Refine by
Arsenic Services
150 services found
by:Brooks Applied Labs based inBothell, WASHINGTON (USA)
The experience of Brooks Applied Labs comes into play when arsenic speciation in difficult matrices is to be determined. We have developed a variety of different arsenic testing methods that utilize different chromatographic separation modes. These methods allow us to provide the lowest detection limits to our clients for their toughest samples. For instance, ...
by:Air & Water Quality, Inc. based inFreeport, MAINE (USA)
The United States Environmental Protection Agency sets a Maximum Contaminant Level (MCL) for contaminants in public drinking water. The MCL is the maximum concentration that is allowed for public water supplies. For arsenic, the MCL is 10 ug/L (which is the same as 0.01 mg/L). While the EPA does not regulate private well water quality, home owners are advised to test and, when ...
by:CETCO Energy Services based inHouston, TEXAS (USA)
This media is based on organoclay technology like CrubeSorb but has been heavily modified to enhance mercury and arsenic adsorption through both physical removal and chemical ...
by:Brooks Applied Labs based inBothell, WASHINGTON (USA)
Arsenic is naturally-occurring throughout the environment and also widely used as a preservative for treated wood and as a pesticide in fields where we grow our food. Because of its chemical nature, it is frequently bioavailable and easily absorbed. Accurate and precise measurements of this classified human carcinogen are critical for managing our environment and protecting human ...
by:US Water Consultants, Inc. based inWindham, NEW HAMPSHIRE (USA)
US Water Consultants offers comprehensive testing and remediation services for arsenic in water. Our dedicated team uses advanced techniques to detect and eliminate arsenic risks, providing you with a safer, healthier ...
Manufactured by:ChartWater™ - A Chart Industries Company based inDuluth, GEORGIA (US) (USA)
The dangers of arsenic in drinking water are masked by its colorless, odorless appearance. It is a carcinogen that occurs naturally in groundwater and is known for leading to dangerous health conditions such as cancer and heart failure. Compliance with the U.S. Environmental Protection Agency (EPA) and the World Health Organization’s (WHO) maximum contaminant level (MCL) of ...
by:Walkerton Clean Water Centre (WCWC ) based inWalkerton, ONTARIO (CANADA)
In 2019, the Walkerton Clean Water Centre (WCWC) completed a project with a community located in Southwestern Ontario. The community relies on a well that has arsenic concentrations bordering the recently reduced regulatory limit. WCWC tested the proposed treatment options on-site using the community’s source water. Bench scale experiments were used to test the ...
by:Enviro-Vac Corp. based in, BRITISH COLUMBIA (CANADA)
Arsenic decontamination, lead paint & coating abatement, heavy metals dust - safe work plans. safety first. Fully compliant with epa certification section 402 toxic substance control act - certified by canadian nuclear safety commision for non-destructive testing Protecting workers and the environment is a top priority at Enviro-Vac. ...
Premium
Manufactured by:Sorbster Inc based inEuclid, OHIO (USA)
Sorbster provides treatability studies through a Send Us Your Water program that evaluates contaminant removal for all types of waters and water treatment markets. These treatability studies determine percent removal curves as a function of water-to-media contact time and are good predictors of field ...
Manufactured by:JADCO Manufacturing, Inc. based inHarmony, PENNSYLVANIA (USA)
The highest quality full line custom steel fabrication. With a full arsenal of fabrication equipment, our team meets challenging projects with quality and efficiency every ...
Manufactured by:Fab’entech based inLyon, FRANCE
Fab’entech develops therapies intended for infected patients or contact cases who are at risk of seeing their condition deteriorate into serious forms of infectious diseases for which the treatment arsenal is ...
Manufactured by:UMP Technika based inUkmerge, LITHUANIA
With more than 15 YEARS OF EXPERIENCE in fields of metalworking and manufacturing under our belts we have gathered quite the arsenal of machinery and master ...
Manufactured by:Aqua Unique Production AS based inLierskogen, NORWAY
Phosphorous Removal & Recovery, iron removal, TOC reduction, copper removal, arsenic removal, co2 ...
Manufactured by:Pumps UK Online Ltd based inRochester, UNITED KINGDOM
Pumps UK were contacted by a company that specialise in energy saving recently, and we were asked to carry out a life cycle survey on all the heating pumps for a building at Royal ...
Manufactured by:ChartWater™ - A Chart Industries Company based inDuluth, GEORGIA (US) (USA)
When its time to replace the media in your arsenic treatment system, call AdEdge for turnkey, professional media replacement ...
by:Water Quality & Treatment Solutions, Inc. (WQTS) based inCanoga Park, CALIFORNIA (USA)
Implementing treatment technologies for contaminant removal from groundwater has unique challenges. From arsenic, to perchlorate, to volatile organic chemicals, WQTS staff has evaluated and implemented both conventional and innovative groundwater treatment technologies. The following are example projects dealing with contaminant removal from ...
by:PRIMA Environmental, Inc. based inEl Dorado Hills, CALIFORNIA (USA)
The most common secondary effects of concern are oxidation of naturally occurring soil chromium to Cr(VI) during ISCO or mobilization of arsenic upon addition of a electron donor to stimulate anaerobic bioremediation. The magnitude, duration and significance of secondary effects is ...
by:Hirsch Gibney, Inc. based inGolden, COLORADO (USA)
Soil and groundwater are 'contaminated' when naturally occurring elements (e.g., radon gas, arsenic) or man-made compounds (e.g., solvents, hydrocarbons) have a complete exposure pathway to human or ecological receptors at concentrations that meet the criteria established to cause adverse effects. ...
Manufactured by:Industrial Water and Environmental Technology (IWET) a.s. based inBrno, CZECH REPUBLIC
Low operating cost (less than 0.3 $ per 1.000 litres), energy effective (9 kW for 10.000 litres/h), water keeps its natural vital minerals, easy to use - full automatic, minimal maintenance, special technology - arsen and heavy metals filtering, higher investment, not filter brackisch and sea ...
by:Cedar Creek Engineering, Inc. based inWinchester, KENTUCKY (USA)
At Cedar Creek Engineering, we have used chemical oxidation since 2001 to treat organic compounds, including petroleum hydrocarbons and chlorinated solvents, as well as inorganic contaminants, such as arsenic. We provide field services for both in-situ and ex-situ applications. We also perform treatability bench testing in our in-house laboratory. Because we are leaders in our ...