Refine by
Applications
- Wastewater Treatment System for Commercial
- Wastewater Treatment System for Community & Multi-Family
- Wastewater Treatment System for Small Municipal
- Wastewater Treatment System for Residential & Single-Family
- Indoor air sampling for industrial hygiene
- Regenerable Water Treatment System for Aviation
- Regenerable Water Treatment System for Industrial Wastewater Remediation
- Regenerable Water Treatment System for Federal - Military - Defense
- Regenerable Water Treatment System for Solid Waste Landfill
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Mineral Deposits
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Minerals
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Scaling
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Rust
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Grease
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Tuberculation
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Roots
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Concrete
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Leachate
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Protruding Taps
- Carbonisation for Upcycling
- Coal Feed for Naturally Healthy Animals
- Data integrity, regulatory compliance solutions for calibration sector
- Activated Carbon for Biochar – Natural Soil Improvement
- Data integrity, regulatory compliance solutions for clinical labs sector
- Nanobubble Generator Systems for Nanobubble Gas Transfer
- Nanobubble Generator Systems for Agricultural Soil & Water Use Improvements
- Nanobubble Generator Systems for Alternative Soil Nutrients
- FlowCam for Biopharma - Protein Aggregate Analysis in Therapeutics Development
- FlowCam for Biopharma - Cell Therapy Quality Control and Organoid Analysis
- FlowCam for Biopharma - AAV Aggregation Detection in Gene Therapies
- FlowCam for Aquatic - Water Quality Monitoring and Drinking Water Analysis
- FlowCam for Aquatic - Phytoplankton and Zooplankton Research
- FlowCam for Aquatic - Shellfish Hatcheries and Fish Farming Applications
- FlowCam for Aquatic - Microalgae Cultivation and Algae Technology
- FlowCam for Materials - Particle Analysis Simplifies Quality Control of Food & Beverage Products
- FlowCam for Materials - Environmental Monitoring and Research
- FlowCam for Materials - Materials - Advanced Materials, Fibers, and Polymer Characterization
- Biological filtration for municipal wastewater treatment industry
- Sludge dewatering for sludge management
- Ambient Air Monitoring
- Data integrity, regulatory compliance solutions for ELISAs sector
- Data integrity, regulatory compliance solutions for NGS and qPCR assays sector
- Data integrity, regulatory compliance solutions for liquid class sector
- Data integrity, regulatory compliance solutions for process optimization sector
- DDI Solutions for Grey Water Heat Recovery
- DDI Solutions for Laundry Heat Recovery
- DDI Solution for Recovering Energy from Municipal Sewage
- DDI Solutions for WWTP - Wastewater Treatment Plants
- Storm water flushing for sewage wastewater treatment
- Solids removal for sewage wastewater treatment
- Sewage sludge to phosphorus fertilizer
Xprt Equipment Supplied In Maine
1,766 equipment items found
Showcase
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The d-Rain Joint is a filter inserted into concrete expansion joints that allows rainwater and other runoff to filter into the native soil without pooling or contributing to excessive off-flows of ...
Showcase
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
ABC (Anoxic BioFilter Clarifiers) is a family of specialty clarifiers. Each of these devices are designed for use as a secondary clarification device after ...
Showcase
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
RetroFAST Septic System Enhancement is an advanced treatment unit that upgrades an under-performing septic system. The RetroFAST unit is made up of a white liner, several blue media blocks, an airlift device, and a remote blower (connected to the airlift via pipe). The blower is the only moving part for the system. The RetroFAST is a compactable unit inserted directly into the existing septic ...
