Refine by
Applications
- Environmental monitoring solutions for the site remediation industry
- Environmental monitoring solutions for the department of defense and department of energy (DOD-DOE) industry
- Environmental monitoring solutions for the industrial sites industry
- Environmental monitoring solutions for the groundwater sampling
- Environmental monitoring solutions for the oil refineries & petrochemical industry
- Environmental monitoring solutions for the landfill leachate and condensate pumping
- Environmental monitoring solutions for the landfill industry
- Environmental monitoring solutions for the mining sites industry
- Automated Sump Level Management System for Automotive
- Automated Sump Level Management System for Manufacturing
- Automated Sump Level Management System for Aerospace & Defense
- Automated Sump Level Management System for Biotech
- Automated Sump Level Management System for Agriculture
- Automated Sump Level Management System for Energy & Utilities
- Control Devices for Reducing Flow to a Filter System Application
- Control Devices for Constant Sump Flushing Application
- Environmental monitoring solutions for the groundwater remediation pumping
- Process heating for commercial and industrial functions
Pump Controller Equipment Supplied In Ohio
180 equipment items found
Manufactured by:DistaView Corporation based inBowling Green, OHIO (USA)
Single pump controller available in make-up or sump version. Has differential make-up or sump range, along with high and low alarm circuits. LiquaVision accepts all types of 4-20 mA sensors, such as pressure, ultrasonic, submersible and back pressure from bubbler systems. ...
Manufactured by:DistaView Corporation based inBowling Green, OHIO (USA)
Dual pump controller for lead & lag operations. Available in make-up or sump versions for lift stations and water towers. Two differential ranges controlled, along with high/low alarms. TwoView provides, at a glance, the actual level and high/low alarms in an easy to understand vertical bar display. Patented control features ...
Manufactured by:Nordson EFD based inWestlake, OHIO (USA)
High-resolution touchscreen programming of 797PCP-2K Series progressive cavity pumps provides intuitive adjustment of meter mix dispensing ...
Manufactured by:Control Interface, Inc. based inFairfield, OHIO (USA)
The A Grade vaultless lift station is the perfect solution for many pump station applications. All controls and piping are located above ground in a streamlined fiberglass housing mounted directly to a reinforced aluminum access hatch. Completely pre-assembled, you just mount the entire unit to the top of the pit, connect piping with provided couplings and wire ...
Manufactured by:Control Interface, Inc. based inFairfield, OHIO (USA)
The "E Series" pump control panel is a no frills panel satisfying small pump applications. It"s built with quality components but without the extremely rugged parts required for certain applications. This keeps the "E Series" within reach of almost any budget. ...
Manufactured by:Control Interface, Inc. based inFairfield, OHIO (USA)
The "N Series" pump control panel is at the benchmark of the industry. Years of testing and field operation have resulted in the development of our current model. All component parts have been chosen for their durability and exceptional performance in a variety of high stress applications. Our experienced designers and engineers are able to focus on your needs ...
Manufactured by:Blue Ribbon Corp. based inGrand Island, NEW YORK (USA)
Model BD100 Set Point Pump Controller (Bulldog) from Blue Ribbon Corp is designed exclusively for use with the Blue Ribbon Birdcage® level sensor providing basic pump control functions. The BD100 controller is an easy and inexpensive solution for monitoring and controlling ...
Manufactured by:Control Interface, Inc. based inFairfield, OHIO (USA)
The "I Series" pump control panel is for the customer who wants a high quality product but does not require components manufactured for extreme conditions. These panels use parts that surpass IEC regulations and can stand up to most applications. They provide high quality and peace of mind without using precious amounts of your budget. ...
Manufactured by:Blue Ribbon Corp. based inGrand Island, NEW YORK (USA)
Model BD200 Dual Set Point Pump Controller is versatile, simple, and inexpensive, making it the ideal instrument for controlling dual pump lifting stations. Setpoints for ON/OFF and HI/LO alarms are easily set on the front panel. These same buttons also Enable/Disable pump alternation. A selectable time delay of ...
Manufactured by:Septic Products Inc. (SPI) based inAshland, OHIO (USA)
Available in 120/208/240VAC-1PH models. 4X rated durable, weather-resistant enclosure with mounting feet. Circuit breakers for pump, compressor, and alarm circuits. Easy-to-access terminal block, timer operation (24-hr). Full HWA alarm circuit (visual and audible ...
Manufactured by:Automation Products Group, Inc. (APG) based inLogan, UTAH (USA)
The DCR-1006A controller works together with our MNU or DST ultrasonic sensors as well as the MPX level probe to allow simple level monitoring and control without the need of a more advanced system. This system performs reliably to meet your application needs today. With several sensors to choose from, and a variety of mounts, ranges, and outputs, there are plenty of options for your application ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The SPC pump control panel provides the interface between the pump motor starter and the Singer pump control valve. The SPC ensures that the pump starts and stops without causing line ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The Model 464 Electronic Control Unit is available in 125 psi or 250 psi versions, and uses 4 AA alkaline batteries that last up to 100 hours of normal use. These Controllers can also be operated manually, using only a compressed gas ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-BPC and 206-BPC booster pump control valves are installed in-line, directly downstream of the pump discharge. The pump control valve is normally closed and on pump start-up, a pilot solenoid is energized to open the valve, at a rate governed by the opening speed control. ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PG-BPC or 206-PG-BPC booster pump control valve is installed in-line directly downstream of the pump discharge. The valve is normally closed, and, on pump start-up, a pilot solenoid is energized to slowly open the valve, at a rate governed by the opening speed control. ...
Manufactured by:Automation Products Group, Inc. (APG) based inLogan, UTAH (USA)
The DST series ultrasonic sensors are designed to be used in conjunction with a DCR controller to give you a simplified, stand-alone system. The transmit and receive circuit is built into the sensor and digitally communicates the detected distance to the DCR controller. This allows the sensor to be separated from the DCR controller by up to 2000 feet with no signal loss. With several sensors to ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-DW and 206-DW deep well pump control valves are installed in a tee between the pump discharge and the check valve. The valve is normally open, and, on pump start-up, a pilot solenoid is energized to start closing the valve at a rate governed by the closing speed ...
Manufactured by:QED Environmental Systems, Inc based inDexter, MICHIGAN (USA)
Genie skimmers are safe, reliable and complete systems for removing floating LNAPL layers from wells. The SPG and SOS Programmable Genie skimmers are air-operated selective LNAPL removal systems with a high suction pump and a floating inlet designed to follow the LNAPL layer as the ground water level fluctuates. The SPG version uses a specific gravity float and the SOS version uses a hydrophobic ...
Manufactured by:QED Environmental Systems, Inc based inDexter, MICHIGAN (USA)
Genie skimmers are safe, reliable and complete systems for removing floating LNAPL layers from wells. The SPG and SOS AutoGenie Genie skimmers are air-operated selective LNAPL removal systems with a high suction pump and a floating inlet designed to follow the LNAPL layer as the ground water level fluctuates. The SPG version uses a specific gravity float and the SOS version uses a hydrophobic ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-HC and 206-HC hydraulic check valves are based on the 106-PG or 206-PG main valve. The valve functions as a two position valve - either fully open or fully closed. The HC allows one way flow only. Under normal forward flow, the valve opens as the higher inlet pressure lifts the inner valve assembly and the fluid in the upper chamber is discharged to the lower pressure, downstream side of ...