- Home
- Equipment
- usa massachusetts
- diffuse sampling
Refine by
Diffuse Sampling Equipment Supplied In Massachusetts
69 equipment items found
Manufactured by:Markes based inBridgend, UNITED KINGDOM
Diffusion caps are used to define the air gap between the sampling environment and sorbent surface during diffusive sampling (also known as axial or passive sampling). Used in combination with a single-bed sorbent tube, penclip and aluminium long-term storage cap (at the other end of the tube), ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or sample-draw. In the diffusion mode, up to four RF-IR-ST-24 Refrigerant Sensor/ Transmitters can be daisy-chained to the Monitor and transmit data on an RS-485 ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
This state-of-the-art instrument measures Carbon Dioxide (CO2) concentrations in the parts per million (ppm) range and is ideal for applications ranging from conference rooms to cafeterias. The CO2-2000 is easy to install and support. Measurement output is via a 4 – 20mA current loop or a 0-10V interface. A completely isolated power supply eliminates any ground loop or electrical ...
Manufactured by:Bruker Corporation based inBillerica, MASSACHUSETTS (USA)
The ALPHA II is a compact FT-IR spectrometer with a footprint the size of a laptop. It is used for chemical analysis and enables you to do quality control, quantifications and verification of raw ...
Manufactured by:Durridge Company, Inc. based inBillerica, MASSACHUSETTS (USA)
The RAD7 radon monitor works most effectively when the incoming air sample has a low relative humidity. The DURRIDGE DRYSTIK Model ADS-3 transfers moisture from the incoming air to the air being pumped out of the RAD7. As the air enters a drying unit (not included) on its way to the RAD7, it will have already lost most of its moisture, greatly extending the life of the desiccant in the drying ...
Manufactured by:Edgetech Instruments, Inc. based inHudson, MASSACHUSETTS (USA)
The PPM1 Trace Moisture Analyzer is a compact, high-accuracy system engineered for measuring parts-per-million (ppm) moisture in gases. Built around an electrolytic phosphorus pentoxide sensor, the PPM1 applies Faraday’s Law of Electrolysis to directly determine water vapor content in gas streams. With a NEMA 4 (IP66/67) enclosure, the PPM1 is ideal for harsh industrial environments and ...
Manufactured by:Advanced Micro Instruments, Inc. (AMI) based inCosta Mesa, CALIFORNIA (USA)
This unique high pressure, non-diffusive sample gas tubing is outfitted with special connection fittings. Designed with an o-ring/swage seal and requiring only finger tightening, the tubing and fittings are rated up to 6,500psig. It continues to provide a leak tight seal even after thousands of connections without causing damage to the female portion of the ...
Manufactured by:Agilent Technologies, Inc. based inSanta Clara, CALIFORNIA (USA)
The revolutionary Agilent Cary 7000 Universal Measurement Spectrophotometer (UMS) will satisfy all your solid sampling needs. Collect hundreds of UV-Vis-NIR spectra overnight, or characterize optical components or thin films in minutes to hours rather than hours to days. Delivering a turn-key solution for research, development and QA/QC in optics, thin films/coatings, solar and glass, the Cary ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
6mm ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
6mm ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
6mm ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
6mm ID-includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
ACTI-VOC is a robust low-flow pump for sampling vapour-phase organic compounds (VOCs) onto sorbent tubes for subsequent analysis by thermal desorption (TD). Being lightweight, easy-to-use and intrinsically safe, ACTI-VOC is ideal for personal monitoring and a wide range of other air and gas sampling ...
Manufactured by:Advanced Micro Instruments, Inc. (AMI) based inCosta Mesa, CALIFORNIA (USA)
The Model 221R has become the standard oxygen deficiency monitor throughout the US market. It is used by the thousands in government labs, universities, and industry, anywhere there is a possibility of asphyxiation due to leakage of compressed or liquefied inert gases like nitrogen, argon or carbon ...