The Canister Filling option allows the gas mixing/dilution system to fill a canister to a particular pressure. The system will stop automatically when the desired pressure is reached, and even allows the desired pressure to be changed while filling. For most systems, this option uses a mechanical pressure switch, which is adjusted to the desired ...

CONTACT SUPPLIER

Premium

KEG - Duce Nozzle

Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)

Tight water pattern for efficient cleaning and pulling. DUCE NOZZLE Tight water pattern for efficient cleaning and pulling ADVANTAGES Unique Vibrating ‘Jackhammer’ Action Replaceable ...

CONTACT SUPPLIER

Premium

KEG - Floor Cleaner Nozzle

Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)

ADVANTAGES: Self Righting Design. Fillable Weight Port for High Flow Conditions. Reduced Operating Costs. High Efficiency Cleaning. Superior Water Pattern ...

CONTACT SUPPLIER

Premium

IMKO - Model Sono-Vario Standard - Radar-Based Conductance Probe for Abrasive Materials

Manufactured by:IMKO Micromodultechnik GmbH based inEttlingen, GERMANY

SONO-VARIO Standard: For measuring abrasive and complex materials. SONO-VARIO Standard has several advantages: Ideally to measure abrasive materials like sand, gravel and other aggregates. Highly reliable when measuring complex materials like minerals, powders, granules, quartz sand, food and sludge. Thanks to TRIME technology it is unaffected by steam or changing particle sizes of sand and ...

CONTACT SUPPLIER

Premium

KEG - Sewer Flush Nozzle

Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)

KEG’s Sewer Flush Nozzle is a heavy duty cleaning nozzle that provides superior results while being more cost competitive. The power of the Sewer Flush’s 15 and 25 degree jet angles gives the operator high wall force with a wide water pattern necessary to clean large diameter pipes. The Sewer Flush Nozzle is available with replaceable steel or titanium ceramic inserts and is an ...

CONTACT SUPPLIER

Premium

KEG - Turbo & Micro Chain Cutter

Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)

Easily Configured for Multiple Jobs. Use in Sweeping 90 Degree or 45 Degree Elbows. Product Includes: Carrying Case, Tools and Owner’s Manual. Clean with Soap and ...

CONTACT SUPPLIER

Premium

Environics - Model ROBD - Simulator Accessory Package

Manufactured by:Environics, Inc. based inTolland, CONNECTICUT (USA)

The ROBD Simulator Accessory Package will simplify the set-up of the ROBD into your flight training/simulating program. The accessory package was designed to guarantee proper integration of all components with the ROBD2 or ROBD3 system (full list of included components below). Step by step instructions are provided for connecting the power, audio and video sources, for the SUT, the instructor ...

CONTACT SUPPLIER

Premium

IMKO - Model TRIME-ES - Concrete Moisture Monitoring System

Manufactured by:IMKO Micromodultechnik GmbH based inEttlingen, GERMANY

Traditional methods to measure concrete moisture are influenced by disturbances such as temperature and changing salinity. Also the long term stability of many sensors like humidity sensors is not guaranteed. In difference to those classical methods TRIME-TDR is characterized by a non-destructive, precise and long term stable measurement ...

CONTACT SUPPLIER

Premium

KEG - Twister Rebuild Kit

Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)

The Twister Nozzle is a great oscillating jet that removes grease, roots and clears blockages from pipes. The four rear jets propel the nozzle up the line while to forward oscillating jet goes to work clearing the blockage. After time and time again clearing blockages this heavy hitter could become worn down and the rebuild kit is all that is need to keep this knockout of a nozzle it working ...

CONTACT SUPPLIER

Premium

Environics - Model 4040 Series - Computerized Gas Dilution System

Manufactured by:Environics, Inc. based inTolland, CONNECTICUT (USA)

The Environics Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers. A low cost, computerized gas dilution system with an advanced Windows user interface, the 4040 now supports up to eight mass flow controllers, allowing a broader range of dilutions (up to ...

