- Home
- Equipment
- usa pennsylvania
- sample processing
Show results for
Refine by
Applications
- Process analyzers & instruments for trace carbon monoxide
- Process analyzers & instruments for trace carbon dioxide
- Process analyzers & instruments for trace hydrogen
- Process analyzers & instruments for trace methane
- Process analyzers & instruments for thin film/semiconductor/PVD
- Water treatment solutions for cooling water treatment
- Water treatment solutions for utility water treatment
- Process analyzers & instruments for CO emissions
- Process analyzers & instruments for atmospheric sampling reactive gases and CVD
- Gas detection analyzers solutions for oil & gas industry
- Gas detection analyzers solutions for chemical & pharmaceutical processes industry
- Gas detection analyzers solutions for solvent based printing industry
- Solutions for waste water treatment
- Water treatment solutions for swimming pool water treatment
- Process analyzers & instruments for sulfur recovery tail gas
- Process analyzers & instruments for sulfur pit gas
Sample Processing Equipment Supplied In Pennsylvania
72 equipment items found
Manufactured by:Fujirebio based inMalvern, PENNSYLVANIA (USA)
Auto-LIA 48 offers fully automated processing for the complete range of INNO-LIA tests from sample incubation to color development, ensuring ease, speed, and confidence. Walk-away processing of INNO-LIA strips manufactured by Tecan and distributed by Fujirebio Europe. CE ...
Manufactured by:Endecotts Ltd based inLondon, UNITED KINGDOM
Endecotts hand held sample dividers will subdivide material samples into two smaller portions by a single pass.Further subdivisions can be attained by multiple passes.Each subdivision created with an Endecotts sample divider retains the characteristics of the original sample. Two different sample divider versions are available: One with 1/2" slot width and one with 1/4" slot ...
Manufactured by:Endecotts Ltd based inLondon, UNITED KINGDOM
The Consistometer is a low cost, durable, instrument for accurately checking laboratory or production samples against consistency, viscosity or flow rate standards.It uses little bench space and is yet probably the simplest, most accurate method of conducting a variety of flow associated tests. It is already widely used in the chemical, paint, cosmetic and food ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
CyBio TipTrays are designed, manufactured and quality inspected with respect to automation requirements, in turn permitting unattended, precise and highly reproducible sample ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
CyBio Tip Magazines 1536 are designed, manufactured and quality inspected with respect to automation requirements in 1536-well formats, in turn permitting unattended, precise and highly reproducible sample ...
Manufactured by:Drucker Diagnostics based inPort Matilda, PENNSYLVANIA (USA)
Powered by a vehicle’s 12V electrical supply, the 642M is designed to provide the ideal pre-analytic horizontal-sample-processing recommended by all blood collection tube manufacturers. Using patented technologies, the 642M reduces blood separation times by 33%, leaving more time to travel to the next appointment and less time waiting for completion of the ...
Manufactured by:Drucker Diagnostics based inPort Matilda, PENNSYLVANIA (USA)
The Model 642E is a compact single-speed centrifuge designed to provide the ideal pre-analytic sample processing performance recommended by all collection tube manufacturers. Using patented rotor technology, the 642E reduces blood separation processing times by 33% while minimizing use of valuable counter space for the doctor’s ...
Manufactured by:SUEZ Water Technologies and Solutions based inTrevose, PENNSYLVANIA (USA)
The Sentinel team was challenged by the pharmaceutical industry to develop an interface to existing portable / handheld endotoxin testing systems. The online solution automates depyrogenation, sample capture and dispensing, loading, unloading, and scheduling of testing events. A virtually unlimited number of sampling events can be scheduled. OES may be packaged ...
Manufactured by:QATM - part of Verder Scientific based inGolling, AUSTRIA
The OPAL 410 is a fully hydraulic, water-cooled hot mounting press for mounting samples before polishing. The process sequence is executed automatically. Mould assemblies can be exchanged quickly and without tools. The robust aluminum construction is powder coasted. With its solid construction and QATM hydraulic system, the operating noise of the hot mounting ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Cross Beater Mill SK 300 is suitable for coarse and fine size reduction, either in batches or continuously. It can process medium-hard and brittle materials and is easy to operate. For increased sample discharge and for processing heat-sensitive samples, an optionally available cyclone unit unit can be used instead of the ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The knife mill GRINDOMIX GM 200 is the ideal instrument for grinding and homogenizing foods and feeds. With two sharp, robust blades and a powerful 1000 W motor, it allows to process sample volumes up to 0.7 liters quickly and effectively. The GM 200 is not only ideal for homogenizing substances with a high water, oil or fat content but is also perfectly suited ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Rotor Beater Mill SR 300 is suitable for coarse and fine size reduction. It can process dry, soft, medium-hard, organic and inorganic substances. For increased sample discharge and for processing heat-sensitive samples, an optionally available cyclone unit can be used instead of the gravity ...
Manufactured by:Meeco Inc based inWarrington, PENNSYLVANIA (USA)
The Accupoint LP2 is a microprocessor-based low pressure (5-100 psig) moisture transmitter. Whether checking moisture in bulk gas trailers prior to filling or measuring a sample stream after the process pressure reduction, the Accupoint LP2 delivers reliable moisture ...
Manufactured by:CDS Analytical based inOxford, PENNSYLVANIA (USA)
The Drop-In-Sample-Chamber (DISC) is a novel accessory module for the 6000 series Pyroprobes. It transforms the horizontal sample loading probe used in traditional manual pyrolysis system to a convenient vertical loading system. The DISC saves your precious time by reducing the sample tube loading process. When used with the ...
by:Thermo Fisher Scientific, LIMS & Laboratory Software based inPhiladelphia, PENNSYLVANIA (USA)
The Ion Torrent Genexus System is the first turnkey next-generation sequencing (NGS) solution that automates the specimen-to-report workflow and delivers results in a single day with just two user touchpoints.* This highly flexible system lets you process samples—even just one—cost-effectively as they come in. And its simplicity and practicality make ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
Jaw crushers are always at the very front of the sample preparation chain, pre-crushing all hard and brittle materials. RETSCH jaw crushers are primarily used in laboratories and pilot plants under rough conditions but are also suitable for on-line quality control of raw materials. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The BB 50 is the smallest model of the RETSCH jaw crusher series and has been specially designed for sample preparation in the laboratory. The compact machine fits on any laboratory bench and offers safe and convenient handling. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness depend on the crusher type, selected gap width and ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 500 is specifically designed for accepting large feed sizes up to 110 mm. The gap width can be set stepless from 0-11 mm. Depending on the sample material, particle sizes down to 0.5 mm can be obtained in one working run, resulting in an excellent crushing ratio of 220. A throughput of up to 500 kg/h is possible with the BB 500. The RETSCH jaw crusher series is ...
Manufactured by:SUEZ Water Technologies and Solutions based inTrevose, PENNSYLVANIA (USA)
Real-time continuous monitoring for process control and regulatory compliance. Sievers InnovOx On-Line Total Organic Carbon (TOC) Analyzers offer continuous organics monitoring and multi-stream capabilities. The multi-stream capability allows user to run up to five samples if processes do not require continuous monitoring. ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 600 is specifically designed for accepting large feed sizes up to 350 x 170 mm. The gap width can be set stepless from 6 - 60 mm. Depending on the sample material, particle sizes down to 6 mm can be obtained in one working run, resulting in an excellent crushing ratio of 25. A throughput of up to 3500 kg/h is possible with the BB 600. The RETSCH jaw crusher ...