Refine by
Anemometer Services
34 services found
by:Deutsche WindGuard GmbH based inVarel, GERMANY
The use of wind tunnel-calibrated anemometers is necessary in order to identify the wind resource at planned wind farm sites. Deutsche WindGuard offers anemometer and wind vane calibration and classification services using two out of four company-owned wind ...
by:DEWI GmbH - Deutsches Windenergie Institut based inWilhelmshaven, GERMANY
Calibrated anemometers are essential for accurate wind speed and power curve measurements, and each one must be individually calibrated prior to a measurement campaign. As an accredited service, DEWI offers calibration to the MEASNET standard. Wind vane testing is also advisable, and can be performed by our experts. ...
by:Deutsche WindGuard GmbH based inVarel, GERMANY
With more than 15,000 DAkkS-accredited anemometer calibrations annually, the WindGuard Wind Tunnel Centre is the first choice for many manufacturers and developers worldwide. Our four Calibration Wind Tunnels are accredited and officially recognised by the NMI (National Metrology Institute), which regularly performs comparative measurements here. ...
by:Deutsche WindGuard GmbH based inVarel, GERMANY
Our own research and cooperation in all relevant bodies underline our claim as the foremost experts in all matters relating to anemometers. A WindGuard Certificate continues to stand for the best in ...
by:Estia Consulting & Engineering S.A. based inThermi- Thessaloniki, GREECE
Estia Consulting & Engineering SA owns a cup anemometer calibration laboratory. The laboratory is accredited according to ISO17025:2005. It is fully equipped and performs calibrations for all types of cup anemometers. The calibrations are conducted in the closed test section wind tunnel which has been constructed by the company. ...
Premium
Manufactured by:Unicon Engineers based inCoimbatore, INDIA
Unicon is equipped to carryout GD testing of any make ESPs with more than 35 years experience in the ...
Manufactured by:Applied Technologies, Inc. (ATI) based inLongmont, COLORADO (USA)
Upgrade Your Old ATI Ultrasonic Anemometer. Do you still have an old Applied Technologies ultrasonic anemometer. The one with the separate electronics box. We can upgrade your ultrasonic anemometer to the new model with the electronics located inside the probe. Taking advantage of this upgrade will give you a completely new ultrasonic ...
Manufactured by:Ge:Net GmbH based inClausthal-Zellerfeld, GERMANY
All our installation services are conducted strictly according to IEC 61-400 standards. For example all sensors will be handled with extreme care – even a little hit on the cups of an anemometer can spoil the calibration of the ...
Manufactured by:FT Technologies based inSunbury-on-Thames, UNITED KINGDOM
The FT7 Series of ultrasonic anemometers is the result of FT Technologies’ 20 years of experience designing wind sensors. In that time, FT sensors have been installed all over the world in a range of applications from wind turbines to meteorology to marine navigation. ...
Manufactured by:Applied Technologies, Inc. (ATI) based inLongmont, COLORADO (USA)
Here's what you need to know about getting it repaired. Send an email to the address listed below and provide as much information about your sonic anemometer or other ATI equipment as you can (model number, serial number, purchase date, etc..). We will reply with information about how and where to send your ATI ...
Manufactured by:Boreal Laser Inc. based inEdmonton, ALBERTA (CANADA)
The Remote Monitoring + Control Centre can collect and store data from many different inputs that include: the GasFinder unit, weather data (3D Sonic Anemometer and meteorological station), and collect images and videos from a ...
Manufactured by:Kanomax USA, Inc. based inAndover, NEW JERSEY (USA)
Kanomax provides a complete line of products, from field test equipment to instruments used in the actual test and development of HVAC testing equipment. Rugged but accurate field instruments for the TAB technician, reliable anemometers and particle counters for development support, and precise monitoring instruments for laboratory environment control – we have it ...
by:Young Calibration Ltd based inShoreham by Sea, UNITED KINGDOM
Air velocity calibration and anemometer calibration services are undertaken in the laboratories' universal UKAS accredited wind tunnels, offering extreme accuracy in both low and high speed operating modes. All types of anemometers and wind speed instruments can be calibrated. The facility can offer independent, UKAS accredited air velocity calibration for all ...
Manufactured by:Leomi Instruments Pvt. Ltd based inGandhinagar, INDIA
LEOMI provides Air Velocity calibration services for various type of Air Velocity Instruments such as Insertion Thermal Mass Flow meter, Hot-wire / Vane Anemometer, Pitot Tube and more. We join hands with customers who are using other make air velocity products. And we provide quality calibration services to produce effective outputs that will satisfy the needs and ...
Manufactured by:Applied Technologies, Inc. (ATI) based inLongmont, COLORADO (USA)
Do you have a special application that requires a wind velocity measurement, but the off-the-shelf ultrasonic anemometers don't physically fit your application? Call the Applied Technologies, Inc. factory, we have no problem adapting and tailoring our ultrasonic technology to your ...
by:DEWI GmbH - Deutsches Windenergie Institut based inWilhelmshaven, GERMANY
Reliable predictions of the energy yield of wind farms are only possible on the basis of accurate near-site wind speed measurements. The critical aspects are selection of where the tower is to be placed, selection and calibration of anemometers, the height of the met mast and the installation of the sensors on the met mast. DEWI has been specialised in this area for many years ...
Manufactured by:Wind Measurement International (WMI) based inBerkhamsted, UNITED KINGDOM
Wind monitoring masts that have been installed for extended periods of time are at increased risk of failing, with potentially fatal consequences. A full inspection and repair service offers you complete peace of ...
by:iscientific Pte Ltd based inSingapore, SINGAPORE
We provide rental of environmental testing meters such as IAQ Meter, Particle Counter TSI DustTrak DRX Model 8533, TSI Environmental Enclosure 8535, TSI 9565, Probe 982, Probe 964, Carbon Dioxide, Carbon Monoxide, Temperature and Relative Humidity Meter, MiniRAE 3000 VOC Meter, Sound Level Meter and Lux or Light Meter, Anemometer or Air Velocity Meter, Manometer or Differential ...
Manufactured by:Kanomax USA, Inc. based inAndover, NEW JERSEY (USA)
As many Kanomax instruments are used to measure airflow, particle counts, temperature, pressure, humidity, etc. in environments where a half of a percentage point of error could be absolutely critical, we take calibration service and repair very seriously. That’s why we employ the most proven, experienced service technicians and relay on the best calibration equipment money can buy. ...
by:Hitek Calibration Services based inHorsham, UNITED KINGDOM
The fully equipped mobile calibration laboratory is available for onsite calibrations throughout the UK - now offering UKAS calibration. For organisations which cannot afford to have equipment taken offsite for days or weeks to be calibrated, Hitek can provide the perfect solution to your problem with the Mobile Calibration Lab. Hitek was one of the first organisations to offer a mobile ...
