Refine by
Penetrometer Services
31 services found
by:A F Howland Associates based inNorwich, UNITED KINGDOM
The California Bearing Ratio (CBR) test is a penetration test developed by the California State Highway Department and is used to determine the mechanical strength of a soil. The test can be carried out on site or in the laboratory. The VBR test is carried out using a cylindrical plunger which penetrates the soil at a given rate. The relationship between the force and penetration can then be used ...
by:Listers Geo based inTowcester, UNITED KINGDOM
Triaxial. Shear Vane. Hand ...
by:Lankelma Limited based inIden, UNITED KINGDOM
Cone penetration testing (CPT) is an in-situ test whereby a cone penetrometer mounted to a series of steel rods is vertically pushed into the ground. Hydraulic rams on our CPT rigs push the cone penetrometer at a constant rate of 20 mm per second to depths of up to 100 ...
Manufactured by:Humboldt Mfg. Co. based inElgin, ILLINOIS (USA)
At our Elgin, IL facility, Humboldt provides dependable and economical calibration and repair services for the following Humboldt or competitors‘ devices: Concrete Air Meters, Rebound (Schmidt) Hammers, Load Cells, Load Rings, LSCTs, Beam Breakers, Penetrometers, Speedy Moisture ...
by:Materials Testing Consultants (MTC) based in, MICHIGAN (USA)
Menard Pressuremeter (MPT) Cone Penetrometer (CPT) Vane Shear Testing (VST) Standard Penetration Testing (SPT) Slope Inclinometer Diamond Core Drilling Permeability Testing Environmental Soil Probe Earth Resistivity Testing US COE Field CBR ...
Manufactured by:Vertek a Division of ARA based inRandolph, VERMONT (USA)
Vertek is currently one of the largest manufacturers of cone penetrometer equipment, as well as a supplier of in-situ environmental testing equipment for soil, soil gas, soil water sampling and monitoring, and related delivery and support vehicles. Over the past 20 years we have sold over 200 systems for onshore and offshore applications in both the domestic and international ...
by:3TM Consulting, LLC based inHouston, TEXAS (USA)
Conventional Field Methods: 3TM Consulting, LLC has extensive experience in subsurface site characterization and the remediation of contaminated soil and groundwater. We have used manual samplers, conventional drilling rigs, and direct push technology (such as Cone Penetrometer Testing and Geoprobe) to sample soils and groundwater. The photograph to the right shows direct push ...
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Mechanical repair and maintenance services are very important to keep geotechnical equipment operating at peak performance. Gouda Geo-Equipment specializes in both routine and advanced mechanical maintenance, focusing on restoring machinery to optimal working order and ensuring it operates safely and efficiently. By preventing breakdowns and minimizing unnecessary repairs, our mechanical repair ...
by:BRD Environmental Ltd based inBanbury, UNITED KINGDOM
BRD investigation comments on appropriate design California Bearing Ratio (CBR) for design of pavement foundations based on laboratory testing or insitu testing as appropriate. In more difficult ground conditions, BRD can advise on ground improvement by dynamic compaction, pavement foundation reinforced with geo-grids or other techniques to ensure a cost effective road ...
Manufactured by:APAGEO based inMagny Les Hameaux, FRANCE
Rental is possible throughout France and the French overseas departments and territories (collection of the equipment from our premises or dispatch by express or courier service) and can be for a short or long period of time (application of degressive rates). The amount of the deposit will be fixed according to the equipment rented. It will not be cashed and will be returned on payment of the ...
by:SafeLane Global based inPhocle Green, UNITED KINGDOM
On construction sites where a desktop or non-intrusive survey has identified a risk of deep buried unexploded bombs (UXBs), and where piled foundations are planned, intrusive surveys can enable clearance ahead of piling and boreholes. An intrusive survey also enables exploration at depths not achievable by non-intrusive methods, and on land unsuitable for non-intrusive methods such as surface ...
by:Ital Sonda Srl based inSant` Agata Li Battiati (CT), ITALY
The program of soil inestigation must be suitable to the size of the problem and the nature of the terrain, with a weighted compromise between technical and economic requirements With the growing importance and the sensitivity of to achieve, and increasing the complexity of the geotechnical problem you justify investigations increasingly accurate. The impact on total spending is small when ...
by:Carlson Testing Inc based inTigard, OREGON (USA)
Carlson Testing, Inc. provides complete geotechnical field services for all types of projects. In addition, our A2LA (American Association for Laboratory Accreditation) Laboratory can provide the laboratory testing needed for any project. And we have provided field and laboratory testing to meet our clients' needs for almost 25 years. Our staff includes a wide range of experienced professional ...
by:Carlson Testing Inc based inTigard, OREGON (USA)
Carlson Testing, Inc. provides complete laboratory services for all types of earthwork projects. Our laboratory and field staff hold multiple certifications including CDT, CagT, CEBT and Radiation Safety. Carlson Testing has successfully completed projects including earthen dams, airports, highways, complex multi-level building, commercial construction and residential ...
by:ACS Environmental Testing Ltd. based inPoole, UNITED KINGDOM
In the field of civil engineering, nearly all projects are built onto, or into, the ground. Unlike other materials, which are subjected to strict controls during manufacture or processing, soil is usually used in the natural condition. Whether the project is a structure, a roadway, a tunnel, or a bridge, the properties of the soil at that location are of great importance to the civil ...
by:Converse Consultants based inMonrovia, CALIFORNIA (USA)
Most construction projects require a geotechnical study, commonly referred to as a “soils report”. The purpose of the study is to identify the geological features and hazards of the site and to determine the engineering properties of the earth materials. A geotechnical study begins with a review of geological maps and reports to determine the geological setting of the site and to ...
by:Particle Technology Labs based inDowners Grove, ILLINOIS (USA)
Mercury porosimetry is a powerful technique utilized for the evaluation of porosity, pore size distribution, and pore volume (among others) to characterize a wide variety of solid and powder materials. The instrument, known as a porosimeter, employs a pressurized chamber to force mercury to intrude into the voids in a porous substrate. As pressure is applied, mercury fills the larger pores first. ...
by:Ecologia based inSittingbourne, UNITED KINGDOM
Ecologia are pleased to offer our clients a comprehensive range of in-situ geotechnical testing and field sampling techniques, conducted using our fleet of in-house drilling rigs and ancillary equipment. We understand that good data and quality samples are essential in the production of an accurate site model. All of our drilling staff are trained in the correct application of testing and ...
by:Aqua Survey, Inc. based inFlemington, NEW JERSEY (USA)
Aqua Survey collects proposed dredged material, processes the sediment samples, and preserves them for analyses. Our scientists regularly perform geotechnical, chemical and biological analyses in support of water quality and disposal alternatives studies. Aqua Survey will help clients prepare a sampling and analysis plan to submit for regulatory ...
by:SGS based inGeneva 1, SWITZERLAND
For accurate and sound site plans, SGS cone penetration testing services can determine your site strength and resilience. Talk to our qualified team ...