Refine by
Waste Composition Services
33 services found
by:Gershman, Brickner & Bratton, Inc. (GBB) based inFairfax, VIRGINIA (USA)
Through waste characterization studies, GBB provides clients with information regarding the quantity and composition of municipal and industrial waste streams; the potential for extracting recyclables; the quantities of processible vs. non-processible wastes; chemical analysis and heating values; portions of the ...
Manufactured by:Green Eco Technologies based inVictoria, AUSTRALIA
The diagnostic capability of the system enable Green Eco Technologies to keep a watchful eye on your WasteMaster, stay in touch with your facility and perform testing and ‘recipe’ changes depending on your individual waste ...
Manufactured by:Composite Recycling based inEcublens, SWITZERLAND
Bringing circularity to composite waste; Thermolysis is a technique in which heat is applied in an oxygen-free environment to separate the fibres from the resin found in fibre-reinforced plastics (FRP). At Composite Recycling we recycle FRP waste with a proprietary static thermolysis process and post-treatment, which together ...
by:Resource Futures based inBristol, UNITED KINGDOM
Looking at single or multiple material streams produced as waste, we undertake full compositional analysis and volume assessment to understand what is being produced and where. We then model the data to produce forecast of likely arisings to guide clients in their resource and waste management ...
by:Valpak Limited based inStratford-upon-Avon, UNITED KINGDOM
A Zero Waste Audit will identify your current waste arisings, composition, recycling levels and ...
Manufactured by:MRW Technologies, Inc. based inGlenpool, OKLAHOMA (USA)
MRW maintains an inventory of numerous rental flares, rental thermal oxidizers, and portable vapor combustion units (VCUs). These systems are available for a wide range of flow rates and waste gas compositions and are delivered with complete control and ignition systems. As with all of MRW’s products and services; safety, durability, and quality are ...
by:SmartEnds based inGent, BELGIUM
SmartEnds offers innovative waste audit solutions that integrate AI technology to transform traditional waste management into a data-driven approach. Utilizing their VisnLine system, waste audits now incorporate real-time analysis of waste composition by linking visual data with metrics on weight and volume, ...
by:R.J. Burnside & Associates Limited based inOrangeville, ONTARIO (CANADA)
Burnside's team of highly qualified solid waste professionals provides clients with a wide range of skills for their solid waste management needs. Our team provides complete services for planning, waste composition and quantification, waste reduction, reuse and recycling strategies, economic evaluation, site ...
Manufactured by:Eggersmann GmbH based inWardenburg, GERMANY
Mixed or pre-sorted industrial and commercial waste contains raw materials that can be recovered by means of mechanical processing. Mechanical recycling equipment supplied by Eggersmann separates recyclable waste by composition and particle size to deliver the recovered raw materials in a particularly effective and efficient way, in accordance ...
Manufactured by:Fairmat based inParis, FRANCE
Fairmat specializes in innovative robotic solutions designed for recycling and manufacturing using carbon composites. With advanced technology, Fairmat transforms reclaimed carbon composites into high-tech materials through a pioneering recycling process. The company's factory in France is equipped with robotic systems that mechanically process carbon ...
Manufactured by:Felema GmbH based inStäfa, SWITZERLAND
Even two identical wastewater treatment plants sometimes show considerable differences depending on the catchment area, usage patterns and season. Pollution load, waste water composition, pH-values, COD/BOD etc. generate a multitude of variables. The ideal plant design, mode of operation and auxiliary products used in wastewater treatment therefore require ...
by:Normec OWS based inGent, BELGIUM
Normec OWS’s services also include performing administrative and technical audits on waste streams, treatment processes, and installations. The main purpose of these activities is to give precise insight into the actual composition of waste streams. This is done to verify the amount of waste, for example, or to determine ...
by:Envac AB based inStockholm, SWEDEN
Our set of tuning and control services covers activities on the “as-built” system to maintain performance at or above design levels. Tuning and control is normally performed when the system is commissioned and should be repeated when changes have been made, such as adding valves and moving ...
Manufactured by:Samsco Corporation based inCleveland, OHIO (USA)
The main objective of this evaluation is to provide Samsco and our clients a comfort level that the applications are appropriate and that the installation will be successful. There are certainly waste streams that are not appropriate for evaporation and it is better to learn this in the lab, rather than at the ...
by:Ricardo-AEA Ltd based inLondon, UNITED KINGDOM
With the increasing cost of raw materials and the more stringent controls and increased costs associated with waste management, it is essential that all businesses get the best value from their suppliers and contractors. By reviewing your waste streams (through composition and characterisation studies), supply chains and waste ...
by:Axion Group based inHanwell, UNITED KINGDOM
Due Diligence Plus is Axion’s service for investors in technology-based resource recovery business plans. Axion can provide technical, operational, market and commercial Due Diligence Plus advice to support investment decisions in new plants or process expansions. We work primarily in the waste recovery sector, offering advice on process design, technology and equipment selection, operating ...
by:Lawrence Recycling & Waste Management based inKidderminster, UNITED KINGDOM
To help your organisation minimise waste and maximise cost savings, site waste management audits are ideal for gaining a full understanding of the current situation, waste volume and type. From the information gathered, Lawrence can then plan the most efficient way of separating, collecting and processing all of your waste. Tailored to suit you and your organisation, rest assured that your ...
Manufactured by:Jaipur Robotics based inManno, SWITZERLAND
Ensuring stable combustion is critical for the efficient operation of any Waste-to-Energy plant. Achieving this stability requires optimal mixing of waste materials within the bunker to maintain consistent calorific values, reduce emissions, and optimize energy ...
by:EnviVice based inLage Mierde, NETHERLANDS
With the aid of a BAT investigation it is investigated whether it is shown that an applied situation can be licensed. BAT stands for the legal concept of Best Available Techniques. According to legislation a company always needs to apply a BAT at the applying of a license. For air and odour emissions, this means practically, the making of reasoned choices between a large number of (technical) ...
by:Inutec based inDorchester, UNITED KINGDOM
Tradebe Inutec has, over a period of many years, been the main contractor to a number of the UK’s principal nuclear organisations for the development of formulations for cementation of Intermediate Level Wastes arising from fuel reprocessing and power station operations. This includes materials such as fuel element debris, ion exchange resins, borated wastes and effluent treatment plant ...