- Home
- switzerland
- Equipment
Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Air Pollution Measurements for Education
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Process Water Treatment for the Food and Drink Industry
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Pressure sensor for Water supply
- Moisture sensors for the construction and concrete industry
- Water sampling for the environmental industry
- Water treatment solutions for swimming pool water treatment
- Analytical instruments for gas chromatography
- Analytical instruments for mass spectrometry
- Analytical instruments for atomic spectroscopy
- Analytical instruments for elemental analysis
- Analytical instruments for thermal analysis
- Industrial solutions for the leak tester
- Industrial solutions for the thin film coating
- Industrial solutions for the carbon dioxide (CO2) lasers
- Medical solutions for the oxygenators
- Medical solutions for the ventilators and respiratory
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Continuous emissions monitoring solutions for sulfuric acid production plants
- Air pollution, emission and process monitoring systems for agriculture
- Environmental Technology for Document Destruction
- Water monitoring for the environmental industry
- Continuous emissions monitoring solutions for brick plants
- Continuous emissions monitoring solutions for power plants
- Air pollution, emission and process monitoring systems for metals
- Environmental Technology for Waste Disposal
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Continuous emissions monitoring solutions for chemical industry
- Continuous Emissions Monitoring solutions for flue gas treatment industry
- Analytical instruments for bioreactor and fermentor
- Pressure Sensor for Ground and surface water
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Environmental Technology for Paper and Packaging
- Environmental Technology for Disposal of Artificial Mineral Fibres
- Continuous emissions monitoring for glass manufacturing industries
- Water treatment solutions for cooling water treatment
- Chemiluminescense based analyzer for industrial sector
- Continuous emissions monitoring solutions for waste to energy plants
- Cleanrooms for Specialty Chemicals Sector
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Flow Solutions for Climate Change and Clean Energy
Xprt Equipment Supplied In Switzerland
14,249 equipment items found
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Zeta 630 increases productivity in control cabinet construction with two process modules from batch size 1 and with up to 36 different wires in the wire changer. The wide variability of control cabinet construction requires many materials such as wire types, terminals or ferrules. The Zeta 630 allows just-in-time processing in batch or sequence production of various wires for cabinet building ...
Showcase
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Model 100-01 is the basic valve used in nearly all Cla-Val automatic control valves. It is the valve of choice for system applications requiring remote control, pressure regulation, solenoid operation, rate of flow control, liquid level control or check valve ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
Cla-Val Models 90-01 and 690-01 Pressure Reducing Valves automatically reduce higher inlet pressure to a steady lower downstream pressure, regardless of changing flow rate and/or varying inlet pressure. Each valve is an accurate, pilot-operated regulator capable of holding downstream pressure to a pre-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuant V is KISTERS’ state-of-the-art non-contact surface velocity 60 GHz V-band Doppler radar sensor. It offers superior resolution and accuracy, with reduced power consumption, all at an appealing price ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The preparative version of the Sepmatix 8x HPLC system has an HPLC pump that is equipped with a 100 ml pump head, the max. operating pressure is 400 bar. Flow rates per channel 3.0 to 8.0 ml/ min. For parallel collection of fractions from all 8 channels, the system is additionally equipped with 8 fraction collectors, which are combined in a compact collector module. In the standard version the ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The AirGen series KZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID Air can purify up to 15 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The PermaCal has been developed in collaboration with the METAS (Swiss Federal Institute of Metrology). The most complex configuration consists in a double stage dilution and permeation system. The device can be available in a portable or rackable casing. The portable version is equipped with a battery and an internal pump with dryer that will provide flow to the permeation oven during the ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The NitroGen series NG CASTORE BASIC are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 98.5%. The NG CASTORE BASIC has been developed to meet specific requirements in terms of gas, flow, purity and pressure in LC-MS applications. It can be also used for the evaporation of solvents in samples ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The NitroGen series NG CASTORE XL iQ use Membrane technology. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 70 L/min with a purity up to 99.8%. This NG series is equipped with a scroll built-in oil less compressor with inverter technology. The new iQ series is equipped with the innovative direct drive motor-compressor system that result ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The Vacuum Pump V-80 / V-180 is a chemically resistant and affordable vacuum source with a compact design. The speed-control solution guarantees the vacuum pump operates quietly and without ...