Refine by
29 Cfr Services
47 services found
by:Safex based inWesterville, OHIO (USA)
Then, Safex will develop a written report outlining opportunities and priorities based on the following observations: A review of the company activities to identify applicable sections of 29 CFR 1926 and/or 1910. A review of existing written programs for compliance with the applicable OSHA standards. A facility walk-through and observation of work practices. A ...
by:Environmental Remediation Specialists Inc. (ERS) based inTulsa, OKLAHOMA (USA)
Our team is OSHA trained to ensure cleanup is professionally performed within the guidelines of the OSHA Bloodborne Pathogen standard found in 29 CFR ...
by:Environmental and Safety Resources, Inc. based inSaint Peters, MISSOURI (USA)
Process Safety Management and EPA’s Risk Management Programs. Designed for the chemical industry in compliance with the OSHA regulations in 29 CFR 1910.119 and Section 112(r) of the 1990 Clean Air Act. This includes information gathering, hazard analysis, operating procedure development, technical analysis, and employee training. Any specific aspect of ...
by:Environmental Remediation Specialists Inc. (ERS) based inTulsa, OKLAHOMA (USA)
Some of the confined space related services we provide include tank and pit cleaning, off-spec product removal, tank inspections, routine maintenance assistance, and specialized system retrofit events. ERS Confined Space Teams are trained in accordance with the OSHA Confined Space Standard per 29 CFR ...
by:Environmental and Safety Resources, Inc. based inSaint Peters, MISSOURI (USA)
Designed for the chemical industry in compliance with the OSHA regulations in 29 CFR 1910.119 and Section 112(r) of the 1990 Clean Air Act. This includes information gathering, hazard analysis, operating procedure development, technical analysis, and employee training. Any specific aspect of compliance or complete programs are available to meet your specific ...
Manufactured by:Reading Thermal based inSinking Spring, PENNSYLVANIA (USA)
Reading Thermal performs oven safety inspections to bring customers in compliance with regulations adopted by OSHA as set forth in Standard 29 CFR Bakery Equipment 1910.263(L)(9)(ii). “All safety devices on ovens shall be inspected at intervals of not less than twice a month by an especially appointed, properly instructed bakery employee, and not less than ...
by:Environmental Monitoring Technology LLC based inHendersonville, TENNESSEE (USA)
Law - Williams-Steiger Occupational Safety and Health Act (OSHA), Clean Air Act (CAA), Federal Toxic Substance Control Act (TSCA) Regulations - 29 CFR 1910.1001, General Industry Standards; 29 CFR 1926.1101, Asbestos Standard for Construction Industry; 40 CFR 61, National Emission Standards for Hazardous Air ...
by:Industrial Consultants, LLC based inOwasso, OKLAHOMA (USA)
Compliance audits are a requirement for all PSM facilities under OSHA 29 CFR 1910.119, and EPA 40 CFR Part 68 68.58 that contain a threshold quantity of a highly hazardous chemical. The auditing process is imperative to outline deficiencies and gaps in programs and documentation. If compliance audits are not performed within the required ...
by:Primatech Inc. based inColumbus, OHIO (USA)
Companies that handle highly hazardous chemicals in excess of threshold quantities must comply with OSHA's Process Safety Management (PSM) standard, 29 CFR 1910.119 and EPA's Risk Management (RM) Program rule, 40 CFR Part 68. These regulations are performance-based and compliance with them is quite different from specification-based regulations ...
by:ERAtech Environmental, Inc. based inDayton, OHIO (USA)
ERAtech Environmental's staff include Asbestos Hazard Evaluation Specialists (AHES) certified by the Ohio Department of Health who have experience in the identification, detection and assessment of asbestos-containing materials (ACM) pursuant to the regulatory requirements of OAC 3701-34. Prior to any renovation or demolition activities, and to be in compliance with OSHA 29 ...
Manufactured by:ioMosaic based inSalem, NEW HAMPSHIRE (USA)
Yet, Asset Integrity findings (also referred to as Mechanical Integrity) remain on top of OSHA’s citation list during Process Safety Management regulation 29 CFR 1910.119 ...
by:VOETS, LLC based inNew York,, NEW YORK (USA)
The OSHA Construction Standard (29 CFR 1926) was issued to protect employees of a sector of the U.S. economy which continues to have the highest rate of work-related injuries. These standards should never be taken lightly and should be maintained to the highest standard to protect against violations, but more importantly to reach the highest level of employee ...
by:Primatech Inc. based inColumbus, OHIO (USA)
The chemical facility National Emphasis Program (NEP) is a focused inspection program by OSHA to verify compliance with OSHA's Process Safety Management (PSM) standard (29 CFR 1910.119) at covered facilities. It began in November, 2011 and follows on from a pilot chemical facility NEP initiated in July, 2009 and a petroleum refinery NEP that began in June 2007 ...
by:Ameriwaste Environmental Services Inc. based inValley View, OHIO (USA)
Ameriwaste Environmental’s field service department stands ready to assist your individual needs for sampling and analysis, lab pack remediation, and environmental and industrial services. Our field service personnel are certified in the following areas: 40-Hour Hazardous Materials, Confined Space, 29 CFR, 49 CFR and 40 ...
by:First Strike Environmental (FSE) based inRoseburg, OREGON (USA)
All on-site team members involved in the investigation of hazardous chemicals and wastes have completed Hazardous Material Training as specified by OSHA 29 CFR 1910.120 (40-Hour HAZWOPER Training plus annual 8-Hour Refresher ...
by:Environmental Products & Services of Vermont, Inc. based inSyracuse, NEW YORK (USA)
All of our employees are highly trained and certified to perform industrial maintenance services in accordance with OSHA 29 CFR 1910 and 1926 standards. We understand that down time can be costly to our customers. Our maintenance teams are available 24/7 whether you require scheduled routine maintenance, plant shut down or closure support. EPS is prepared to ...
by:IEA based inBrooklyn Park, MINNESOTA (USA)
Cr(VI) is a recognized human carcinogen that can impact industrial workers in many different occupations. It is present in many different compounds that have a variety of industrial applications, e.g. chromate pigments in dyes, paints, inks, and plastics; chromates added as anticorrosive agents to coatings, and chromic acid electroplated onto metal parts. Cr(VI) can also be formed when performing ...
Manufactured by:Velocity Dynamics, LLC. based inLouisville, COLORADO (USA)
Combined with our unmatched product offering, our in-house fabrication capabilities sets VeloDyne apart from any other chemical equipment and bulk solids handling company in the industry. VeloDyne is compliant with the standards of the Occupational Safety and Health Administration of the United States Department of Labor (OSHA), the National Electric Code (NEC), and the American Standards ...
by:HSI based inVancouver, WASHINGTON (USA)
SafeTec’s 24-Hour Emergency Response Hotline allows you to access your safety data sheets (SDS) by fax, and to receive emergency medical support by phone. We’ll fax you any SDS in your inventory 24 hours a day, 7 days a week, 365 days a year, and our medical specialists provide round-the-clock assistance in case of chemical spills or ...
by:Rescue Solutions LLC based inFlemingsburg, KENTUCKY (USA)
Rescue Solutions has been serving communities across the world for many years. Our team has a combined experience of more than 100 years, delivering top-rated safety and rescue services in the most efficient manner. Our confined space inspection and training services are designed to provide your workers with safety instructions that comply with the latest industry standards and guidelines, ...