracy, with reduced power consumption, all at an appealing price ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The multigas calibrator with GPT, ozone and self re-generable zero air generator, Sonimix 3012/3022, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, CO, NOx and O3. ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Made for everyday evaporation: Experience reliability and simplicity throughout your daily workflow. The Rotavapor® R-180 offers robust performance, intuitive design, and essential safety features, making it a smart addition to any laboratory. Evaporating flask size: up to 3 L. Lift mechanism: electric. Temperature range: up to 95 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Beaker flask 100 ml with rubber cap for direct connection to manifold valves including filter paper (75 μm, 100 pcs.) and O-ring (2 ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The high quality of the materials combined with cutting-edge technology of the compressor unit, ensure reliability, professionalism and economy allowing continuous use, unthinkable in traditional direct-drive oil-free compressors. The AirGen OFCAS 35 PLUS is the ideal compressor to supply all Zero Air generators ZA FID and ZA TOTAL or the high purity Nitrogen generator NG ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The NitroGen series NG CASTORE BASIC are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 99.5%. The NG CASTORE BASIC has been developed to meet specific requirements in terms of gas, flow, purity and pressure in LC-MS applications. It can be also used for the evaporation of solvents in samples ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The PermaCal has been developed in collaboration with the METAS (Swiss Federal Institute of Metrology). The most complex configuration consists in a double stage dilution and permeation system. The device can be available in a portable or rackable casing. The portable version is equipped with a battery and an internal pump with dryer that will provide flow to the permeation oven during the ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The PermaCal has been designed to easily generate different types of calibration gases like BTEX, SO2, Acetaldehyde, Formaldehyde, ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
It is engineered to transform standard compressed air into a safe, regulated supply of Nitrogen and Air up to 40 l/min with a suitable LC-MS purity grade. The CASTORE XS iQ SHI with its dual Nitrogen and Air outlets has been developed to meet specific requirements in term of gas, flow, purity and pressure for Shimadzu MS instruments such as LC-MS 8040, 8045, 8050, 8060. It can be used for LC-MS ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
894 Professional CVS manual is the introductory instrument for high-end determinations of organic additives in electroplating baths with "Cyclic Voltammetric Stripping" (CVS), "Cyclic Pulse Voltammetric Stripping" (CPVS) and chronopotentiometry (CP). The proven Metrohm electrode technique in combination with a completely newly designed potentiostat/galvanostat and the extremely high-performance ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
USB-capable control unit for connecting a maximum of four 800 Dosinos or 805 Dosimats for dosing and Liquid Handling tasks. A Touch Control or the connection to a PC with tiamo™, MagIC Net, viva or 797 VA Computrace is required for ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Synchronized sample solutions. Our parallel evaporation instruments offer synchronized sample solutions in two configurations: SyncorePlus Analyst lets you evaporate samples to a specified volume as a pre-analytical step. SyncorePlus Polyvap enables the highest sample ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The new Delta Hybrid direct driven sizes are the technological evolution of the AERZEN screw blower series. The future has just begun thanks to a super efficient newly designed stage with 3+4 rotors profile and a new drive concept for low pressure applications, a reduced footprint with side by side installation, a no-space adder Plug & Play solution with integrated starter, possibility to ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
Delta Hybrid is the perfect synthesis of positive displacement blower and screw compressor. Unlike the conventional positive displacement blower (max. 1,000 mbar), the innovative screw blower uses a new and unique 3+4 compressor profile, which is specially designed for low pressure applications up to 1,500 mbar. Delta Hybrid thus closes the gap in the previous machine mix and offers a wide range ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The PGSTAT128N MBA (Multi BA) is a special version of the PGSTAT128N which can be fitted with up to 6 working electrodes. Besides the main working electrode, 5 additional bipotentiostat modules (BA module) can be installed in the instrument, alongside the optional FRA32M module. Each BA module provides one additional working electrode. The multiple working electrodes can be used in the same ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Capacity range 25–100 m3/h, 10–4 bar. The compact rotary lobe pump pumps viscose and even abrasive media at up to 100 m³/h and also with reversible pumping direction thanks to its valveless construction. Housing, plunger and seals are available in different materials to match the medium. ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 100G-URL is an electrically actuated pneumatic on/off latching deluge valve designed for use in multiple applications. The 100G-URL can be actuated locally by relieving cover pressure through our EDVR (Emergency Deluge Valve Release) or remotely via solenoid. The 100G-URL will need to be reset locally by reengaging the latching ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Metrosep A Supp 5 - 50/4.0 separates the seven standard anions in less than 6 minutes. Even fluoride is still separated from the injection peak and can be integrated perfectly. Like all columns in the A Supp 5 product range, the column based on a polyvinyl alcohol polymer is characterized by high plate numbers and therefore by outstanding separating efficiency. The Metrosep A Supp 5 - 50/4.0 ...