Refine by
Applications
- Wastewater Treatment System for Commercial
- Wastewater Treatment System for Community & Multi-Family
- Wastewater Treatment System for Small Municipal
- Wastewater Treatment System for Residential & Single-Family
- Indoor air sampling for industrial hygiene
- Regenerable Water Treatment System for Aviation
- Regenerable Water Treatment System for Industrial Wastewater Remediation
- Regenerable Water Treatment System for Federal - Military - Defense
- Regenerable Water Treatment System for Solid Waste Landfill
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Mineral Deposits
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Minerals
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Scaling
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Rust
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Grease
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Tuberculation
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Roots
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Concrete
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Leachate
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Protruding Taps
- Carbonisation for Upcycling
- Coal Feed for Naturally Healthy Animals
- Data integrity, regulatory compliance solutions for calibration sector
- Activated Carbon for Biochar – Natural Soil Improvement
- Data integrity, regulatory compliance solutions for clinical labs sector
- Nanobubble Generator Systems for Nanobubble Gas Transfer
- Nanobubble Generator Systems for Agricultural Soil & Water Use Improvements
- Nanobubble Generator Systems for Alternative Soil Nutrients
- FlowCam for Biopharma - Protein Aggregate Analysis in Therapeutics Development
- FlowCam for Biopharma - Cell Therapy Quality Control and Organoid Analysis
- FlowCam for Biopharma - AAV Aggregation Detection in Gene Therapies
- FlowCam for Aquatic - Water Quality Monitoring and Drinking Water Analysis
- FlowCam for Aquatic - Phytoplankton and Zooplankton Research
- FlowCam for Aquatic - Shellfish Hatcheries and Fish Farming Applications
- FlowCam for Aquatic - Microalgae Cultivation and Algae Technology
- FlowCam for Materials - Particle Analysis Simplifies Quality Control of Food & Beverage Products
- FlowCam for Materials - Environmental Monitoring and Research
- FlowCam for Materials - Materials - Advanced Materials, Fibers, and Polymer Characterization
- Biological filtration for municipal wastewater treatment industry
- Sludge dewatering for sludge management
- Ambient Air Monitoring
- Data integrity, regulatory compliance solutions for ELISAs sector
- Data integrity, regulatory compliance solutions for NGS and qPCR assays sector
- Data integrity, regulatory compliance solutions for liquid class sector
- Data integrity, regulatory compliance solutions for process optimization sector
- DDI Solutions for Grey Water Heat Recovery
- DDI Solutions for Laundry Heat Recovery
- DDI Solution for Recovering Energy from Municipal Sewage
- DDI Solutions for WWTP - Wastewater Treatment Plants
- Storm water flushing for sewage wastewater treatment
- Solids removal for sewage wastewater treatment
- Sewage sludge to phosphorus fertilizer
Xprt Equipment Supplied In Maine
1,764 equipment items found
Showcase
Manufactured by:Yokogawa Fluid Imaging Technologies, Inc. based inScarborough, MAINE (USA)
FlowCam Cyano provides an innovative solution for freshwater research and monitoring of drinking water reservoirs and recreational water bodies. A high-throughput, automated alternative to manual microscopy, FlowCam Cyano automatically differentiates between fluorescence-emitting Cyanobacteria and other algae while enabling the early detection of harmful algal ...
Showcase
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The BioBarrier is a wastewater treatment system that uses a Membrane Bioreactor (MBR). This technology removes organic pollutants and suspended solids with the use of ultrafiltration membranes. The membrane system replaces the clarifier, sand filter, and disinfection processes used in many conventional wastewater treatment ...
Showcase
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The MicroFAST system is an advanced wastewater treatment system that uses Fixed Activated Sludge Treatment (FAST) to break down organic material and nutrients in wastewater. A treatment tank containing the MicroFAST module receives wastewater from the facility and is typically placed after a primary settling tank or septic tank. The MicroFAST module contains blocks of fixed media and a patented ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The RollsAIR Extended Aeration Wastewater Treatment System is a suspended growth system designed to handle 200,000 – 2,000,000 GPD flows of residential or commercial wastewater. The pre-engineered system combines the LIXOR® Submerged Aeration Devices with BioMicrobics’ patented screening devices, MyTEE and SaniTEE for a robust, relatively low-cost approach to small community ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The StormTEE screen separates debris and litter carried by storm water runoff before the water enters the treatment system (such as BioSTORM Storm Water Treatment System), detention ponds, or storm ...
