Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- High Performance Preparation Technology for Dry Mortar and Plaster
- Mixing and Grinding Technology for Sand Lime Brick
- Preparation Technology for the Ceramic Industry
- Cutting-Edge Technologies for Refractory Compounds
- Mixing and Grinding Technology for Preparation of Glass Batches
- Mixing and Grinding Technology for Lead Acid Paste
- Trailblazing Process Technology for Lithium-Ion Batteries
- Preparation Technology for Friction Lining Compounds
- Mixing and Grinding Technology for Foundry Sand
- Preparation Technologies for Metallurgy
- Mixing and Grinding Technology for Environmental
- Eirich System Solutions for Fertilizer
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Machines And Systems For Processing Carbon Paste
- Industrial Waste Shredders for Waste to energy
- Water monitoring instruments for surface water monitoring
- Air pollution, emission and process monitoring systems for agriculture
- Air pollution, emission and process monitoring systems for metals
- Flame Photometer for Measurement of Lithium Sea Water
- Flame Photometer for Determination of Na in Biodiesel using Dry Decomposition for Sample Preparation
- Flame Photometer for Measurement of Na, K and Ca in Plant Extracts
- Flame Photometer for Measurement of Potassium and Sodium in Wine
- Air pollution, emission and process monitoring systems for minerals
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- Water monitoring instruments for groundwater monitoring
- High-end baling and waste compacting solutions for cardboard sector
- High-end baling and waste compacting solutions for hollow containers and plastic bottles sector
- High-end baling and waste compacting solutions for mixed paper sector
- High-end baling and waste compacting solutions for plastic film sector
- High-end baling and waste compacting solutions for newspaper sector
- High-end baling and waste compacting solutions for RDF, SRF and MSW sector
- Air pollution, emission and process monitoring systems for food & pharma
- Optical emission spectrometers instruments solutions for metals industry
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Air pollution, emission and process monitoring systems for power generation
- Landfill Compactor for Landfill Operations
- Optical emission spectrometers instruments solutions for material science industry
- Process analyzers & instruments for thin film/semiconductor/PVD
- Flame Photometer for Potassium Extraction from Soil
- Flame Photometer for Recommended Sample Handling Techniques & Considerations
- Flame Photometer for Measurement of Calcium in Serum & Urine
- Flame Photometer for Measurement Of Lithium In Saliva Sector
- Flame Photometer for Measurement of Calcium in DNA and DNP
- Flame Photometer for Measurement of Potassium in Unashed Plant Leaves
- Flame Photometer for Calcium in Unashed Plant Leaves
- Flame Photometer for Measurement of Calcium in Biological Samples
- Flame Photometer for Measurement of Trace Elements in Biodiesel
- Flame Photometer for Units of Concentration
- Flame Photometer for Measurement of Calcium and Potassium in Cereals
- Flame Photometer for Measurement of Sodium and Potassium in Silicate Rocks
- Flame Photometer for Measurement of Sodium and Potassium in Cheese
- Flame Photometer for Measurement of Potassium and Sodium in Bread
- Flame Photometer for Measurement of Potassium and Sodium in Meat
- Flame Photometer for Measurement of Calcium in Fresh Fruit
- Flame Photometer for Determination of Na and K using Emulsions and Microemulsions for Sample Preparation
- Flame Photometer for Salinity in Processed Foods
- Flame Photometer for Determination of Sodium in Biodiesel by Flame Atomic
- Flame Photometer for Measurement of Low Concentrations of Sodium in Cement
- Flame Photometer for Measurement of Sodium and Potassium in Dried Milk
- Flame Photometer for Measurement of Lithium in Minerals
- Mixing Technology for Concrete
Xprt Equipment Supplied In Ukraine
3,753 equipment items found
Showcase
Manufactured by:Maschinenfabrik Gustav Eirich GmbH & Co KG based inHardheim, GERMANY
Our granulating and pelletizing mixers perform mixing and granulating/pelletizing in a single machine. Eirich has comprehensive know-how in granulating and pelletizing ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
Electropure™ EDI technology has now been brought down in size. Zapwater™ EDI modules are designed for small countertop or wall-mount laboratory water deionization products, which produce ASTM Type I & II, or JIS A2 to A4 water. Zapwater™ customers can expand their existing laboratory RO/DI/UF product lines to include an EDI-based product. It will be easy to incorporate the ...
