Refine by
Injectable Materials Services
36 services found
Manufactured by:Subtech GmbH based inGoch, GERMANY
Injection process for the repair of faulty joints in sewers. The CemConex mineral injection material consists of two components, which are individually mixed in suspension above ground, and then mixed together in the packer immediately prior to injection at the repair site. ...
Manufactured by:HAGMED based inRawa Mazowiecka, POLAND
In the scope of free processing capacity, we offer plastic processing services with the use of extrusion method and injecting method of such materials as: polystyrene, polypropylene polyvinyl chloride, polyamide, polyurethane, polycarbonate, PET, PEEK. This form of cooperation has been used for years by many known companies manufacturing their products for ...
by:Innovative Environmental Technologies, Inc. (IET) based inPipersville, PENNSYLVANIA (USA)
When a site is unsuitable for in-situ remedial material injection due to the high contamination present in the shallow, unsaturated zone, soil mixing can be employed to quickly reduce concentrations to below hazardous waste standards. The most common application of soil mixing is when soils are above the HAZ disposal limit and need to be reduced to minimize ...
Manufactured by:Schenck Process Holding GmbH based inDarmstadt, GERMANY
Pneumatic Injection SystemProducers across process industries are continually striving to accomplish high material injection rates and superior injection accuracy. Now, you can improve productivity rates and system reliability, availability and performance with Mac Process pneumatic injection ...
Manufactured by:Innorapid Limited based inZhongshan, CHINA
Injection molding is a manufacturing process for producing parts by injecting material into a mould. Injection moulding can be performed with a host of materials, including metals, elastomers, and most commonly thermoplastic and thermosetting polymers. Material for the part is fed into a heated ...
Manufactured by:BESTechnologies, Inc. based inSarasota, FLORIDA (USA)
Our Treatment Plant Automatic Dispensing System should be placed near the inlet to the treatment plant and the dosing material injected directly into the incoming wastewater stream. BESTech's highly effective bacteria consortium, when introduced into the wastewater stream (upstream as well as at the treatment facility), will substantually reduce (in most cases) ...
by:Kaysun Corporation based inManitowoc, WISCONSIN (USA)
The process most commonly involves using multi-barrel injection molding machines to inject several materials into the same tool during a single, automated operation. There is also an approach that uses multiple machines, one for molding the base component (or substrate) and another for applying a thin layer of thermoplastic elastomer (TPE) to the ...
Manufactured by:Shining World Health Care Co., Ltd. based inNew Taipei City, TAIWAN
Contract Manufacturing: Device assembly, Injection/Molding, Sterilization and Material ...
Manufactured by:Hayden Corporation based inWest Springfield, MASSACHUSETTS (USA)
The combustion process uses specially designed nozzles to accelerate the exhaust gases to supersonic velocities, much like a military fighter plane’s engine in afterburner. Powdered coating material is injected into the high velocity gas stream and is accelerated toward the target surface.The coating is deposited with substantial energy and exceptional ...
by:Envision Radiology based inColorado Springs, COLORADO (USA)
CT Intravenous Pyelogram (CT IVP or CT Urogram) is an exam that uses an injection of contrast material into the veins followed by Computed Tomography imaging to evaluate kidneys, ureters, and bladder. The exam helps to diagnose urinary tract disorders such as kidney stones, urinary tract obstruction, or cancer. Often symptoms for this procedure are, but not ...
by:Remington Technologies based inLoveland, COLORADO (USA)
Remington has spent a decade refining the injection of remedial materials, most notably, the injection of chemical oxidants for the remediation of petroleum and chlorinated solvents in soil and groundwater. From the early days of modified Fenton’s Reagent to the current extensive list of effective subsurface oxidizers, Remington has led the ...
by:Team Rapid Manufacturing China Limited based inZhongshan City,, CHINA
From a small clear cup to a clear lamp cover or even parts used in helicopter, we can find clean plastic molding parts easily in our life. Clear plastic molding is used widely in all walks of life. TEAM Rapid offers clear plastic molding services to help lots of customer to make their clear plastic parts successfully in the past 10 years. We have made different clear plastic parts such light ...
Manufactured by:Firstmold Manufacturing Limited based inZhongshan City, CHINA
The Two-Shot Molding Service, also known as dual-shot, double-shot, or multi-shot, is the simultaneous molding of two different plastic resins in a single machining cycle. The majority of people think that two-shot molding is more complex, time-consuming, and expensive as compared to other plastic molding processes. But when you choose FirstMold as your ultimate partner in plastic moldings, you ...
Manufactured by:GBSA, Inc. based inChardon, OHIO (USA)
GBSA technical and application design consultations are designed to help you become more competitive. Our consultations include: Selecting appropriate materials. Meeting pre-determined part requirements. Integrating various parts for optimal function. Optimizing for environment in which parts function. Managing ...
by:Ground Engineering Contractors Drilling & Grouting, Inc. based inKnoxville, TENNESSEE (USA)
Consolidation grouting is a general term for grouting that is carried out within rock masses with the intent of filling rock mass discontinuities. Depending on the intent and timing of the grouting, any of the following grouting techniques may be consolidation grouting: Pre-excavation grouting, post-excavation grouting, grout curtains, water cut-off ...
Manufactured by:Innorapid Limited based inZhongshan, CHINA
Thanks to the flexibility of the silicone, complex intermeshing geometries can be achieved without demoulding problems. The base material used for the reproductions is a liquid polyurethane resin which with the use of additives can simulate the properties of a wide variety of plastics. Between 15 and 30 parts can be produced depending on the requirements of the ...
Manufactured by:JasonMould Industrial Company Limited based inHuiZhou City, CHINA
In the 10+ years we have been involved with publications serving the plastics industry, the number of unique plants doing plastic injection molding has ranged from 10,000 to 14,000+ in the booming years in the China according to data collected from subscribers. Not saying that is the universe, but it’s likely reach to a high 90% of it. Currently, there are just over 11,000 plants doing ...
Manufactured by:Hayden Corporation based inWest Springfield, MASSACHUSETTS (USA)
All laser cladding operations by Hayden Corp. are fully automated, ensuring accurate and repeatable applications of the weld overlay. This ensures that the weld is deposited evenly and smoothly, with no gaps or voids. The result is a stronger, more consistent bond that can withstand high temperatures and extreme conditions. Hayden's laser cladding services are the perfect solution for those who ...
by:EnISSA - Enhanced In Situ Soil Analysis based inSteenokeerzeel, BELGIUM
Our team provides detailed EnISSA MIP investigations to the consulting community, problem owners or contracters in Europe. Every project benefits from a dedicated approach whith the necessary support for the further remediation ...
Manufactured by:Subtech GmbH based inGoch, GERMANY
Injection Process for Structural Lateral Connection Rehab. Janssen Process is the only no-dig remedy addressing the underlying cause of lateral connection failures: inadequate bedding and structural support. A two-component resin is robotically pressure-injected into the cavities around a lateral, creating bedding that permanently eliminates root intrusion, infiltration and voids. Cracks, shards ...