Showcase
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
BioSTORM Stormwater Treatment System is a Stage II stormwater system that combines litter control screening with sediment separation. It is typically paired with the StormTEE as a means to prevent litter from entering the treatment ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The BioBarrier is a wastewater treatment system that uses a Membrane Bioreactor (MBR). This technology removes organic pollutants and suspended solids with the use of ultrafiltration membranes. The membrane system replaces the clarifier, sand filter, and disinfection processes used in many conventional wastewater treatment ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
Decentralized stormwater wastewater treatment systems offer low capital and operating costs, a wise approach for land and energy use, and a practical solution to reduce conventional pollutants, nutrients, and emerging ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Drill Point Quattro Nozzle is a terrific tool for removing total line blockages. The stainless steel drill tip penetrates the toughest clogs, particularly grease blockages. The three jets pre- drilled in the changeable tip then enlarge the opening in the clog, working with the sharp, tapered edges of the Drill Point Quattro. The loosened debris is then washed down the line by the propulsion ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The flow tube can become damaged, and a replacement may be necessary. The flow tube is used to test the gallons per minute (GPM) flow of jetter machines ranging from .5” - 1”. This will ensure optimal flow is used before beginning the pipe cleaning ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
KEG’s Rotor Nozzles are an excellent tool for complete pipe cleaning when removing the remnants of grease, roots, and scale before camera inspections. It should be noted, however, that a Rotor Nozzle is NOT a cleaning nozzle and should not be used in cleaning applications. Rotor Nozzles are intended to remove the grease and sludge that remain in lines after an 80 percent cleaning has been ...
Premium
Manufactured by:Yokogawa Fluid Imaging Technologies, Inc. based inScarborough, MAINE (USA)
The ALH for FlowCam Automated Liquid Handler integrates with FlowCam 8000 series instruments, FlowCam LO, and FlowCam Cyano to automate sample handling and FlowCam operation. ALH for FlowCam minimizes the risk of human error and improves measurement repeatability, ensures safer lab operation, and increases ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
6”- 48” pipe all in one cutter! ADVANTAGES: Stainless Steel Construction. High Speed, High Torque Water Driven Design. Easily Configured for Multiple Jobs. Roller Chain is Forgiving on Pipe Walls. Operates in Egg-Shaped Pipe*. Product Includes: Carrying Case, Tools and Owner’s Manual. Clean with Soap and ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Aqua Power Mini Nozzle is an excellent grease removal nozzle that quickly cuts through grease while cleaning out pipes and saving time. The Aqua Power Mini Nozzle is an excellent all-around cleaning and grease removal nozzle for pipelines. The sleeve is included as a valuable tool when working in service laterals. The sleeve prolongs the life of the Aqua Power Mini by elevating the rotating ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The FITT-ee product line was created with energy efficiency (“ee”) in mind. The FITT-ee systems operate on the same principles as the traditional FAST line, but with cost effective treatment, requiring less electrical ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The BioBarrier Graywater a treatment system specially designed to treat the Graywater in homes: water from sinks, dishwashers, showers, etc. The system uses a Membrane Bioreactor (MBR) that removes organic pollutants and suspended solids with the use of ultrafiltration membranes. Depending on local regulations, the treated water can be used to irrigate plants, wash outdoor surfaces, or flush ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The NitriFAST is an advanced wastewater treatment system that uses Fixed Activated Sludge Treatment (FAST) that provides additional nitrification of secondary effluent. A treatment tank containing the NitriFAST module receives wastewater from the secondary treatment system, such as the MyFAST, MicroFAST or HighStrengthFAST. Like its cousins in the FAST product line-up, the NitriFAST module ...
Premium
Manufactured by:Yokogawa Fluid Imaging Technologies, Inc. based inScarborough, MAINE (USA)
FlowCam Nano provides dynamic image analysis of submicron particles from 300 nm to 2 µm, bridging the gap between traditional flow imaging microscopy and other particle analysis techniques. Use FlowCam Nano for early detection of aggregates and contaminant monitoring for protein formulations, nano-drug delivery systems, characterization of bacteria, bioprocess monitoring, and materials ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
ADVANTAGES: Residential Friendly. Virtually Eliminates Blowing Toilets. Use with as Low as 50 GPM. Custom Tuned to Your Jetting Specifications. Replaceable Titanium Ceramic Inserts ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Hydro-X Hand Injector Nozzle provides the capability of water flow up to 25 GPM and up to 4000 PSI. Hand Injector’s single jet cuts through roots faster because of the water pressure through the jetted ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
Ball Nozzles are KEG’s Tier One Nozzles that come with factory drilled orifices. For small, residential applications, these nozzles are typically used. Ball Nozzles have a one year warranty. KEG’s Ball Nozzles are suitable for pipes from 1” to 8”. It is noted that in larger pipe the water impact will be reduced. The Ball Nozzle fits a .25”, .375” and .5” ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The StormTEE screen separates debris and litter carried by storm water runoff before the water enters the treatment system (such as BioSTORM Storm Water Treatment System), detention ponds, or storm ...