- Home
- Equipment
- usa minnesota
- diffuse sampling
Refine by
Applications
- Gas detection for building ventilation control
- Innovative gas measurement solutions for laboratory research industry
- Gas safety and process control for gas/oil/coal-fired power generation and refineries
- Process analyzers & instruments for NOx reduction
- Process analyzers & instruments for continuous emissions monitoring (CEM)
- Process analyzers & instruments for combustion efficiency and fuel air ratio
- Process analyzers & instruments for oxygen measurement
Diffuse Sampling Equipment Supplied In Minnesota
8 equipment items found
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
This state-of-the-art instrument measures Carbon Dioxide (CO2) concentrations in the parts per million (ppm) range and is ideal for applications ranging from conference rooms to cafeterias. The CO2-2000 is easy to install and support. Measurement output is via a 4 – 20mA current loop or a 0-10V interface. A completely isolated power supply eliminates any ground loop or electrical ...
Manufactured by:Sensor Electronics Corporation (SEC) based inSavage, MINNESOTA (USA)
The SEC Millenium Infrared Hydrocarbon Gas Detector is a complete self contained optical hydrocarbon gas detector. The sensing and reference elements are self-compensating for optical integrity and other signal inhibitors. ...
Manufactured by:Sensor Electronics Corporation (SEC) based inSavage, MINNESOTA (USA)
The SEC 3000 gas detector is a unique design combining intrinsically safe and explosion proof approved standards. This toxic gas detector allows for quick and simple field installation of a calibrated sensor module into the gas detector in hazardous locations with power applied. ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
It can monitor over a range of 0-1000ppm with a resolution threshold as low as 1ppm. The QuadSet can monitor up to four locations in one of two modes of operation, diffusion or sample-draw. In the diffusion mode, up to four RF-IR-ST-24 Refrigerant Sensor/ Transmitters can be daisy-chained to the Monitor and transmit data on an RS-485 ...
Manufactured by:Advanced Micro Instruments, Inc. (AMI) based inCosta Mesa, CALIFORNIA (USA)
This unique high pressure, non-diffusive sample gas tubing is outfitted with special connection fittings. Designed with an o-ring/swage seal and requiring only finger tightening, the tubing and fittings are rated up to 6,500psig. It continues to provide a leak tight seal even after thousands of connections without causing damage to the female portion of the ...
Manufactured by:Topas GmbH based inDresden, GERMANY
The Diffusion Dryer DDU 570 has been developed mainly as additional equipment for the Aerosol Generators produced by Topas GmbH. The diffusion dryer consists of an Acryl tube with 2 caps on its ends and tube connectors. In the operation status the dryer is filled with Silica gel. The aerosol to be dried is streaming through 3 screen pipes which are surrounded by Silica Gel (with indicator) ...
Manufactured by:Advanced Micro Instruments, Inc. (AMI) based inCosta Mesa, CALIFORNIA (USA)
The Model 221R has become the standard oxygen deficiency monitor throughout the US market. It is used by the thousands in government labs, universities, and industry, anywhere there is a possibility of asphyxiation due to leakage of compressed or liquefied inert gases like nitrogen, argon or carbon ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
WDG-HPII Series analyzers offer unique chimney-effect/convective sampling technology that combines the advantages of insitu probe high-particulate sampling with the high temperature and corrosion resistance of extractive analyzers. With a high-particulate filter and weatherproof sensor enclosure, the analyzer is ideal for measurements of O2, combustibles and methane, and is completely field ...