Refine by
Humidity Testing Services
30 services found
by:Nemko based inLysaker, NORWAY
PTI currently offers 8 different thermal and humidity chambers, ranging from small chambers to walk-in chambers. They range from 36″ X 36” X 36” to a walk-in chamber of 8’ X 6’ X 7’ and temperatures from -73°C to 177°C. All PTI Chambers can be programmed for different ramp profiles and dwell times. ...
by:Bureau Veritas North America, Inc. based inNew York, NEW YORK (USA)
These tests are used to evaluate the long-term weathering characteristics of mine waste materials disposed under subaerial conditions. Tests are run in strict adherence to standard procedures. Possible analyses of leachates include: pH, EC, ORP, electrical conductivity, TDS, hardness, sulfate, anions (nitrate, nitrite, chloride, fluoride, phosphate, ...
by:Testing Services Group, LLC based inLapeer, MICHIGAN (USA)
TSG has an extensive base of environmental chambers for thermal cycling testing. Chamber sizes range from small reach-ins to large walk-in styles. Temperature ranges from -40C to +125C are featured. Thermal shock and humidity testing capabilities are also ...
Manufactured by:SOLARC Innovative Solarprodukte GmbH based inBerlin, GERMANY
SOLARC posseses a climatic test chamber to simulate different environmentalconditions such as heat / humidity test, climatic cycling test and long-term tests(aging tests) for items still in the development or already in the production. In addition, we carry out for our clients different types of ...
Manufactured by:Spectral Systems, LLC based inHopewell Junction, NEW JERSEY (USA)
Dimensional Tolerences. Coating Adhesion, Humidity and Abrasion Testing. Transmission and Reflection from UV to the FAR-IR Spherical Centering Error. Angular Measurements. Inspection per MIL-0-13830 & MIL-C-48497. Surface RMS & Peak to Valley ...
by:Bureau Veritas North America, Inc. based inNew York, NEW YORK (USA)
While similar to humidity cell testing in some ways, these tests simulate site waste disposal conditions (such as saturated, non-saturated or partially saturated) more closely. Water is typically added in a trickle leach fashion, but periodic flushings are possible to better simulate field conditions. Analyses that can be conducted on leachate ...
by:Egyptian Engineering Systems (EES) based inCairo, EGYPT
International Accredited Validation Services According To ISO 17020:2012 for Clean Room & Associated Controlled Environment complies with ISO 14644-1:2015 requirements: • HEPA filter DOP integrity testing in air handling units & clean rooms • Airborne non-viable particle counts test • Air speed test • Air change rate test • Room ...
by:IMR Test Labs based in
Creep and Stress rupture tests evaluate the ability of a part or material to safely hold a load, usually at in elevated temperature and sometimes humidity-specific environments. Creep Testing measures the deformation of the material and the time it takes to rupture, Stress Rupture measures only the time it takes to rupture. ...
by:Westpak Inc based inSan Jose, CALIFORNIA (USA)
One of the first test processes often required prior to conducting physical testing on the package, container, or packaging component being evaluated is Environmental Conditioning; this process brings the item to be tested into equilibrium with specific temperature and humidity conditions prior to ...
by:Materials Testing Consultants (MTC) based in, MICHIGAN (USA)
CWI Steel Inspection NDT Examinations Special Inspections Precast Inspections Floor Flatness/Levelness Piling/Grouting Inspections Concrete Mix Design Roofing Inspection Masonry Inspection Delamination Surveys In-house Laboratory Engineering-Consulting-Design Materials Testing Consulting Subgrade Verification Asphalt Mix Verification Earth Work Control Batch Plant Observation ...
by:Evans Analytical Group® (EAG) based inSunnyvale, CALIFORNIA (USA)
Reliability qualification demonstrates the fitness of a microelectronic product for use in the field and helps our clients better understand the fundamental wear-out mechanisms, detect design marginality combined with parameter drift and determine failure rates due to latent manufacturing ...
Distributed by:Mi-Net Technology Ltd based inNottingham, UNITED KINGDOM
Our tribometer friction & wear testing service is offered in partnership with the Nanovea Europe lab. Using their range of high end and robust tribometers we are able to perform pin on disc wear testing at a variety of loads and environmental configurations. We can provide tests based on ASTM and ISO standards or we can design custom tests for your specific ...
Manufactured by:Craft Machine Works, Inc. based inHampton, VIRGINIA (USA)
With a dedicated, fully enclosed blast and paint facility, we tailor finishing to your needs and specifications with options of epoxy, urethane, alkyd enamels, coal tars and custom finishes. Our technicians perform blasting in accordance with Steel Structures Painting Council (SSPC) regulations, utilizing various blast media depending on the substrate material and specific customer ...
Manufactured by:FLEXcon Company, Inc based inSpencer, MASSACHUSETTS (USA)
Want to be sure your graphic will still look great after two years outdoors? We can conduct accelerated weather testing as well as a variety of other aging and exposure tests. ...
by:EcoMetrix Incorporated based inMississauga, ONTARIO (CANADA)
EcoMetrix has an in-house laboratory where geoscientists complete specialized testing of natural materials and waste products such as: Ore, overburden, waste rock, ...
Manufactured by:Particle Technology Limited based inHatton, UNITED KINGDOM
Particle Technology Ltd houses two of the largest commercial sand and dust testing facilities in Europe. The requirements of all of the major specifications for dust penetration and erosion by sand can be met for both 'swirling' and 'driving' conditions and we have a full Ingress Protection (IP) facility, with the capability of incorporating both dust and water tests. All the listed standards are ...
Manufactured by:Fiatec - Filter & Aerosol Technologie GmbH based inMainleus, GERMANY
Besides the evaluation of filtration performance we also run tests regarding basic material properties on media and elements. This includes climate change tests, ageing tests, shelf life, conditioning under extreme temperatures and humidity as well as several stability tests or fogging and odor ...
by:M&R Integrated Services Ltd based inEfferun Delta State, NIGERIA
Corrosion protection has always been very important for our company and we have a lot of knowledge within our organisation. We own a large fleet of equipment (see our equipment list) and are capable of handling large-scale ...
by:TÜV SÜD AG based inMunich, GERMANY
Why is Climatic Testing required? Technical devices and products are often exposed to climatic and mechanical stresses. They must work smoothly despite cold, heat, wetness and bad ...
Manufactured by:Don Whitley Scientific Limited based inBradford (West Yorkshire), UNITED KINGDOM
Don Whitley Scientific (DWS) offers documentation packages such as functional specification documentation, factory acceptance tests (FAT), site acceptance tests (SAT), installation documentation (IQ), operational qualification documentation (OQ), and periodic re-qualification ...