Refine by
Applications
- Wastewater Treatment Systems for Biological Wastewater Treatment
- Analytical instruments for pharma & life science industry
- Analytical Instruments for Wastewater Analysis
- Analytical Instruments For Soil And Sludge Analysis Applications
- Analytical instruments for analyzing refinery products
- Analytical Instruments for Chemical Analysis of Biofuels and Synthetic Fuels
- Analytical instruments for analyzing petrochemicals
- Elemental analysis for the agriculture industry
- Elemental analysis for the energy industry
- Analytical Instruments for Oil and Gas Industry
- Elemental Analysis for the Chemistry & Materials Industry
- Analytical instruments for food processing & packaging applications
- Analytical Instruments for Analysis of Soils and Fertilizer
- Analytical Instruments for Analyzing by-Products, Effluents and Waste
Xprt Equipment Supplied In Tanzania
781 equipment items found
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
ZEEnit is the plus in your laboratory. It convinces with its cost efficiency, fast and reliable analysis and excels in the analysis of samples with high ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Universal use for the following applications: Semi-dry blotting, tank blotting, capillary blotting, gel drying, gel wicking, ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
Sludge dewatering treatment with Sludge Screw Press effectively generates dewatered cake with high dry solids content. The water will be sent back to the buffer tank or the septic tank. A sludge Screw press dewatering machine is a good solution for wastewater systems ranging in size from 150 to 1.500 ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
The CyBio Well vario includes an automated base which accepts different interchangeable simultaneous pipetting heads. The heads can be changed quickly and easily either at the front or the back of the instrument. After head exchanges the calibration maintains. A working volume range of four orders of magnitude allows liquid transfers from 25 nl up to 250 µl on one platform, either with 96 ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For adsorption of moisture, solid and gaseous decomposition ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube Saturn systems are installed above ground. In Saturn systems, the focus is on reducing initial cost of civil ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
When mineralizing organic matter in the sludge, 60-70 per cent of the dry matter is transferred into C02, oxygen, free nitrogen and partly dewatered soil particles. The sludge is dewatered, depending on the local climate, to a dry matter content of 35% to 60% within two to three weeks. In the long term the sludge will be reduced to 2-4% of the originally applied volume. This reduces management ...
Premium
Manufactured by:Casella based inKempston, UNITED KINGDOM
Ideal for area sampling of airborne contaminants including Asbestos and other hazardous materials. The award-winning Vortex3 is the latest generation of static, high flow rate sampling pumps, which can now be controlled and monitored from your mobile phone or tablet. ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The central management, supply and control unit displays the measured values and messages of the connected Sensors which measure the concentration of different gases in ambient air. The Monitor allows to display and record the measured values as well as to register messages. The potential-free relays serve for controlling further warning systems. Up to 32 Sensors can be controlled and monitored. ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
This bag is a simple and cost-effective system for collecting measuring gas in case it cannot be returned directly into the circuit breaker. Its handling is very easy: Connect the bag with the hose included in the scope of supply to the measuring device. The discharge gas collecting bag allows collecting the SF6 from up to 25 measurements. The gas can be removed by means of any service cart. When ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The unique combination of mass flow meter and fi lling device facilitates the SF6 gas monitoring considerably. This device does not only enable the registration of the quantities filled in, but allows the automatic filling of a gas compartment at the same time. Thus the operator can select the indication of the gas quantity required or the preset filling value. After having pressed the start key, ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Integrated pressure monitoring for leak control. Special features: Complete realisation, ranging from the design to the commissioning. Piping systems can be realized in various materials, e.g. in copper or stainless steel. Integration into existing fabrication hall construction is possible. Use of gastight DILO unions without intermediate seal compound. Production in nominal diameters of up to ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
A sludge truck will be the preferred solution for small to medium size systems. With the sludge truck, the sludge is transported to another location where it is processed. The treatment process here will typically be a large wastewater treatment system, a local dewatering system or a root zone system. For up to 10 m3 / day systems, the desludging will take place once a year. For larger ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Standard membranes for protein and nucleic acid blotting. Standard membranes for protein and nucleic acid blotting. Excellent sensitivity, resolution and low background. Superior mechanical strength. Compatible with a variety of assays and detection ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube UltraCLean system is an advanced water treatment device designed for removing all particles including bacteria and Nematodes from river water and other natural water sources. The water is treated by means of an extremely durable and efficient, third generation ultra-filtration membrane placed in an aeration ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
The BioKube BioReactor is most commonly used for treating wastewater from smaller villages and factories and retro fit with daily wastewater outlet of more than 100 m³. The system is designed for placement in in-situ casted concrete ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Starter series for medium-sized gas compartments The service carts of the Compact series for gaseous or liquid storage offer the best entry into professional gas handling. Equipped with the well-proven DILO components these service carts allow the recovery, filling and purification of SF6 gas as well as the evacuation of air and venting of medium-sized gas compartments. Depending on the device ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
This series is very powerful and allows quick evacuation of large gas compartments. A vacuum pump combined with a Roots pump enables to obtain a final vacuum of 2x 10-2 mbar. Thus not only air but also moisture is removed from the circuit breakers. Therefore the subsequent filling process is prepared perfectly. Three coupling connections (DN20 and 2 x DN40) allow the evacuation of two gas ...