Refine by
Applications
- Wastewater Treatment System for Commercial
- Wastewater Treatment System for Community & Multi-Family
- Wastewater Treatment System for Small Municipal
- Wastewater Treatment System for Residential & Single-Family
- Indoor air sampling for industrial hygiene
- Regenerable Water Treatment System for Aviation
- Regenerable Water Treatment System for Industrial Wastewater Remediation
- Regenerable Water Treatment System for Federal - Military - Defense
- Regenerable Water Treatment System for Solid Waste Landfill
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Mineral Deposits
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Minerals
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Scaling
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Rust
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Grease
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Tuberculation
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Roots
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Concrete
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Leachate
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Protruding Taps
- Carbonisation for Upcycling
- Coal Feed for Naturally Healthy Animals
- Data integrity, regulatory compliance solutions for calibration sector
- Activated Carbon for Biochar – Natural Soil Improvement
- Data integrity, regulatory compliance solutions for clinical labs sector
- Nanobubble Generator Systems for Nanobubble Gas Transfer
- Nanobubble Generator Systems for Agricultural Soil & Water Use Improvements
- Nanobubble Generator Systems for Alternative Soil Nutrients
- FlowCam for Biopharma - Protein Aggregate Analysis in Therapeutics Development
- FlowCam for Biopharma - Cell Therapy Quality Control and Organoid Analysis
- FlowCam for Biopharma - AAV Aggregation Detection in Gene Therapies
- FlowCam for Aquatic - Water Quality Monitoring and Drinking Water Analysis
- FlowCam for Aquatic - Phytoplankton and Zooplankton Research
- FlowCam for Aquatic - Shellfish Hatcheries and Fish Farming Applications
- FlowCam for Aquatic - Microalgae Cultivation and Algae Technology
- FlowCam for Materials - Particle Analysis Simplifies Quality Control of Food & Beverage Products
- FlowCam for Materials - Environmental Monitoring and Research
- FlowCam for Materials - Materials - Advanced Materials, Fibers, and Polymer Characterization
- Biological filtration for municipal wastewater treatment industry
- Sludge dewatering for sludge management
- Ambient Air Monitoring
- Data integrity, regulatory compliance solutions for ELISAs sector
- Data integrity, regulatory compliance solutions for NGS and qPCR assays sector
- Data integrity, regulatory compliance solutions for liquid class sector
- Data integrity, regulatory compliance solutions for process optimization sector
- DDI Solutions for Grey Water Heat Recovery
- DDI Solutions for Laundry Heat Recovery
- DDI Solution for Recovering Energy from Municipal Sewage
- DDI Solutions for WWTP - Wastewater Treatment Plants
- Storm water flushing for sewage wastewater treatment
- Solids removal for sewage wastewater treatment
- Sewage sludge to phosphorus fertilizer
Xprt Equipment Supplied In Maine
1,764 equipment items found
Showcase
Manufactured by:Yokogawa Fluid Imaging Technologies, Inc. based inScarborough, MAINE (USA)
FlowCam Cyano provides an innovative solution for freshwater research and monitoring of drinking water reservoirs and recreational water bodies. A high-throughput, automated alternative to manual microscopy, FlowCam Cyano automatically differentiates between fluorescence-emitting Cyanobacteria and other algae while enabling the early detection of harmful algal ...
Showcase
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
ABC (Anoxic BioFilter Clarifiers) is a family of specialty clarifiers. Each of these devices are designed for use as a secondary clarification device after ...
Showcase
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The MicroFAST system is an advanced wastewater treatment system that uses Fixed Activated Sludge Treatment (FAST) to break down organic material and nutrients in wastewater. A treatment tank containing the MicroFAST module receives wastewater from the facility and is typically placed after a primary settling tank or septic tank. The MicroFAST module contains blocks of fixed media and a patented ...
