Refine by
Applications
- Process analyzers & instruments for continuous emissions monitoring (CEM)
- Process analyzers & instruments for oxygen measurement
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Gas safety and process control for gas/oil/coal-fired power generation and refineries
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Process analyzers & instruments for NOx reduction
- Process analyzers & instruments for furnace atmosphere control
- Process analyzers & instruments for combustion efficiency and fuel air ratio
Stack Sampling Equipment Supplied In Turkey
16 equipment items found
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The dry extractive SEC system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. Optional built-in temperature & velocity sensors or STACKFLOW 200 flow meter on the same ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Gas Sampling system for use in combination with low concentration analyzers (Ambient Air ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The CP5 is a modern version of the classic unheated cold sample probe for the isokinetic sampling of particulate matter in stack emissions. The CP5 design and construction follow the philosophy of being easy and practical to use on the stack. The CP5 is fully realized in AISI316 and is supplied including the AISI316 inner tube, ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The ST5 is the next generation isokinetic sampler, developed to be efficient, rugged, accurate and user friendly. The perfect companion for stack testers. The ST5 includes all the measuring sensors inside its robust structure making it a single practical device to be taken on the stack and reducing the need of maintenance. Meets and exceeds the requirements ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The SC5 is used as a cooling bath for impinger trains or as a chiller with recirculation capabilities for the condensing of micropollutants such as PCDD/PCDF, Heavy Metals etc. Thanks to wide plastic internal bath, it’s possible to place the complete glass set within the SC5 and use it condensation/absorber train for long lasting sampling. The sliding lock allows the device to be completely ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The ST5 is the next generation isokinetic sampler, developed to be efficient, rugged, accurate and user friendly. The perfect companion for stack testers. The ST5 includes all the measuring sensors inside its robust structure making it a single practical device to be taken on the stack and reducing the need of maintenance. Precise isokinetic condition, ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this also allows it to be easy to move it with just two ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
MVS 2M is a multichannel system allowing to distribute two, three or four channels of fluids and signals to a gas monitoring system (GMS). Its function is to link the GMS with the sampling systems for gas and span gas, and to allow the redundancy ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
The CWF range of general purpose laboratory chamber furnaces is bench mounted. Models are available in five sizes with a maximum operating temperature up to 1300 °C. The airflow in the CWF-B furnaces is enhanced by the addition of air inlet holes in the door and a tall chimney which rapidly removes the fumes from the furnace. ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
UNITY–ULTRA-xr Pro™ is our highest capacity, automated thermal desorption system for the unattended sampling of up to 199 sample tubes in a single sequence. Its automated re-collection of tube and trap desorption split flows is unique to Markes and provides the most comprehensive re-collection options and enhanced sample security. It is ideal for laboratories needing to rapidly ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
UNITY–ULTRA-xr™ is an automated thermal desorption system for the rapid and unattended sampling of up to 100 sorbent tubes in a single sequence. Additional options include autosamplers for canister, bag or on-line analysis. The UNITY–ULTRA-xr is the ideal platform for labs requiring the flexibility to expand their capabilities to extended analyte ranges and varied sample types ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
TD100-xr™ is an automated thermal desorption system for the rapid and unattended processing of up to 100 × 3½-inch sorbent tubes in a single sequence. It’s the perfect thermal desorption unit for high-throughput analytical laboratories needing to process large numbers of tube-based samples ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
The CEM Oxygen (CEM/O2) analyzer is designed to measure net oxygen content in flue gas and process applications, for emissions control, product quality and process efficiency. With a compact footprint for easy integration, the analyzer is designed for use in wet or dry gas continuous emissions monitoring (CEM) systems, particularly in applications where the sample is extracted to a remote ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
WDG-HPII Series analyzers offer unique chimney-effect/convective sampling technology that combines the advantages of insitu probe high-particulate sampling with the high temperature and corrosion resistance of extractive analyzers. With a high-particulate filter and weatherproof sensor enclosure, the analyzer is ideal for measurements of O2, combustibles and methane, and is completely field ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Certified Ultra-Low Emissions Burner (CEB) is an ultra-low emissions vapor device that utilizes premix surface combustion to effectively combust waste gases in a compact footprint. With VOC destruction efficiencies of up to 99.99% and a NOx emissions guarantee of ≤ 15 ppmv at 3% oxygen, carbon monoxide emissions guarantee of, smokeless operation and no luminous flame, the CEB is the best ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
For highly selective gas measurements of one or two gases, Tunable Diode Laser Absorption Spectroscopy (TDLAS) has been introduced by Protea into compact and easy to use industrial gas analyser ...