Showcase
Manufactured by:Galaxy Scientific Inc based inNashua, NEW HAMPSHIRE (USA)
The QuasIR™ 4000 FT-NIR spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. It was engineered to ensure direct calibration transfer ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
Electropuretm EDI technology has fundamental advantages and differences from other EDI products. There are similarities to other EDIs, but Electropure EDI has 4 major technical ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
Nanofiltration (NF) is a membrane separation process. NF membranes pass water and reject ionic and non-ionic species based on both size and charge. Nanofiltration is not simply “loose RO”, and does more than “pass more ions than an RO” (as the phrase implies). Nanofiltration membranes are tuned to perform the specific separation the customer needs. Each NF manufacturer ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
ELECTROPURE EXL-750 EDI modules are designed to be the highest rejection EDI modules on the market. EXL is configured to easily build ultrapurc water systems with the well-known benefits of Electropure EDI technology. The EXL-750 can achieve high qualify even with 1-Puss RO, saving you ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure's ExcellPureRO™ membranes are uniquely designed for high rejection of silica. Achieving low silica is important for many applications, including providing feedwater for electrodeionization (EDI) systems. We have matched these SXR™ membrane elements to specific Electropure™ EDI ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
XL-SR Electropure EDI products can handle a range of flows from 50 l/h to 2.3 m3/hr (10 gpm), depending on the specific requirements of the customer. These are designed for periodic cold sanitization using peroxide/peracetic acid (for example Minncare Cold Sterilant). ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
The DemandPure™2 KISS EDI is the simplest way to replace Commercial & Industrial portable exchange DI and to provide a recurring revenue (BOO or BOOT) solution to dealers whenever an exchange tank solution is not economic or welcomed. DemandPure™2 KISS EDI Keep It Simple Systems™ are completely automatic and can easily be installed after an RO, and left in place with no need ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
ELECTROPURE EXL-850 EDI modules are designed to be the highest rejection EDI modules on the market. EXL is configured to easily build ultrapurc water systems with the well-known benefits of Electropure'" EDI technology. The EXL-850 can achieve belter quality even with 1-Pass RO, saving you ...
Premium
Manufactured by:Maschinenfabrik Gustav Eirich GmbH & Co KG based inHardheim, GERMANY
With the different features of the new generation, we now offer exactly the solution that will take you ...
Premium
Manufactured by:Maschinenfabrik Gustav Eirich GmbH & Co KG based inHardheim, GERMANY
Flexible high-performance mixing system for challenging tasks in the fields of research, development and small-scale production. Process materials from dry to plastic and pasty can be processed. With enhanced operating comfort. Effective volume up to 10 liters for high demands in research, development and ...
Premium
Manufactured by:Maschinenfabrik Gustav Eirich GmbH & Co KG based inHardheim, GERMANY
Flexible high-performance mixing system for challenging tasks in the fields of research, development and small-scale production. Process materials from dry to plastic and pasty can be processed. Effective volume up to 5 liters for research, development and production. The proven ...
Premium
Manufactured by:Maschinenfabrik Gustav Eirich GmbH & Co KG based inHardheim, GERMANY
The range of options for exercising more accurate control over product properties can be broadened by supplementing the Eirich mixing technology with task-specific peripheral drying equipment. Fundamental process engineering operations such as mixing, granulating, heating, reacting, drying, cooling can be implemented simultaneously or one after the other in just a single ...
Premium
Manufactured by:Scientific and manufacturing Firm (SMF) `Prodecologia` based inRivne, UKRAINE
Designed for extracting magnetic impurities and accidental metal objects (screws, nuts, etc.) automatically from bulk materials transported by the conveyor ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure’s ExcellNano™ process NF membranes are uniquely designed for special industrial process separations. Based on 2-layer chemistry, the thin-film PA microscopic surface is tough and highly selective. These proprietary aromatic membranes are a selective-rejection chemistry, and are available only from ...
Premium
Manufactured by:Maschinenfabrik Gustav Eirich GmbH & Co KG based inHardheim, GERMANY
Our new intelligent system monitors granules literally “in passing”. A special camera is used to continuously take, process, and analyze pictures of the product conveyor belt. Numerous parameters and product properties are identified and calculated from these images. The quality parameters can be evaluated by the operator or by artificial ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
High Temperature Stable EDI for Pharmaceutical OEMs Now to 85°C. Key Benefits Include: Hot Water Sanitizable at 85°C / 185°F. 15 min up to 2 hrs (see USP recommendations). Rapid Heat/Cool Cycle — up to 160 cycles. New High Temperature FDA Urethane Materials. Pharmaceutical Stainless Steel (EXL option). Light, Compact, Easy to Ship and ...