Refine by
Transmission Electron Microscopy Services
35 services found
by:SGS M-SCAN Ltd based inWokingham, UNITED KINGDOM
Transmission electron microscopy services from SGS – helping you detect and quantify virus particles throughout the biopharmaceutical and vaccine manufacturing process. During the manufacturing process, you need to ensure that your vaccine and biopharmaceuticals are free from virus particles. Our transmission ...
by:Evans Analytical Group® (EAG) based inSunnyvale, CALIFORNIA (USA)
The Microscopy group includes staff and equipment to perform FESEM (Field Emission Scanning Electron Microscopy), which is used for surface structural and cross-sectional analysis. EDX (Energy Dispersive X-Ray Spectroscopy) is used to perform Elemental materials analysis, both qualitative and quantitative. FETEM (Field Emission ...
by:Bureau Veritas North America, Inc. based inNew York, NEW YORK (USA)
Bureau Veritas routinely analyzes air samples for asbestos fiber counts using NIOSH methods for phase contrast microscopy (PCM) and transmission electron microscopy (TEM). AHERA, Yamate, and ISO air sample analyses by TEM are also ...
by:STAT Analysis Corporation based inChicago, ILLINOIS (USA)
Bulk Sample Analysis of Building Materials by Polarized Light Microscopy (PLM). Air Filter Analysis for Fiber Concentration by Phase Contrast Microscopy (PCM). Air Filter, Bulk Material and Water Analysis by Transmission Electron Microscopy (TEM). OSHA PEL Compliance by TEM. Point Counting for NESHAP Compliance ...
by:JRM Environmental, Inc. based inScottsdale, ARIZONA (USA)
Generally, air monitoring is performed in conjunction with providing asbestos abetment oversight. Analysis of air samples, either by Phase Contrast Microscopy (PCM) or Transmission Electron Microscopy (TEM), is necessary to provide an indication of how many fibers are contained in the air prior to starting a project, during the ...
by:MtoZ Biolabs based in, MASSACHUSETTS (USA)
Microcrystal electron diffraction (MicroED) is a novel technique that uses cryo-transmission electron microscopy (Cryo-TEM) for the three-dimensional (3D) reconstruction of organic small molecules and biological macromolecule crystals based on electron diffraction data. As an emerging technology, MicroED employs ...
by:Fibrecount NV - part of Shield Group based inRotterdam, NETHERLANDS
Our laboratories test asbestos in soil, bulk, dust, water and air samples for the presence of asbestos fibres. We analyse those samples with various technologies: light microscopy, polarization microscopy, Scanning Electron Microscopy and Transmission Electron ...
by:Bureau Veritas North America, Inc. based inNew York, NEW YORK (USA)
We routinely analyze bulks, drinking water, dust, soil and vermiculite samples. Bulk samples for asbestos are analyzed by Polarized Light Microscopy (PLM) and Transmission Electron Microscopy (TEM), asbestos in drinking water by TEM - EPA 100.2 and TEM - EPA 100.1 (wastewater/groundwater) and asbestos in dust using ASTM methods ...
by:Materials Analytical Services, LLC (MAS) based inSuwanee, GEORGIA (US) (USA)
MAS routinely analyzes traceable metals in a variety of substrates as well as performs impurity analyses in product formulations and excipients using ICP-OES and ICP-MS. Particulates analysis can also be performed by optical, scanning and transmission electron microscopy (SEM, ...
by:SanAir Technologies Laboratory, Inc. based inPowhatan, VIRGINIA (USA)
Asbestos under a microscopeSanAir is a full-service laboratory offering asbestos analysis in Phase Contrast Microscopy (PCM), Polarized Light Microscopy (PLM), and Transmission Electron Microscopy (TEM). Our state-of-the-art Asbestos Laboratory provides quality analytical results with rapid turn around times ...
by:Materials Testing Consultants (MTC) based in, MICHIGAN (USA)
Hazardous Materials Abatement Design Specialized Training Programs On-Site Air Quality Monitoring Lead, Mold, Asbestos Surveys & Sampling Clearance Testing Replacement Material Design Operations and Maintenance Programs Project Management Phase Contrast Microscopy Transmission Electron Microscopy Stereoscopic Evaluations On-Site ...
by:SanAir Technologies Laboratory, Inc. based inPowhatan, VIRGINIA (USA)
SanAir provides a full range of Transmission and Scanning Electron Microscopy services with fast response time for your required needs. SanAir"s facility includes the finest electron optics and preparation equipment providing you with the highest quality. Only the most recent and accepted protocols are followed, insuring you of ...
by:Particle Vision GmbH based inFribourg, SWITZERLAND
Single particle analysis is a general term for analytical methods that deal with the analysis of single dust particles and not total dust. The advantage of these methods is that chemical and morphological criteria can be combined. And the information obtained for each single particle contributes to the characterization of the total ...
Manufactured by:CD Bioparticles based inShirley, NEW YORK (USA)
In the development of liposome related drug carriers, the characterization of lamellarity is of the same essential importance as size analysis. CD Bioparticles offers custom services to measure the lamellarity of liposomes in different sizes using advanced microscopic ...
by:Paradigm Environmental Services, Inc. based inRochester, NEW YORK (USA)
Paradigm has highly qualified analysts in multiple lab locations, with an array of dedicated Polarized Light Microscopes (PLM) and Transmission Electron Microscopes (TEM). With our ELAP and NVLAP certifications we are prepared to address your requirements for any size project in any facility type. Our laboratories operate on multiple shifts and on weekends, to ensure your turnaround needs are ...
Manufactured by:Matexcel based inShirley, NEW YORK (USA)
Morphology analysis includes qualitative and quantitative analysis of a sample, which is crucial for many research studies. With the development of micro/nanofabrication techniques, micro- and nanostructures provides a unique way of controlling biomolecule-surface interactions. It has been shown that surface feature and roughness strongly affect protein adsorption on designated biomaterials ...
Manufactured by:Catalent, Inc based inSomerset, NEW JERSEY (USA)
Drug product development can be a daunting and expensive process. Biotech companies face many hurdles along the way, including the development and optimization of a scalable, commercially viable formulation while ensuring safety and efficacy of the final drug product. In order to receive regulatory approval, the manufacturing process and validation methods used to evaluate the drug product ...
Manufactured by:Mitsubishi Chemical Europe GmbH based inTokyo, JAPAN
The core of our technology is centered on analysis and evaluation of a wide range of polymer materials, from general-purpose resins to engineering plastics. We, as professional analytics specialists, support sincerely customers by performing various types of polymer analysis based on wealth of experience (separation analysis using various forms of chromatography, analytics using spectroscopic ...
by:Ellis Environmental Management, Inc. based inRancho Palos Verdes, CALIFORNIA (USA)
Ellis is southern California's leader in asbestos-related testing and management services. In California, activities that identify and/or disturb asbestos are regulated under 40 CFR Part 763 (AHERA), Cal-OSHA Section 1529 and the Air Quality Management District (AQMD) Rule 1403. Ellis maintains a staff of Cal-OSHA certified asbestos consultants (CAC) and certified site surveillance technicians ...
by:Scientific Analytical Institute based inGreensboro, NORTH CAROLINA (USA)
SAI’s state of the art Asbestos Laboratory provides quality analytical results with turnaround times as rapid as 90 minutes for PLM samples and 3 hours for TEM samples. In order to provide the most accurate results, SAI has selected the best available scientific equipment for our ...