Refine by
Marpol Services
18 services found
Manufactured by:S-Keeper 7 CEMS - a brand by Tecnova HT srl based inPregnana Milanese, ITALY
S-Keeper 7™ is a Continuous Emissions Monitoring System CEMS Type Approved for marine application fully engineered, integrated and validated in accordance with applicable Directives. What about the Main Players regulating Marine Emissions e.g. from ships or also from off-shore units? The most important player is definitely the IMO International Maritime Organization. The IMO is the United ...
Manufactured by:Lamor Corporation Ab based inPorvoo, FINLAND
The establishment and provision of port waste management reception facilities is an integral part of any port authorities' compliance requirements, as governed by the International Convention for the Prevention of Pollution from Ships, 1973, MARPOL Convention. The key requirements are: The port authority shall ensure the availability of waste reception facilities adequate to meet ...
by:Drew Marine based inWaterbury, CONNECTICUT (USA)
Drew Marine offers cost-effective continuous-drip line samplers for onboard testing and fast analysis. Available in an array of sizes, our samplers are compliant with MARPOL 73/78 Annex VI — Regulation 18. ...
Manufactured by:CR Ocean Engineering LLC based inParsippany, NEW JERSEY (USA)
Our Marine Exhaust Gas Scrubbers meet our customer’s MARPOL compliance with state-of-the-art environmentally sound solutions, while offering maximum efficiency and design flexibility at the lowest possible costs. With over 60 years of proven experience, CR Engineers are ready to make all adaptations needed and provide on-going ...
by:A.Lanfranco & Associates Inc. based inSurrey, BRITISH COLUMBIA (CANADA)
Marine engine NOx certification surveys using IMO Marpol Annex VI protocols. International Dioxin/Furan/PCB emission surveys. Remote biomedical/refuse incinerator emission testing using Canada wide standard protocols for Dioxin and ...
Manufactured by:Explicit ApS based inVirum, DENMARK
We help monitor their compliance with environmental redulations. MARPOL Annex VI enforcement: Pioneering the field of maritime emissions monitoring, Explicit enables authorities to monitor compliance with MARPOL Annex VI regulations using airborne surveillance of individual ship emissions. The solution allows for effective enforcement of key environmental ...
Manufactured by:Environmental Protection Engineering S.A. - EPE S.A. based inPiraeus, GREECE
(EPE) collects and manages ship-generated solid waste and cargo residues, as described under Annexes I, II V & VI of the International Convention Marpol 73/78. Our experience in ship-generated waste management, along with the qualified and trained personnel, guarantee the quality of our services.Our company is fully licensed and implements the best environmental practices for ...
Manufactured by:S-Keeper 7 CEMS - a brand by Tecnova HT srl based inPregnana Milanese, ITALY
S-Keeper 7™ Type Approved continuous emissions monitoring system is in compliance with several applicable directive such us Marpol, NOx Technical Code, as already explained. This compliance is proven since the constrains and guidelines were strictly followed during engineering and construction but using the NOx analytical method: our engineering team chose the method that ...
Manufactured by:S-Keeper 7 CEMS - a brand by Tecnova HT srl based inPregnana Milanese, ITALY
The S-Keeper 7™ is in strict compliance with the MARPOL Directive requirements but its Mission is even more important. Since 1974 TECNOVA Group has delivered thousands of devices, such as meters, oil in water analysers, viscometers, shaft monitoring etc., to improve the management of cruising ships, cargoes, chemical tankers, RO-ROs,etc. ...
by:International Tanker Owners Pollution Federation Ltd (ITOPF) based inLondon, UNITED KINGDOM
ITOPF regularly advises governments and industry on the preparation of contingency plans and other matters related to marine pollution. These activities give us an opportunity to pass on messages of good practice outside the pressurised environment of a spill. They also maintain our exposure to governments, organisations and systems that we might be working with in the ...
Manufactured by:Ecoslops based inParis, FRANCE
First industrial unit to produce fuel and light bitumen from hydrocarbon residues. Ecoslops has built the world's first unit to produce fuel and light bitumen from wastes. It is located in Sinès, the first industrial port of Portugal located 150 km south of Lisbon, and operated by Ecoslops Portugal ...
by:AFECO (EcoGenR8 Limited) based inWaterlooville, UNITED KINGDOM
independent and impartial advice and support, tailored specifically for the needs of the Superyacht ...
by:Ekotoxikologicke Centrum Bratislava s.r.o. based inBratislava, SLOVAKIA
Safety Data Sheet document is not provided for the duration. The length of the safety data sheet corresponds to the hazard of the substance or mixture and the available information. All pages of safety data sheet including all attachments are numbered and either file contains the safety data sheet (for example, Page 1 of 3 ‘), or whether there is another party (for example, continued on ...
Manufactured by:Lamor Corporation Ab based inPorvoo, FINLAND
Lamor Services provide integrated hazardous and non-hazardous waste management services to a range of oil and gas and other industrial clients. We follow the key principles of: Waste recovery, reuse and recycling; Long term sustainable solutions; Utilizing best available ...
Manufactured by:S-Keeper 7 CEMS - a brand by Tecnova HT srl based inPregnana Milanese, ITALY
MRV is the acronym of Monitoring, Reporting & Verification and it became popular when the “Regulation (EU) 2015/757 of the European Parliament on the Monitoring, Reporting and Verification of Carbon Dioxide emissions from maritime transport” came into force last 1st July 2015. ...
by:Intecsa-Inarsa based inMadrid, SPAIN
INTECSA-INARSA´s Industrial facilities area is dedicated to providing engineering services in all types of industrial plants, from conceptual engineering to construction and start-up. Its main references are in biofuel projects, hydrocarbon-polluted water treatment, high and low electrical facilities, voltage power generation and distribution and other industrial plants such as ...
by:Urbaser SA based inMadrid, SPAIN
The Works and Conservation Division specialises in designing, planning and constructing all types of works and infrastructures of an environmental nature and in waste management; they have more than 20 years’ experience in the sector.The wide range of activities ranges from urban and industrial waste removal and/or assessment, landscape restoration, parks and gardens, soil decontamination ...
Manufactured by:Céramiques Techniques Industrielles (CTI) based inSalindres, FRANCE
Purify, recycle, refine: a whole technology at the service of your processes. For more than 20 years, CTI has been constantly expanding its expertise to design and supply increasingly high-performing ceramic Filtration membrane for processing and recycling aqueous complexes, in increasingly demanding ...