Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- High Performance Preparation Technology for Dry Mortar and Plaster
- Mixing and Grinding Technology for Sand Lime Brick
- Preparation Technology for the Ceramic Industry
- Cutting-Edge Technologies for Refractory Compounds
- Mixing and Grinding Technology for Preparation of Glass Batches
- Mixing and Grinding Technology for Lead Acid Paste
- Trailblazing Process Technology for Lithium-Ion Batteries
- Preparation Technology for Friction Lining Compounds
- Mixing and Grinding Technology for Foundry Sand
- Preparation Technologies for Metallurgy
- Mixing and Grinding Technology for Environmental
- Eirich System Solutions for Fertilizer
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Machines And Systems For Processing Carbon Paste
- Industrial Waste Shredders for Waste to energy
- Water monitoring instruments for surface water monitoring
- Air pollution, emission and process monitoring systems for agriculture
- Air pollution, emission and process monitoring systems for metals
- Flame Photometer for Measurement of Lithium Sea Water
- Flame Photometer for Determination of Na in Biodiesel using Dry Decomposition for Sample Preparation
- Flame Photometer for Measurement of Na, K and Ca in Plant Extracts
- Flame Photometer for Measurement of Potassium and Sodium in Wine
- Air pollution, emission and process monitoring systems for minerals
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- Water monitoring instruments for groundwater monitoring
- High-end baling and waste compacting solutions for cardboard sector
- High-end baling and waste compacting solutions for hollow containers and plastic bottles sector
- High-end baling and waste compacting solutions for mixed paper sector
- High-end baling and waste compacting solutions for plastic film sector
- High-end baling and waste compacting solutions for newspaper sector
- High-end baling and waste compacting solutions for RDF, SRF and MSW sector
- Air pollution, emission and process monitoring systems for food & pharma
- Optical emission spectrometers instruments solutions for metals industry
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Air pollution, emission and process monitoring systems for power generation
- Landfill Compactor for Landfill Operations
- Optical emission spectrometers instruments solutions for material science industry
- Process analyzers & instruments for thin film/semiconductor/PVD
- Flame Photometer for Potassium Extraction from Soil
- Flame Photometer for Recommended Sample Handling Techniques & Considerations
- Flame Photometer for Measurement of Calcium in Serum & Urine
- Flame Photometer for Measurement Of Lithium In Saliva Sector
- Flame Photometer for Measurement of Calcium in DNA and DNP
- Flame Photometer for Measurement of Potassium in Unashed Plant Leaves
- Flame Photometer for Calcium in Unashed Plant Leaves
- Flame Photometer for Measurement of Calcium in Biological Samples
- Flame Photometer for Measurement of Trace Elements in Biodiesel
- Flame Photometer for Units of Concentration
- Flame Photometer for Measurement of Calcium and Potassium in Cereals
- Flame Photometer for Measurement of Sodium and Potassium in Silicate Rocks
- Flame Photometer for Measurement of Sodium and Potassium in Cheese
- Flame Photometer for Measurement of Potassium and Sodium in Bread
- Flame Photometer for Measurement of Potassium and Sodium in Meat
- Flame Photometer for Measurement of Calcium in Fresh Fruit
- Flame Photometer for Determination of Na and K using Emulsions and Microemulsions for Sample Preparation
- Flame Photometer for Salinity in Processed Foods
- Flame Photometer for Determination of Sodium in Biodiesel by Flame Atomic
- Flame Photometer for Measurement of Low Concentrations of Sodium in Cement
- Flame Photometer for Measurement of Sodium and Potassium in Dried Milk
- Flame Photometer for Measurement of Lithium in Minerals
- Mixing Technology for Concrete
Xprt Equipment Supplied In Ukraine
3,753 equipment items found
Showcase
Manufactured by:Scientific and manufacturing Firm (SMF) `Prodecologia` based inRivne, UKRAINE
Designed for wet beneficiation of weakly magnetic ores or for the purification of non magnetic materials from weakly magnetic ...
Showcase
Manufactured by:Galaxy Scientific Inc based inNashua, NEW HAMPSHIRE (USA)
The QuasIR™ 4000 FT-NIR spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. It was engineered to ensure direct calibration transfer ...