Premium
Manufactured by:Yokogawa Fluid Imaging Technologies, Inc. based inScarborough, MAINE (USA)
Through its exceptional image quality and the widest size range available, FlowCam 8000 is a particle size and shape analyzer using state-of-the-art particle imaging technology. Analyze thousands of particles in less than a minute and comprehensively characterize the size, count, morphology, and identity of organisms and particulates in water samples or native ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
The BioBarrier HSMBR is a high strength wastewater treatment system that uses a Membrane Bioreactor (MBR). This technology removes organic pollutants and suspended solids with the use of ultrafiltration membranes. The system is specially designed to treat wastewater with higher organic and nutrient loads produced in commercial applications, and for larger flow rates (>1500 GPD) including ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
ADVANTAGES: Residential Friendly. Virtually Eliminates Blowing Toilets. Use with as Low as 50 GPM. Custom Tuned to Your Jetting Specifications. Replaceable Titanium Ceramic Inserts ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Forward Jet Nozzle has six factory drilled forward inserts with one center forward interchangeable insert and zero rear inserts. This nozzle is only available in .5” connections. The Forward Jet Nozzle propels water through the forward nozzle and breaks up the clog or pipe obstruction, washing away the debris from the residence. The Forward Jet Nozzle is available in 16 GPM, 18 GPM, and ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The purpose of the inserts gives the ability to dial in the nozzle to the specific flow rate, and pressure rating needs to complete any jetting ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Royal Nozzle, because of its wider angles, is more diverse, because it allows more penetrating power to clean pipes better than other nozzles. With 12 alternating jets at 22° and 32°, the Royal Nozzle is designed for all-around cleaning of pipes up to 48” in diameter. The sheer weight of the Royal Nozzle keeps it on the bottom of the pipe for effective cleaning when other ...
Premium
Manufactured by:Yokogawa Fluid Imaging Technologies, Inc. based inScarborough, MAINE (USA)
Innovative particle characterization with FlowCam LO combines flow imaging microscopy (FIM) and light obscuration (LO) into a single analytical solution. Beyond the compendial light obscuration method to fulfill USP and requirements, flow imaging microscopy provides an orthogonal method for quality control of subvisible particulate ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Drill Point Quattro Nozzle is a terrific tool for removing total line blockages. The stainless steel drill tip penetrates the toughest clogs, particularly grease blockages. The three jets pre- drilled in the changeable tip then enlarge the opening in the clog, working with the sharp, tapered edges of the Drill Point Quattro. The loosened debris is then washed down the line by the propulsion ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The flow tube can become damaged, and a replacement may be necessary. The flow tube is used to test the gallons per minute (GPM) flow of jetter machines ranging from .5” - 1”. This will ensure optimal flow is used before beginning the pipe cleaning ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Egg Devastator Nozzle is the perfect combination of the four forward jets and rounded body design makes this an ideal nozzle for total blockage removal in piping with many angles. ...
Premium
Manufactured by:Yokogawa Fluid Imaging Technologies, Inc. based inScarborough, MAINE (USA)
Extend your particle imaging capabilities from 300 µm to 5 mm with FlowCam Macro for aquatic and environmental research and materials characterization. Obtain detailed morphological data along with accurate counting and sizing measurements to enable differentiation of diverse zooplankton species and particle ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
Expansion kits are additional products that attach to a nozzle for larger pipe applications. Each piping system needs are different in size, tools, and solutions. We have the means to achieve the solution you need! Take a look at our expansion kit options below for your piping needs. If you have questions, contact your sales representative or call our office for answers. We are here to provide ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Stallion Nozzle is a Tier Three Fluid Mechanics medium-sized nozzle excellent for storm drain or sewer cleaning applications where pipes are heavily exposed to debris, or where pipes are heavily damaged or weakened. The Stallion is a fantastic flushing nozzle, however, due to the angle of the jets, the Stallion should not be used to clean large pipe walls. The Stallion Nozzle is ideal for ...
Premium
Manufactured by:BioMicrobics, Inc based inLenexa, KANSAS (USA)
MyFAST is a larger FAST system that is engineered for the needs of onsite wastewater treatment with flows in the 10,000 to 160,000 GPD. This advanced wastewater treatment system uses Fixed Activated Sludge Treatment (FAST) to break down organic material and nutrients in wastewater. ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
Channel Cleaner is KEG’s latest product innovation: our channel cleaners specially designed for efficient and trouble-free cleaning of channels from 90 - 200 mm in ...