- Home
- Equipment
- united kingdom
- sample processing system
Refine by
Applications
- Water treatment solutions for cooling water treatment
- Water treatment solutions for utility water treatment
- Process analyzers & instruments for trace carbon monoxide
- Process analyzers & instruments for trace carbon dioxide
- Process analyzers & instruments for trace hydrogen
- Process analyzers & instruments for trace methane
- Process analyzers & instruments for thin film/semiconductor/PVD
- Solutions for waste water treatment
- Water treatment solutions for swimming pool water treatment
- Process analyzers & instruments for CO emissions
- Process analyzers & instruments for atmospheric sampling reactive gases and CVD
Sample Processing System Equipment Supplied In United Kingdom
20 equipment items found
Manufactured by:Endecotts Ltd based inLondon, UNITED KINGDOM
Endecotts hand held sample dividers will subdivide material samples into two smaller portions by a single pass.Further subdivisions can be attained by multiple passes.Each subdivision created with an Endecotts sample divider retains the characteristics of the original sample. Two different sample divider versions are available: One with 1/2" slot width and one with 1/4" slot ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Typical measuring range -1,500...+1,500 mV; wider ranges are possible depending on the measuring device. ORP measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Can be used in water treatment or industrial process waters with strict requirements. ...
Manufactured by:Endecotts Ltd based inLondon, UNITED KINGDOM
The Consistometer is a low cost, durable, instrument for accurately checking laboratory or production samples against consistency, viscosity or flow rate standards.It uses little bench space and is yet probably the simplest, most accurate method of conducting a variety of flow associated tests. It is already widely used in the chemical, paint, cosmetic and food processing industries. The ...
Manufactured by:Applied Physics based inTampa, FLORIDA (USA)
Crafted from clear anodized aluminum and featuring three seals for enhanced sealing performance, this assembly ensures reliable and accurate sampling in horizontal airflow ...
Manufactured by:Mettler - Toledo Int. Inc based inGreifensee, SWITZERLAND
To understand and optimize chemical reactions over a wide range of temperature and pressure conditions, chemists and chemical engineers require in-depth reaction information. This data has traditionally been obtained via offline techniques that require extraction and sample preparation which is therefore not a true representation of the reaction components. ReactIR 45m is a ...
Manufactured by:Mettler - Toledo Int. Inc based inGreifensee, SWITZERLAND
Organic chemists and scientists strive to improve the research and development of chemical compounds, synthetic chemical routes and processes. In situ reaction monitoring tracks concentration changes of key reactive and transient species to understand mechanism pathway, determine kinetics and detect major reaction events. ReactIR 15 is a real-time, in situ mid-infrared based system designed to ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Graduated measuring ranges 0.05 – 100 mg/l. Accurate measurement of fluoride with DULCOTEST sensors in the monitoring of potable water and waste water, suitable for pH values up to ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Graduated pH measuring ranges 0 – 14. pH measurements with DULCOTEST sensors: Precise, reliable and application-adapted measured values in real time. Control, regulate and monitor chemical processes with the aid of precise measured ...
Manufactured by:Tekpro Limited based inNorth Walsham, UNITED KINGDOM
The Holmen NHP300 Pellet Durability Tester is ideally suited to a busy, quality focused mill. Samples are automatically taken from the production line, the machine tests the pellets by agitating them with air at a fixed 70mBar pressure, returns them to the line, and a PDI result is provided to the NHP300 control software, or to your current mill management software without manual input from the ...
Manufactured by:Modcon Systems Ltd. based inHaymarket, UNITED KINGDOM
The Sample Recovery System offered by Modcon is designed to collect spent samples from on-line process analyzers and periodically return these samples back to the process ...
Manufactured by:P S Analytical Limited based inOrpington, UNITED KINGDOM
The PSA 10.690 Online Hg Preconcentration system is used in conjunction with the PSA 10.670 Online Hg Analyser system and has been specifically designed to monitor the mercury concentration in multiple liquid-phase volatile hydrocarbon samples. The Preconcentrator System is physically divided into two interconnected cabinets, this arrangement allows the separation of heat sensitive electronic ...
Manufactured by:Thyson Technology based inEllesmere Port (Cheshire), UNITED KINGDOM
Sample systems remain the key to a successful and reliable analyser system. To deliver reliable, accurate results it is essential to use a sample system which conditions the sample to the requirements of the analyser, and then to ensure it is well maintained and properly calibrated against a laboratory reference. ...
Manufactured by:Industrial Physics Product Integrity Limited based inThame, UNITED KINGDOM
Providing precise moisture measurement in process gas analysis. The MM500 moisture analyzer is designed to be customised to your application providing an absolute measurement of moisture in gas with precise results over a wide range of 0.1 ppm to 1000 ppm. Unit of measurement can be selected from ppmv or dew point (°C or ...
Manufactured by:IKA-Werke GmbH & Co. KG based inStaufen, GERMANY
The photobioreactor Algaemaster 10 control is the perfect equipment supporting scientists to find and recreate the ideal environmental conditions for growing phototrophic organisms such as microalgae. These are of increasing interest for drug discovery in the pharmaceutical industry. With our seawater resistant and autoclavable system, you are more than well prepared for your specific research ...
Manufactured by:Hiden Analytical Ltd. based inWarrington, UNITED KINGDOM
The HPR-30 Series are residual gas analysis systems configured for analysis of gases and vapours in vacuum processes and for vacuum diagnostics with sampling capability from high vacuum to atmospheric pressure. The systems are fully configurable for individual process applications such as CVD, ALD, plasma ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Metrohm Inline Sample Preparation (MISP) puts an end to manual sample preparation for ion chromatography. MISP stands for methods developed by Metrohm that allow you to fully automate the preparation of even the most challenging samples. Not only will you increase sample throughput but also improve accuracy and reproducibility of analyses and ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
The FS10A is a universal flow switch and monitor specifically designed for gas and liquid process analyzer sampling systems. The FS10A is a fast responding, highly repeatable sensor which installs easily into a standard tube tee fitting or new SP76 (NeSSI) modular manifold. The FS10A utilizes proven thermal dispersion flow measurement technology ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
Designed for modern ultra-high-purity (UHP) gas applications, the ta7000 series measures impurities at extremely low, parts-per-trillion (ppt) levels, using either a reduction gas detector or flame ionization detector. Employing an advanced algorithm that isolates measurement signals while filtering out random electronic noise, the analyzer delivers unparalleled sensitivity. This results in an ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
The ta5000 series of isothermal gas chromatographs is available in two models, offering either a reduction gas detector or flame ionization detector. Measuring at a low detection limit, these analyzers provide extremely sensitive measurements from parts-per-million (ppm) to low parts-per-billion (ppb) levels, and negligible matrix effects from permanent ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
Available in two models, the ta3000 gas analyzer is an isothermal gas chromatograph that can be configured with a reduction gas detector or flame ionization detector. The analyzer offers extreme measurement sensitivity from parts-per-million (ppm) down to low parts-per-billion (ppb) levels, and negligible matrix effects from permanent gases. Combined with the separating power of gas ...