Premium
Manufactured by:Yokogawa Fluid Imaging Technologies, Inc. based inScarborough, MAINE (USA)
Extend your particle imaging capabilities from 300 µm to 5 mm with FlowCam Macro for aquatic and environmental research and materials characterization. Obtain detailed morphological data along with accurate counting and sizing measurements to enable differentiation of diverse zooplankton species and particle ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
BioSTEP is a screened pumping system that places a submersible pump into a SaniTEE® screen to transfer effluent. The system features a ScumGuard® Protector to prevent floating scum from entering the ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
Adjustable Turbo Cutter is a high-speed medium torque chain cutter with predetermined lockable setup for metric pipe sizes 150,200,225,250,300 mm and US inch pipe sizes, 6,8,9,10,and 12 ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
KEG’s Sewer Flush Nozzle is a heavy duty cleaning nozzle that provides superior results while being more cost competitive. The power of the Sewer Flush’s 15 and 25 degree jet angles gives the operator high wall force with a wide water pattern necessary to clean large diameter pipes. The Sewer Flush Nozzle is available with replaceable steel or titanium ceramic inserts and is an ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
KEG’s Rotor Nozzles are an excellent tool for complete pipe cleaning when removing the remnants of grease, roots, and scale before camera inspections. It should be noted, however, that a Rotor Nozzle is NOT a cleaning nozzle and should not be used in cleaning applications. Rotor Nozzles are intended to remove the grease and sludge that remain in lines after an 80 percent cleaning has been ...
Premium
Manufactured by:Yokogawa Fluid Imaging Technologies, Inc. based inScarborough, MAINE (USA)
Experience rapid high-resolution imaging, data acquisition, and analysis of microparticles. FlowCam 5000 flow imaging instrument is an economical, high-value solution for monitoring particles in the 3 µm to 300 µm size range for research, educational, and commercial ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
Replaceable Titanium Ceramic Inserts. More Efficient Than Cutting and Milling. This nozzle is designed to jet with the flow from the top of the hill ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
BioSTORM Stormwater Treatment System is a Stage II stormwater system that combines litter control screening with sediment separation. It is typically paired with the StormTEE as a means to prevent litter from entering the treatment ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The BioBarrier Graywater a treatment system specially designed to treat the Graywater in homes: water from sinks, dishwashers, showers, etc. The system uses a Membrane Bioreactor (MBR) that removes organic pollutants and suspended solids with the use of ultrafiltration membranes. Depending on local regulations, the treated water can be used to irrigate plants, wash outdoor surfaces, or flush ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
Virtually eliminates blowing toilets with 12 forward jets that equalize air pressure in the ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The d-Rain Joint is a filter inserted into concrete expansion joints that allows rainwater and other runoff to filter into the native soil without pooling or contributing to excessive off-flows of ...
Premium
Manufactured by:Yokogawa Fluid Imaging Technologies, Inc. based inScarborough, MAINE (USA)
Through its exceptional image quality and the widest size range available, FlowCam 8000 is a particle size and shape analyzer using state-of-the-art particle imaging technology. Analyze thousands of particles in less than a minute and comprehensively characterize the size, count, morphology, and identity of organisms and particulates in water samples or native ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
This Egg Nozzle is an upgrade from the Standard Nozzle. Instead of drilled jets, it comes with replaceable inserts available in either steel or titanium ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Twister Nozzle is an oscillating jet perfect for removing grease and roots or clearing blockages from a pipe. The four rear jets propel this nozzle up the line while the oscillating forward jet cuts through grease and roots clearing blockages. This nozzle is solely designed to clear blockages in a time-efficient manner. This nozzle offers longevity as there are replacement parts available. ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
Standard Nozzles are KEG’s Tier One Nozzles that come with factory drilled orifices. For small, residential applications, these nozzles are typically used. Standard Nozzles have a one year warranty. Standard Nozzles fit .25” to 1.25” hoses and will work effectively in 2” to 12” ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Drill Point Quattro Nozzle is a terrific tool for removing total line blockages. The stainless steel drill tip penetrates the toughest clogs, particularly grease blockages. The three jets pre- drilled in the changeable tip then enlarge the opening in the clog, working with the sharp, tapered edges of the Drill Point Quattro. The loosened debris is then washed down the line by the propulsion ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Traction Nozzle is an excellent multi-purpose nozzle. When an extremely tight water pattern is needed for intense directed cleaning and propulsion; few nozzles perform as well as KEG’s Traction Nozzle. With 8° and 12° angled jets, the Traction Nozzle will provide tremen- dous thrust and highly efficient cleaning using KEG’s Fluid ...