Refine by
Fluidized Bed Services
40 services found
by:MinPlus B.V. based inSpankeren, NETHERLANDS
MinPlus owns know-how and patented fluidized bed solutions that allow for the Controlled Thermal Conversion (CTC) of sludges with calorific values as low as 1.4 MJ/kg without the need for support fuel firing. Sludges range from deinked paper sludge to sewage sludge and can also include sludges from other industrial waste streams. ...
Manufactured by:Kersten Kunststofcoating B.V. based inBrummen, NETHERLANDS
Fluidized bed coating is a process in which pre-heated components are immersed in a bath containing powder. Air is blown through the porous floor of the bath, which keeps the powder particles moving and makes it behave like a liquid. When the sandblasted and heated component is immersed in this fluidized bed, the powder particles ...
Manufactured by:SCHWING Technologies GmbH based inNeukirchen-Vluyn, GERMANY
Apart from handling the “hardware” and the required environmental protection and safety aspects the operators also learn, for example, about the relationship between partial quantities, fluidized bed and fluidization gases enabling them to assess these elements. ...
Manufactured by:Bioenergy and Sustainable Technologies GmbH (BEST) based inGraz, AUSTRIA
Further development of DFB gasification (steam gasification by means of a dual fluidized bed), thermo-chemical conversion of biogenic raw materials, residues and waste into high-quality ...
Manufactured by:Arena Comet NV based inLokeren, BELGIUM
Arena Comet provides, besides engineering and production of thermal cleaning equipment, repairs and technical assistance on all thermal cleaning equipment, pyrolysis oven and fluid clean sand bed, around the world. Furthermore, we provide yearly maintenance on pyrolysis burn-off ovens, fluidized beds and carry out service on all types of thermal ...
by:Merichem Company based inHouston, TEXAS (USA)
Any processing carried out on a sulfur-containing stream will generate a non-condensing overhead off gas that contains H2S: visbreaking, coking, fluidized-bed catalytic cracking, hydrotreating, hydrofining, and hydrodesulfurization. Merichem’s LO CAT process has proven to be a highly effective desulfurization process that is capable of producing sulfur free ...
Manufactured by:SCHWING Technologies GmbH based inNeukirchen-Vluyn, GERMANY
Comprehensive special knowledge and proven system solutions in heat treatment and the thermal cleaning of metal parts, especially high-temperature know-how in fluidized bed process technology and the continuous improvement of the control and automation technology in regard to user comfort and environmental compatibility represent only some of the chief benefits ...
by:Experts Water Technologies Co. Ltd. (EWTCO) based inJubail Industrial city, SAUDI ARABIA
Packaged Type Waste Water Treatment, Extended Aeration (AE), Sequencing Batch Reactor (SBR), Membrane Bioreactor (MBR), Moving Bed Bioreactor (MBBR), Fluidized Bed Bioreactor (FBBR)Rotating and Biological Contactor ...
by:Leroux & Lotz Technologies based inNantes, FRANCE
2014 Robin Roussillon: Waste wood Type B & C plus waste paper rejects - Bubbling Fluidized Bed (BFB) combustion of 24MWth producing saturated steam at 40 bars supplying the chemical platform of Roussillon replacing coal - 68,000 tonnes of waste recovered with reduction in CO2 emissions of 56,000 tonnes per ...
by:Gammie Air Monitoring LLC based inWest Simsbury, CONNECTICUT (USA)
Sewage (or biosolids as we prefer to call it) treatment plants are certainly one of the more odoriferous sources, and one which we have plenty of experience with. Our first introduction to the incineration process was with the multiple hearths which then spread into fluidized bed incineration. As a side note we have performed extensive emissions testing on ...
Manufactured by:EQTEC PLC and Group based inSant Martí, SPAIN
For the past 10 years, the team has worked with EQTEC to co-develop a gasification pilot plant based on EQTEC’s bubbling fluidized bed Advanced Gasification Technology and especially, EQTEC’s air-blown gasification capabilities for producing syngas for traditional, combined heat and electric power (CHP). ...
Distributed by:Technibus based inCanton, OHIO (USA)
For more than 20 year, TECHNIBUS has been insulating bus bar with epoxy using state of the art technology for both manufacturers of switchgear and contractors involved with switchgear repairs and retrofit projects. High dielectric strength, excellent chemical resistance, durable mechanical characteristics, 130°C thermal rating and high thermal emissivity are distinct advantages our insulation ...
Manufactured by:Svenskt Gastekniskt Center AB (SGC) based inMalmö, SWEDEN
We strive to collect data on biomass gasifiers around the world. In SGC Rapport 234 Biomass gasifier database for computer simulation purposes published 2011 the situation up to that date was summarised. We are eager to keep the database up-to-date and therefore welcome you to add your recent data to our database. The database includes data from the following kinds of ...
Manufactured by:CarboTech AC GmbH based inEssen, GERMANY
If your activated carbon is fully saturated or at the end of its service life, we have the answer – our flexible Exchange Service supplying your mobile or stationary solution with fresh activated carbon or a new Plug & Clean system. We’ll get the fresh activated carbon working for you and remove the used carbon from site, eventually feeding it back into the cycle after ...
by:Ingenia Consultants & Engineers BV based inEindhoven, NETHERLANDS
Ingenia provides assistance with the design, selection and implementation of energy efficient drying technologies for biomass, waste, sludge and other waste ...
by:Sargent & Lundy based inChicago, ILLINOIS (USA)
Sargent & Lundy has engineered more coal-fired units than any other AE in the United States. Our 544 coal-fired unit designs represent 61,353 MW of generating capacity. Our experience spans a wide range of coals and lignite and the advanced technologies that deliver environmentally sound operation. We have received design authorizations from approximately 60 clients, including several ...
Manufactured by:aixprocess GmbH based inAachen, GERMANY
The System Still Matters for Design and Optimisation of Solid Operations. Many of our customers are faced with a simple question. When two gas-solid cyclones are connected in a series, and the goal is to increase the overall separation efficiency, which one do you target for modification (when your budget is too small to tackle the whole system)? What changes if the separated stream from the ...
Manufactured by:Verantis Environmental Solutions Group based inMiddleburg Heights, OHIO (USA)
System upgrades to meet new emissions or process requirements. Whether you’re currently using Verantis systems and environmental control equipment or another brand, Verantis can evaluate your existing equipment and recommend upgrades that can enhance system performance or capacity. Many of our scrubbing and thermal treatment systems are retrofit-ready, and our team of field technicians can ...
by:Doosan Lentjes GmbH based inRatingen, GERMANY
Through ongoing research and development we constantly refine our products and drive world-class innovation. We have been leading the way in engineering innovation since Lentjes was founded in 1927. Over the years, we have pioneered technologies including the world’s first Circulating Fluidised Bed (CFB) boiler and the wet lime/limestone Flue Gas Desulpherisation (FGD) ...
by:Western Research Institute (WRI) based inLaramie, WYOMING (USA)
WRI is pioneering coal combustion and gasification technologies for integrated, ultra-clean power plants. The technologies will provide the flexibility to produce 'opportunity' products, including clean transportation fuels, high-value chemicals, synthesis gas, and hydrogen in concurrence with the U.S. Department of Energy’s Vision 21 ...