Show results for
Refine by
Compression Testing Services Available In Canada
38 services found
by:Bureau Veritas North America, Inc. based inNew York, NEW YORK (USA)
Testing under standard CSA Z275.1 applies to Hyperbaric Chambers whose primary function is for treatment related to diving operations, work under compressed-air conditions, medical treatment applications and research. Breathing air produced by compressors for use with hyperbaric chambers must be collected and analyzed every six months by an accredited ...
by:Bureau Veritas North America, Inc. based inNew York, NEW YORK (USA)
CSA Z7396.1 Medical Gas Pipeline Systems. Analysis under CSA Z7396.1 applies to all facilities providing health care services, in both public and private sectors, which utilize pipelines for medical gases, medical vacuums, medical support gases and anesthetic gas scavenging systems. The standard is applicable to anyone involved in the design, construction, inspection and operation of medical gas ...
by:Bureau Veritas North America, Inc. based inNew York, NEW YORK (USA)
Production facilities using compressed air in the manufacturing process. Prevent product contamination; adhere to certification and equipment requirements. Regular assessment of compressed air systems can prevent potential costly production down time. Compressed air can be utilised for a number of applications during production and manufacturing processes. Bureau Veritas Laboratories industry ...
by:Bureau Veritas North America, Inc. based inNew York, NEW YORK (USA)
CSA Z275.2-15 Occupational Safety Code for Diving Operations. The testing package for CSA Z275.2-15 compliance applies to all types of work and employment conducted as part of occupational diving operations. This package provides analysis for the use of air in various situations such as: SCUBA diving systems, surface supply diving systems, deep diving systems, one-atmosphere ...
by:Bureau Veritas North America, Inc. based inNew York, NEW YORK (USA)
CSA Z180.1-13: The testing package for CSA Z180.1-13 assesses the purity of compressed breathing air supplied to service outlets, and for breathing air systems required to produce, store and distibute such air. This standard package is applicable to compressed breathing air and compressed breathing systems used for supplied-air ...
Manufactured by:Dhand Steel Traders based in, INDIA
A simple uniaxial test or compression test does not always provide adequate information. Instead, when a sample is tested against bends and flexes, it experiences an intricate amalgamation of forces like tension, shear, and compression. The testing equipment simulates a loading condition that is ...
Manufactured by:Resonetics based inNashua, NEW HAMPSHIRE (USA)
UV curing stations (metal halide and LED sources). 3D printing (SLA, FDM) and laser cutting for quick turn handle form evaluation, test fixture componentry, anatomical modeling, etc. Automated tensile/compressive test stand for bond strength analysis and track ability testing. Assorted wet lab and vascular model performance ...
by:Sigma Test and Research Centre based inDelhi, INDIA
Cement Testing Chemical analysis: Test Method: IS: 4032-1985 Compressive strength: Test Method: IS: 4031 (P-6) 1988 Fineness: Test Method: IS: 4031 (P-2)1990 Heat of Hydration: Test Method: 4031 (P-9) 1988 Loss On Ignition: Test Method: IS: 4032-1985 Setting Time: ...
by:TRI Air Testing Inc. based inRound Rock, TEXAS (USA)
The Defense Compressed Air Testing (DCAT) program was developed to support the NAVSEA sponsored, NSWC managed, defense compressed breathing air testing program. This is a program for the periodical verification requirements of compressed breathing air quality. ...
by:TRI Air Testing Inc. based inRound Rock, TEXAS (USA)
Our team of experts, scientists, and technicians are trained to support a variety of industries with slightly different needs surrounding compressed air testing. We handle all types of testing needs from DIY and equipment rental to full-service-oriented solutions with our experts training and testing on-site. ...
Manufactured by:SM Tech Co., Ltd. based inBucheon-si, SOUTH KOREA
We begin manufacture after passing strict compression vessel design tests administered by the Korea Industrial Safety & Health Agency. If necessary, interim, water pressure and non-destructive tests are applied to make/install the safest products ...
by:GIE Group based inMontreal, QUEBEC (CANADA)
Determination of groundwater flows and drainage. Inspection and supervision of piles. Hydrogeological Studies: Groundwater supplies, Tests. Quality control of materials: Verification and approval of concrete cement mix formulas. Sampling and testing of plastic concrete. Sampling by coring hardened concrete. Compression testing on ...
Manufactured by:Flexitallic US LLC. based inHouston, TEXAS (USA)
Flexitallic invest significantly and continuously in technology to support future development of materials and to set new industry benchmarks for the evaluation of existing ...
Manufactured by:Vereinigte Fullkorper-Fabriken GmbH & Co. KG based inRansbach-Baumbach, GERMANY
Active research and development on behalf of customers, as well as new and further development of products and materials, ensure the continuous expansion of the product range and make VFF a competent partner who knows and understands how to implement customers' needs. Our VFF Research & Development department works together with colleges, institutes and universities and operates its own ...
Manufactured by:Faerch A/S based inHolstebro, FRANCE
Eco-design work: Research on new technical materials, biomaterials, etc. Reduction in component weight. Optimization of thermoformed parts using software to simulate processes, calculate mechanical resistance, distribute material thicknesses, ...
Manufactured by:Sanyleg Srl based inCastel Goffredo, ITALY
Sanyleg has state-of-the-art equipment to carry out certified tests on the effective elastic compression of its items. Particular attention is paid to Research and Development to be always attentive to market demands by continuously creating new samples of graduated compression elastic stockings for medical and sports use, and new items that will ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
One of the main advantages of the discrete approach as defined by Itasca (PFC) is that it allows to accurately reproduce the size distribution, the grain shape (rounded, angular, or elongated), the mineralogical composition, as well as the mechanical and thermal properties of each ...
by:GMS Internacional, S.L. based inBarcelona, SPAIN
Specialists in load testing of columns in photovoltaic plants. Over the past 10 years, GMS Internacional has specialised in carrying out surveys for photovoltaic plants all over the world. One of the most common tests for these types of projects is the pole load test or «pull-out test». These tests are intended to determine if the desired type of profile (or pole) is capable of ...
Manufactured by:Eralp and Energy Technologies based inNilüfer, TURKEY
As pressure vessels are high-risk equipment, all the materials used must comply with standards and be tested more rigorously than other materials. To this end, Eralp can carry out mechanical tests on the materials to be used and the equipment we manufacture in our existing quality laboratory. It can also carry out all the necessary tests for Procedure Qualification Record (PQR) and welder ...
by:Brayman Construction Corporation based inSaxonburg, PENNSYLVANIA (USA)
The original scope of work for this project was for the design and installation of approximately 800 micropiles for roughly one half of the intended plant expansion. The micropiles were designed for 350tons axial compression, 125tons axial tension and 15tons lateral load capacity. The design called for the use of a minimum 11-3/4in OD casing and corresponding core steel to meet the required ...