- Home
- Equipment
- usa alabama
- diffuse sampling
Refine by
Diffuse Sampling Equipment Supplied In Alabama
5 equipment items found
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
The MerPAS® sampler fitted with the yellow body diffusive barrier is best used for sampling outdoor ambient air with highly elevated mercury concentrations (50 ng/m3). This sampler has a thicker diffusive barrier, thereby reducing the effective sampling rate to lessen Hg capture by the device. The sampling ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
For indoor applications, the MerPAS sampler is deployed without the protective jar housing regardless of Hg air concentration since the sample does not need protection from the elements. Mounting stands may be purchased from Tekran if needed. Sample time is determined by monitoring goals and expected air Hg levels. The yellow body diffusive ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
The MerPAS sampler is small in size and is compatible with personal sampling. For this configuration, the yellow body diffusive barrier is used without any protective housing. The sampler is attached to a plastic plate and then attached to the lapel or shirt pocket to keep the device near the worker breathing zone. ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or sample-draw. In the diffusion mode, up to four RF-IR-ST-24 Refrigerant Sensor/ Transmitters can be daisy-chained to the Monitor and transmit data on an RS-485 ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
This state-of-the-art instrument measures Carbon Dioxide (CO2) concentrations in the parts per million (ppm) range and is ideal for applications ranging from conference rooms to cafeterias. The CO2-2000 is easy to install and support. Measurement output is via a 4 – 20mA current loop or a 0-10V interface. A completely isolated power supply eliminates any ground loop or electrical ...