CONTACT SUPPLIER

Premium

IMKO - Model SONO-ES - Concrete Moisture Transducer Probe

Manufactured by:IMKO Micromodultechnik GmbH based inEttlingen, GERMANY

SONO-ES Concrete: T3/22 probe with TECANAT Installation tube and SONO-ES transducer. All traditional procedures to measure moisture in hardened concrete are strongly dependent on disturbance variables like temperature and volatile salinity. Long-term stability of many sensors like humidity sensors is also not guaranteed. In contrast to previous methods TRIME-TDR stands out by its non-destructive, ...

CONTACT SUPPLIER

Premium

IMKO SONO - Model M1 - Sand Gravel Mobile Moisture Probe

Manufactured by:IMKO Micromodultechnik GmbH based inEttlingen, GERMANY

Mobile moisture probe for sand, gravel, chippings and clay balls with integrated TDR electronics. Probe diameter 64 mm and uncoated rods with 130 mm rod ...

CONTACT SUPPLIER

Premium

Environics - Model 2 (ROBD2) - Reduced Oxygen Breathing Device

Manufactured by:Environics, Inc. based inTolland, CONNECTICUT (USA)

The Environics Series Reduced Oxygen Breathing Device 2 is the next generation system that simulates altitude exposure and can be utilized for both research and hypoxia ...

CONTACT SUPPLIER

Premium

KEG - Aluminium Skids with Holes

Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)

Skids are required for use on the Aluminum Traction, Cleaning, Torpedo, and Royal Nozzles, or the nozzle warranties will be voided. The aluminum skids with holes have a drag consistency, which is lighter, making it more maneuverable and easier to operate. Aluminum skids with holes use less flow and less ...

CONTACT SUPPLIER

Premium

KEG - Replaceable Inserts

Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)

The purpose of the inserts gives the ability to dial in the nozzle to the specific flow rate, and pressure rating needs to complete any jetting ...

CONTACT SUPPLIER

Premium

KEG - Model Aqua Power R2D2-1 - Mini Nozzle

Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)

The Aqua Power Mini Nozzle is an excellent grease removal nozzle that quickly cuts through grease while cleaning out pipes and saving time. The Aqua Power Mini Nozzle is an excellent all-around cleaning and grease removal nozzle for pipelines. The sleeve is included as a valuable tool when working in service laterals. The sleeve prolongs the life of the Aqua Power Mini by elevating the rotating ...

CONTACT SUPPLIER

Premium

Environics - Silicon Coated Plumbing

Manufactured by:Environics, Inc. based inTolland, CONNECTICUT (USA)

Silicon surface treatment of the gas path eliminates surface adsorption of active compounds like sulfurs, H2S, ammonia and mercury on stainless steel surfaces. Also know as Silcosteel®/Sulfinert® or SilcoNert 1000/2000, coating the gas path also improved efficiency, reduces moisture contamination and prolongs unit life. A coating is often used in combination with a heated flow path and/or ...

CONTACT SUPPLIER

Premium

Environics - Model Series 6113 - Ozone Transfer Standard with Photometer, Including External Ozone Monitoring

Manufactured by:Environics, Inc. based inTolland, CONNECTICUT (USA)

The Environics Series 6113 Ozone Transfer Standard with Photometer is the ideal system for those looking for a standard for ozone monitoring and reporting programs. A sister unit to the S6103, the S6113 focuses on automatically performs zero, precision, span and multi-point calibrations using ...

CONTACT SUPPLIER

Premium

KEG - Mini Chain Cutter

Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)

Easily Configured for Multiple Jobs. Use with .5”, .75” High Pressure Swivel. Product Includes: Carrying Case, .Mini Chain, Cutter, 75” HP Swivel, Leader Hose**, and Owner’s Manual. Clean with Soap and ...

CONTACT SUPPLIER

Need help finding the right suppliers?Try XPRT Sourcing. Let the XPRTs do the work for you