Refine by
Pcb Contaminated Services
28 services found
by:Enviro-Vac Corp. based in, BRITISH COLUMBIA (CANADA)
Recent EPA findings conclude, many industrial coatings and buildings, including schools, built and or renovated in the 1950s through the 1970s have caulking that contains PCBs. The caulk was used to seal gaps to make windows, door frames, masonry and joints in buildings and other structures watertight or airtight. Enviro-Vac has the capabilities and experience to remove and dispose of any ...
by:Orion B.V. based inDrachten, NETHERLANDS
An independent laboratory analyses all decontaminated metals that leave our facility. Thus we will be certain that the original PCB-contamination has been removed before recycling the metals. Orion has a longstanding cooperation with leading Dutch metal merchants who will process the metals at reputable ...
by:Orion B.V. based inDrachten, NETHERLANDS
Apart from metal and oil transformers and capacitors also contain ceramic, wood and paper. PCB contamination is not only found in equipment, but also in soil, roads and buildings. This is mostly caused by leakage. The process developed by Orion is suitable for cleaning all nonporous materials. To clean porous materials Orion cooperates with West European ...
by:Sanexen based inBrossard, QUEBEC (CANADA)
Sanexen developed its proprietary PCBD process for the decontamination and regeneration of PCB-contaminated mineral oils. The ability of this mobile process to perform in situ decontamination on either de-energized or energized transformers represents a significant asset. Ultrasorption is another of Sanexen’s proprietary technologies used in the treatment ...
by:Active Environmental Technologies, Inc. based inMt. Holly, NEW JERSEY (USA)
Confined Space Entry & Cleaning. Waste Disposal. PCB Contaminant Remediation. Sludge Removal & ...
by:Sanexen based inBrossard, QUEBEC (CANADA)
Sanexen performs a range of handling services, from simple site characterization to decommissioning of sites and PCB-contaminated materials. Throughout the years, the company has developed expertise in specific cases including the dismantling of ASKAREL-type transformers. Sanexen has all the necessary certifications and permits required for performing this type ...
by:Orion B.V. based inDrachten, NETHERLANDS
Orion separates the collected oil by contamination level. Tthat way, it is possible to choose the best available technique for the destruction of the oil. Oil with low or average PCB contamination will be processed by incineration at incineration plants specialised in hazardous waste. Energy produced in this process will be used to generate ...
by:Solva-Rec Environnement Inc. based inSt-Jean-sur-Richelieu, QUEBEC (CANADA)
Solva-Rec collects, transports, analyses, samptes, segregates, treats, and recycles hazardous waste and offers comprehensive services for PCB-contaminated products. Solva-Rec also offers complete management services as an independent negotiator with other treatment and/or elimination centres for large volumes. Sofoa-Rec offers innovative soluoons to reduce waste ...
Manufactured by:Enviro-USA American Manufacturer, LLC a division of GEI works. based inPalm Bay, FLORIDA (USA)
Enviro-USA now offers: Consulting, Designing, Drawing up Plans and Supervising Installations, for turbidity curtain and oil spill containment projects, including civil engineering & marine construction projects that require silt, sediment, PCB or contaminants contained before or during a marine construction project. Regardless of the size of your project or ...
by:Total Environmental Concepts, Inc. (TEC) based inGaithersburg, MARYLAND (USA)
Phase I and Phase II Property Environmental Assessments. Property Assessments: Asbestos, Lead, Underground Storage Tanks (UST), Mold, Radon, Water Quality. PCB Contamination. Hazardous Waste Sites. Petroleum-contaminated Sites. Multi-Media Sampling. Remedial Action Plans (RCRA, TSCA, UST and CERCLA sites). Waste Minimization/Pollution Prevention. ...
by:Adirondack Environmental Services Inc. based inAlbany, NEW YORK (USA)
The field services team at Adirondack Environmental Services, Inc. manages waste stream sampling to ensure laboratory analysis provides accurate compliance data for local, state, and federal agency requirements. All Adirondack Field Services experts are fully trained to work with volatile and nonvolatile contaminants, including PCBs, pesticides, metals and ...
by:USA Environment, LP based inHouston, TEXAS (USA)
USA's expertise in these areas can maximize your investment recovery opportunities and greatly off-set the demolition cost for a project. In addition, we have a variety of techniques for the removal of surficial contamination including heavy metals, PCBs, pesticides and other contaminants from the affected surfaces; thereby allowing the ...
by:Tri-Phase Group (TPG) based inMississauga, ONTARIO (CANADA)
Groundwater Treatment; Tri-Phase brings years of combined experience in the implementation, operation and maintenance of both in-situ and ex-situ groundwater remediation systems. In addition to our Ministry of Environment Certificate of Approval for the handling of PCB waste, we also carry a certificate for our mobile water treatment systems. Furthermore, we construct, operate ...
by:Environment International LTD based inSeattle, WASHINGTON (USA)
EI prides itself on helping clients achieve cost-effective response actions under CERCLA and state hazardous waste laws. EI has provided advice on all phases of response actions -- preliminary assessment, remedial investigation and risk assessment, feasibility study, and remedy selection and ...
by:QM Environmental (QM L.P.) based inKamloops, BRITISH COLUMBIA (CANADA)
For years, PCBs or polychlorinated biphenyls were used extensively in a wide range of industrial applications, including sealants, caulking compounds and paint adhesives. In particular, PCBs were widely used as coolants and lubricants in electrical transformers, capacitors and lamp ...
by:Trédi international / Séché Environnement based inPARIS, FRANCE
In order to offer its clients a full range of services, Séché Environnement has a number of solutions for transporting waste. Séché Transports, one of the company's subsidiaries, is OHSAS 18001 certified and is equipped to handle any type of residue, whether packaged on in bulk, liquid or solid, or in large or small ...
by:HM Environmental Services, Inc. based inMt. Clemens, MICHIGAN (USA)
HM Environmental Services, Inc. has extensive experience in environmental remediation. All of our staff is trained in proper excavation procedures along with 40 hour OSHA HAZWOPPER training. Our services encompass excavation and removal of impacted soils, removal of ASTs and USTs, site cleanups, demolition, and installation of insitu remediation systems. We have the proper equipment to manage ...
by:Eastern Environmental Technologies, Inc based inPort Chester, NEW YORK (USA)
Before EPA banned the manufacture of PCB's in 1978, PCBs were used in the manufacturing of fluorescent light ballasts. The use of PCB's in ballasts manufactured prior to 1978 was not regulated by the EPA. All light ballasts manufactured since 1978 which do not contain PCBs should be marked by the manufacturer with the statement 'No PCB's'. For those manufactured prior to that time , or for those ...
by:Qikiqtaaluk Environmental Inc.(QE) based inBrossard, QUEBEC (CANADA)
QE offers integrated hazardous waste management services that draw from its experience in the north as well as its partner's expertise and 25 years experience in the management of PCB and other hazardous ...
by:Brendar Environmental Inc. based inKingston, ONTARIO (CANADA)
In addition to regular waste management services there is an assortment of accessory services that a firm may require from time to time. Brendar offers a host of accessory services that have been developed from our experience in past projects. We have the flexibility to adjust our programs to help you manage ...