Refine by
Floating Turbidity Barrier Services
3 services found
Manufactured by:Aer-Flo, Inc. based inBradenton, FLORIDA (USA)
The standard practice in installing barriers is to keep the lower edge of the barrier about 12 inches above the bottom as shown in Figure 1. When the lower edge of the barrier is long enough to drape on the bottom, silt will build up as shown in Figure 2. If the build-up is allowed to collect over a long period of time, the barrier may be pulled beneath the surface of the water. The build-up also ...
Manufactured by:Enviro-USA American Manufacturer, LLC a division of GEI works. based inPalm Bay, FLORIDA (USA)
Enviro-USA now offers: Consulting, Designing, Drawing up Plans and Supervising Installations, for turbidity curtain and oil spill containment projects, including civil engineering & marine construction projects that require silt, sediment, PCB or contaminants contained before or during a marine construction project. Regardless of the size of your project or the application, our experienced ...
Manufactured by:Dandy Products, Inc based inMount Vernon, OHIO (USA)
The effects of erosion and sedimentation are well known. Typically, when the earth’s surface is exposed to the impacts of rainfall, there is an increase in the volume and velocity of runoff. This sets off a chain reaction that results in the transport and deposition of sediment, reduced stream capacity, and ultimately increased stream scour and ...