Refine by
Microscopy Sem Services
39 services found
by:MPL Health Safety Environment based inAUSTRALIA
MPL Laboratories is NATA accredited to identify asbestos fibres in bulk samples using Polarised Light Microscopy (PLM). Three types of asbestos commonly used in manufacturing are chrysotile, amosite and crocidilite. These can be detected by PLM. Fibres which cannot be identified by PLM can be confirmed by Scanning Electron Microscopy (SEM). ...
Manufactured by:LVD Biotech based inSant Vicenç dels Horts, SPAIN
High-Performance Liquid Chromatography (HPLC), Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), Fast Fourier Transform Infrared Spectroscopy (FTIR), Bel Permeation Chromatography (GPC), Gas Chromatography (GC), Microscopy, SEM, Q-Six, ...
by:Particle Vision GmbH based inFribourg, SWITZERLAND
Question orientated analyses are the key for success. Light microscopy for the determination of morphological parameters of single particles >2.5 µm in diameter. Scanning electron microscopy (SEM) for the determination of morphological parameters of single particles >20 nm in diameter. STEM detector for the determination of morphology ...
by:Adirondack Environmental Services Inc. based inAlbany, NEW YORK (USA)
Such explorations are possible only because of the experience of our people and the breadth and sophistication of our laboratory equipment, which includes: Powerful microscopy capabilities including Optical Microscopy: PLM and PCM and Macrophotography. Electron microscopy: SEM with EDXRF, TEM with EDXRF and SAED. Digital imaging ...
by:Materials Analytical Services, LLC (MAS) based inSuwanee, GEORGIA (US) (USA)
MAS routinely analyzes traceable metals in a variety of substrates as well as performs impurity analyses in product formulations and excipients using ICP-OES and ICP-MS. Particulates analysis can also be performed by optical, scanning and transmission electron microscopy (SEM, ...
Manufactured by:SEMTech Solutions, Inc. (STS) based inNorth Billerica, MASSACHUSETTS (USA)
SEMTech Solutions PM Procedure is designed to include important checks and action-items that enhance performance and keep the SEM operating at peak levels. Our PMs consist of (3) major ...
by:RJ Lee Group, Inc. based inMonroeville, PENNSYLVANIA (USA)
CCSEM combines a scanning electron microscope (SEM), x-ray analyzer (EDS) and digital scan generator controlled by intelligent software. Using this technique, large numbers of individual particles can be located, sized and characterized quickly, i.e., seconds per particle. These particles can then be grouped into particle type (species) classes based on their elemental composition and ...
Manufactured by:Sono-Tek Corporation based inMilton, NEW YORK (USA)
In early 2017, we began to offer in-house ultrasonic coating services for customers in our Milton, NY laboratory. Sono-Tek’s in-house coating services generally fall under one of the following two categories, Engineered Coating Services and Contract ...
by:RJ Lee Group, Inc. based inMonroeville, PENNSYLVANIA (USA)
Developed by RJ Lee Group, computer-controlled scanning electron microscopy for the identification of gunshot residue (GSR) particles is now widely accepted in the courts. This automated analysis allows us to provide accurate and reliable data along with exceptional turnaround time. Not only are we experts in analyzing GSR, but we are also capable of studying GSR plume ...
by:Particle Vision GmbH based inFribourg, SWITZERLAND
Single particle analysis is a general term for analytical methods that deal with the analysis of single dust particles and not total dust. The advantage of these methods is that chemical and morphological criteria can be combined. And the information obtained for each single particle contributes to the characterization of the total ...
Manufactured by:SEMTech Solutions, Inc. (STS) based inNorth Billerica, MASSACHUSETTS (USA)
Over the last 20 years, SEMTech Solutions has established itself as a trustworthy and reliable SEM service organization. ...
Manufactured by:Norman Noble, Inc. based inHighland Hts., OHIO (USA)
Engineering and testing services are essential to product development, product refinement, manufacturability, verification testing and FDA ...
by:Evans Analytical Group® (EAG) based inSunnyvale, CALIFORNIA (USA)
The Microscopy group includes staff and equipment to perform FESEM (Field Emission Scanning Electron Microscopy), which is used for surface structural and cross-sectional analysis. EDX (Energy Dispersive X-Ray Spectroscopy) is used to perform Elemental materials analysis, both qualitative and quantitative. FETEM (Field Emission Transmission Electron Microscopy) is used to perform microanalysis ...
by:Laboratory Testing Inc. based inHatfield, PENNSYLVANIA (USA)
Energy Dispersive X-ray Spectroscopy (EDS), also known as EDS Analysis, is a qualitative and semi-quantitative X-ray microanalytical technique that can provide information about the elemental composition of a sample. The information generated by Energy Dispersive X-ray Spectroscopy also can be helpful in identifying coatings, and in some cases, foreign inorganic substances present in a ...
Manufactured by:SEMTech Solutions, Inc. (STS) based inNorth Billerica, MASSACHUSETTS (USA)
Our Field Emission Scanning Electron Microscope Systems are equipped with Energy Dispersive X-ray Spectroscopy capabilities. Our Microanalytical techniques can provide solutions to your most challenging ...
by:Industrial Testing Laboratory Services LLC based inPittsburgh, PENNSYLVANIA (USA)
The ability to service our customers when providing chemical analysis services, occurs from a number of important directions: In-House capabilities - For most applications, we have the capabilities of processing your alloys in-house. If presented a solid piece we can normally use our glow discharge, Optical Emission Spectrometer, to perform most of the analysis required. For certain elements, ...
by:Glass Technology Services, (GTS) based inChapeltown, UNITED KINGDOM
Glass failure and fracture analysis is a powerful tool combining the techniques of fractography and microscopy that allow the root cause of a glass breakage or glass product failure to be determined. Services include both the investigation of items that have already failed as well as quality assessment and physical and mechanical performance testing services to ensure proper due-diligence before ...
by:Bureau Veritas North America, Inc. based inNew York, NEW YORK (USA)
Bureau Veritas offers mineralogical analysis relating to acid rock drainage (ARD) using optical microscopy on polished thin sections, X-ray diffraction (XRD) and scanning electron microscope (SEM) methods. Identification of minerals present, grain size, grain boundaries and relative abundance can be determined. The Rietveld XRD Method is also offered, allowing ...
by:NSL Analytical Services, Inc. based inCleveland, OHIO (USA)
NSL's Metallurgical labs and material testing laboratory offer a full complement of instruments and services to tackle some of your toughest materials characterization and mechanical testing ...
Manufactured by:Newcells Biotech Limited based inNewcastle Upon Tyne, UNITED KINGDOM
Accelerated in vitro evaluation of retinal toxicity. Newcells offers a fast and reliable retinal drug toxicity in vitro testing service using complex models developed in house: retinal organoids and RPE. The retinal toxicity service evaluates how new compounds affect cell viability, following photoreceptor degeneration or loss of RPE barrier function including outer segment photoreceptor ...