Show results for
Refine by
Locations
- USA
- Alabama
- Alaska
- Arizona
- Arkansas
- California
- Colorado
- Connecticut
- Delaware
- District Of Columbia
- Florida
- Georgia (USA)
- Hawaii
- Idaho
- Illinois
- Indiana
- Iowa
- Kansas
- Kentucky
- Louisiana
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- Montana
- Nebraska
- Nevada
- New Hampshire
- New Jersey
- New Mexico
- New York
- North Carolina
- North Dakota
- Ohio
- Oklahoma
- Oregon
- Pennsylvania
- Rhode Island
- South Carolina
- South Dakota
- Tennessee
- Texas
- Utah
- Vermont
- Virginia
- Washington
- West Virginia
- Wisconsin
- Wyoming
Fireproofing Equipment Supplied In USA
56 equipment items found
Manufactured by:Fire Barrier Experts by Sinisi Solutions LLC based inManasquan, NEW JERSEY (USA)
Sinisi Solutions designs custom fireproof boxes that will protect critical equipment and cabling for up to 4 hours in the event of a fire or explosion. Ensure critical equipment and controls always remain operational with a custom designed, and tested solution. ...
Manufactured by:Tolsa Group based inMadrid, SPAIN
ADINS Fireproof are ceramifying additives made from a natural silicate activated with different compounds such as bored or phosphorate-based silicate, with low melting point ...
Manufactured by:Geopolymer Solutions, LLC based inConroe, TEXAS (USA)
FP250 Cementitious Spray-On Fireproofing is a patented, geopolymer-based, trowel-applied or spray-on fireproofing material (SFRM) designed for industrial construction and repair. As an advanced fireproofing concrete and cementitious solution, FP250 provides unmatched strength and durability in extreme ...
Manufactured by:Ronan Engineering Company based inFlorence, KENTUCKY (USA)
The Ronan GS-400 Source Holder is a Fireproof Rated Design which mounts externally to the pipe or vessel. With a collimation angle of up to 90 degrees, it is ideal for continuous level applications where multiple sources would normally be required. The GS-400 is available in a variety of sizes providing shielding which meets all international standards for radiation ...
Premium
Manufactured by:Denios, Inc. based inLouisville, KENTUCKY (USA)
High-quality special container in aluminium, high stability with three fully welded aluminium profile frames. With fireproof padding and absorbent material in textured glass fibers. Dust-free internal fittings. For the safe storage and transport of defective or damaged lithium batteries according to ADR SV 376, P ...
Premium
Manufactured by:Denios, Inc. based inLouisville, KENTUCKY (USA)
Lithium-ion transport box K470 BatterySafe Compact. Approved dangerous goods packaging for lithium-ion batteries UN 3480, UN 3481. Maximum outside temperature below 212°F, no escape of flames and splinters in the event of an accident. High dielectric strength, i.e. also suitable for powerful batteries such as power tool batteries. Padding and absorbent material non-combustible, ...
Manufactured by:Carboline based inSt. Louis, MISSOURI (USA)
Accelerator A-20 is a powder mixed with water and injected into gypsum based fireproofing materials to reduce the set time and increase production rates. Also, Accelerator A-20 can be injected into portland cement-based fireproofing materials to reduce the set time. Accelerator A-20 can be used with Southwest Type 5GP, 5MD and 7GP ...
Manufactured by:Carboline based inSt. Louis, MISSOURI (USA)
TC-55 Sealer may be used as an adhesive and/or sealer with cementitious sprayed fire resistive materials and insulation products. TC-55 Sealer improves adhesive bond of fireproofing and insulation products to steel, concrete and other substrates. When applied as a topcoat/sealer, it improves most physical characteristics, reduces air erosion losses and may be used to color the ...
Manufactured by:The Strong Company, Inc. based inPine Bluff, ARKANSAS (USA)
Roof Fill Material is a pre-blended cementitious mixture specifically designed for new and replacement lightweight insulating deck construction. Roof Fill Material is designed to be lightweight, fireproof, versatile enough to be applied over a variety of bases, insulating and easy to apply. ...