Showcase
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
Electropure™ EDI technology has now been brought down in size. Zapwater™ EDI modules are designed for small countertop or wall-mount laboratory water deionization products, which produce ASTM Type I & II, or JIS A2 to A4 water. Zapwater™ customers can expand their existing laboratory RO/DI/UF product lines to include an EDI-based product. It will be easy to incorporate the ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
XL-R Electropure EDI products can handle a range of flows from 50 l/h to 2.3 m3/hr (10 gpm), depending on the specific requirements of the customer. These are designed for rugged industrial EDI systems, whether made from PP or PVC or Stainless ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure’s ExcellNano™ process NF membranes are uniquely designed for special industrial process separations. Based on 2-layer chemistry, the thin-film PA microscopic surface is tough and highly selective. These proprietary aromatic membranes are a selective-rejection chemistry, and are available only from ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Premium
Manufactured by:Maschinenfabrik Gustav Eirich GmbH & Co KG based inHardheim, GERMANY
Our new intelligent system monitors granules literally “in passing”. A special camera is used to continuously take, process, and analyze pictures of the product conveyor belt. Numerous parameters and product properties are identified and calculated from these images. The quality parameters can be evaluated by the operator or by artificial ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure has been providing EDI technology to the pharmaceutical and medical markets since 1987. We have installations in over 75 countries including the United States, India, Europe, Japan, China, and Southeast Asia. Our EDI products are integral components in validated installations that require complying with the harmonized USP (US Pharmacopoeia), JP (Japanese Pharmacopoeia), and EP (European ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure has developed a kit of tools to help our OEM customers design & market Electropure™ EDI for their pure water customers. It can be sent electronically via e-mail, or mailed via USB memory sticks (with a printed version of SnowPure’s Best Practices P&IDs). To save paper and help the environment, we try not to print brochures as much as possible. However, hardcopy-color ...
Premium
Manufactured by:Maschinenfabrik Gustav Eirich GmbH & Co KG based inHardheim, GERMANY
Dry grinding – continuous: for fine grinding of industrial minerals. ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure’s Excellion™ ion-exchange membranes are uniquely designed for e-coat paints, electrodialysis (ED), electrochemical separations, deionization processes, and are used in SnowPure’s own electrodeionization (EDI) ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
XL-SR Electropure EDI products can handle a range of flows from 50 l/h to 2.3 m3/hr (10 gpm), depending on the specific requirements of the customer. These are designed for periodic cold sanitization using peroxide/peracetic acid (for example Minncare Cold Sterilant). ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
In kidney dialysis, the purity of water is critical in order to protect patients from harmful contaminants like endotoxins. Endotoxins are byproducts of dead bacteria killed in the water purification system, and when not removed, may trigger fevers in patients. Since this water is in contact with a patient's own blood, it is critical to reduce endotoxins to the lowest possible level. In a recent ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
SnowPure's ExcellPureRO™ membranes are uniquely designed for high rejection of silica. Achieving low silica is important for many applications, including providing feedwater for electrodeionization (EDI) systems. We have matched these SXR™ membrane elements to specific Electropure™ EDI ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
High Temperature Stable EDI for Pharmaceutical OEMs Now to 85°C. Key Benefits Include: Hot Water Sanitizable at 85°C / 185°F. 15 min up to 2 hrs (see USP recommendations). Rapid Heat/Cool Cycle — up to 160 cycles. New High Temperature FDA Urethane Materials. Pharmaceutical Stainless Steel (EXL option). Light, Compact, Easy to Ship and ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
Electrodialysis (ED) & Electrodialysis Reversal (EDR) are used around the globe in many industrial, laboratory and recycling environments. ED is an industrial membrane separation process in which ions are transported through ion-permeable membranes, from one stream to another, under the influence of a voltage potential gradient. The electrical charges on the ions allow them to be driven ...
Premium
Manufactured by:Scientific and manufacturing Firm (SMF) `Prodecologia` based inRivne, UKRAINE
Designed both for dry beneficiation of ore and non-metallic materials as well for cleaning of different nonmagnetic materials from magnetic ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
XL-HTS High Temperature Stable Sanitary Electropure EDI modules cover a range of flows from 50 l/h to 2.3 m3/hr (10 gpm) depending on the specific requirements of the customer. These are designed for periodic hot (or cold) sanitization. The modules are stable for heat cycling up to 85ºC, for over 104 cycles. Normal hot water sanitization is ...
Premium
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
Electrodialysis (ED or EDR) is used around the globe in many industrial, laboratory and recycling environments. EDR is an industrial membrane separation process in which ions are transported through ion- permeable membranes, from one stream to another, under the influence of a voltage potential gradient. If the ED is symmetrical, it can be run in EDR reversal mode to keep fouling to a ...