Manufactured by:Carboline based inSt. Louis, MISSOURI (USA)
Acrilast Caulk II is a gun-grade, neutral-cure silicone sealant designed for use in joint terminations of Pyrocrete® Fireproofing products and dissimilar ...
Manufactured by:Thermal Resources Management based inWASHINGTON (USA)
Mineral Insulated Cable is the only fireproof cable system that can survive real-world fire conditions. Pyro cable is true fire survival cable, MI cable in conduit is not required, saving time and money on installation costs. MICC pyro cable is a fire survival armoured cable, via its highly durable metal ...
Manufactured by:J&M Industries, Inc. based inPonchatoula, LOUISIANA (USA)
Coated Airbag Tarps from JMI Legacy Manufacturing, L.L.C., are made from high-strength, woven nylon fabric with a silicone coating for impermeability. These tarps are used to contain paint overspray, abrasive blasting, lead abatement, fireproofing overspray, and general construction applications. Airbag tarps include 2-inch, heavy-duty reinforced webbing, rustproof grommets, and ...
Manufactured by:Carboline based inSt. Louis, MISSOURI (USA)
A/D Firefilm III C is a decorative, fiber free, thin film intumescent coating designed for the fire protection of steelwork for up to a 3 hour fire rating, depending on the design. The recommended use for this product is fireproofing of interior steel beams, columns, tubes, and pipes in clean room and sterile ...
Manufactured by:J&M Industries, Inc. based inPonchatoula, LOUISIANA (USA)
Containment Screens are made from high-strength, monofilament yarns. They are used as containment for abrasive blasting, paint overspray, fireproofing overspray, dust and debris protection, and general construction applications. Containment Screens are breathable and allow for slight light passage while providing containment. Containment Screens include 2-inch, heavy-duty ...
Manufactured by:Fiberlock Technologies, Inc. based inAndover, MASSACHUSETTS (USA)
Tested and EPA accepted at Battelle Laboratories of Columbus, Ohio, under EPA Contract #68-03-2552-T2005, Lag-Kote was found to be an acceptable encapsulant. Designed to encase spray-on fireproofing, asbestos-containing plasters and paints, transite, and asbestos-containing thermal insulation, Lag-Kote’s viscous formulation minimizes dripping, cleanup and product ...
Manufactured by:OilKontrol Florida based inHialeah, FLORIDA (USA)
Composed of: 1 absorbent confinement barrier made with 100% 3D polyester fabric, with UV protection to prolong its useful life outdoors, 10cm in diameter by 2.5m long, filled with 2.2kg of bio-absorbent collagen fibers, 100% organic, oleophilic, hydrophobic, fireproof, harmless to the environment, with a specific weight of 0.20 ...
Manufactured by:Fiberlock Technologies, Inc. based inAndover, MASSACHUSETTS (USA)
ABC Asbestos Binding Compound is a high solids asbestos encapsulant/sealant, designed to encapsulate friable Asbestos Containing Material (ACM) such as fireproofing and insulation ...
Manufactured by:Olsun Electrics Corporation based inRichmond, ILLINOIS (USA)
Choosing a dry type, substation transformer for your application is the smart choice for several reasons. They can be located indoors without the use of a fireproof vault or special catch basins, on roofs, near buildings or anywhere within an industrial or commercial building. [Olsun can also provide an outdoor application substation utilizing a NEMA 3R enclosure.] Industry ...
Manufactured by:Alkegen based inBuffalo, NEW YORK (USA)
AlkeGel Fyre meets rigorous Jet Fire testing and ASTM fire resistance requirements. It protects industrial piping from CUF (corrosion under fireproofing), and easily installs with low dust performance. AlkeGel Fyre meets the European regulatory requirement 1272/2008 (formerly European Commission Directive 97/69/EC) and does not require any special health hazard labeling. ...
Manufactured by:SMART Valves Inc. based inLong Beach, CALIFORNIA (USA)
The flexible outer material and Velcro system make them easy to install and remove in seconds, without the need for any tools during the steam trap PM maintenance or inspection. They are high-temperature resistant, durable in all weather conditions, and fireproof. Each jacket is sewed with high-quality aramid steel wire threads in the form of a jacket consisting of 3 layers with ...