Refine by
Wastewater Membrane Services
18 services found
Manufactured by:Jäger Umwelt-Technik GmbH based inHannover, GERMANY
To prevent the membranes from fouling it is strongly recommended to clean the membranes periodically. The most common techniques are: Running the diffusers with the maximum overload airflow (air bumping) for a short period of time. Inject formic acid into the airflow. Flush the whole system with acid or alkaline solution. Dewater the tank and blow off the fouling with an high-pressure water ...
Manufactured by:Jäger Umwelt-Technik GmbH based inHannover, GERMANY
Often routine maintenance or cleaning can reduce the membrane pressure, providing additional economic life. If no improvement in pressure is obtained after cleaning or maintenance, the economics of replacement should be ...
Manufactured by:Jäger Umwelt-Technik GmbH based inHannover, GERMANY
Proper preventive maintenance and cleaning can increase the diffuser lifetime up to 50%. Before choosing one of these techniques it is necessary to check the material resistance of the diffuser membrane and to verify the type of fouling. Every wastewater is special and may effect its own type of ...
Manufactured by:Jäger Umwelt-Technik GmbH based inHannover, GERMANY
Due to our rubber and plastic manufacturing expertise Jäger Umwelt-Technik is the preferred partner of many OEM waste water companies for their proprietary diffuser ...
Manufactured by:Jäger Umwelt-Technik GmbH based inHannover, GERMANY
Our products are manufactured on 3 continents meeting: Local content requirements, price level expectations, transport costs restrictions. All manufacturing plants of the Jaeger Group are certified according ISO 9001, TS 16949 and ISO 14000. ...
Manufactured by:EnviroChemie GmbH - part of the EnviroWater Group based inRossdorf bei Darmstadt, GERMANY
Stabilising membrane plant operation with suitable treatment agents. Cleaning and stabilising membrane plants: Clogging can occur during the operation of a membrane system such as ultrafiltration or reverse osmosis, leading to a drop in performance or system failure. We use special antiscalants and membrane cleaners to counteract this and to increase cleaning intervals. We select high-performance ...
Manufactured by:Jäger Umwelt-Technik GmbH based inHannover, GERMANY
We are material experts. But this does not exempt our customers from performance and lifetime evaluation by thorough field testing in different waste water applications and operation ...
Manufactured by:Jäger Umwelt-Technik GmbH based inHannover, GERMANY
For superior performance diffusers and membranes have to be engineered according the intended application including with special focus on Polymer formulation for specific performance requirements. Physical properties of the base membrane material. Mechanical requirements of the membrane which is perforated to allow air to escape. Shape and geometry of the plastic support structure to insure an ...
Manufactured by:Jäger Umwelt-Technik GmbH based inHannover, GERMANY
To determine SOTE and medium scale performance tests we cooperate with the Leibnitz University of ...
Manufactured by:BLUE-tec - Colubris Cleantech based inWageningen, NETHERLANDS
Treating industrial wastewater with membrane technology by MBR and forward osmosis towards Zero Liquid Discharge ...
Manufactured by:A3-USA, Inc. based inChinquapin, NORTH CAROLINA (USA)
In addition to the in-house membrane technology (Membrane Bioreactors, Process Water & Wastewater Membrane Treatment Plants) and CONTEC coarse & fine screens, A3-USA works in collaboration with Team Gemini, Ecohouse, and Roediger to provide green housing developments with state-of-the-art MBR technology to enable ...
Manufactured by:atech innovations gmbh based inGladbeck, GERMANY
atech innovations produces advanced membranes formembrane bioreactor for wastewater treatment. The ceramic membranes are located in the effluent of the bioreactor, for removing of the microbes. By this arrangement, high fluxes an be achieved with little footprint of the membrane system. ...
Manufactured by:Dynatec Systems Inc. based inBurlington, NEW JERSEY (USA)
Dynatec supports its existing plants by providing expert technical assistance when problems or necessary process changes occur. Dynatec uses qualified engineers to offer technical assistance and process recommendations. In most cases, the engineer who designed the plant and oversaw the construction and startup will provide direct support to the plant ...
by:Almar Water Solutions Australia based inBrisbane, AUSTRALIA
Almar Water Solutions Australia develops and provides a wide array of sustainable chemical solutions for UF and RO membranes, wastewater treatment, cooling tower treatment, and boiler water treatment. Our Chemical Solutions enhance process performance, protect equipment, maximize asset life, and enhance ...
by:Natural Systems Utilities (NSU) based inHillsborough, NEW JERSEY (USA)
As a leader in the development of wastewater treatment, NSU works with landfill owners and developers to finance, build, and operate on-site leachate treatment that helps to reduce the costs associated with hauling the material ...
by:Herbert, Rowland & Grubic, Inc. based inHarrisburg, PENNSYLVANIA (USA)
HRG provides comprehensive engineering services related to the design and operation of water and wastewater systems for government and private sector clients. This includes the design of collection, treatment, and distribution facilities as well as testing and remediation to ensure you are in compliance with ever-changing environmental ...
Manufactured by:Polymem based inCastanet-Tolosan, FRANCE
Polymem is involved in French and International R&D cooperative projects involving global players in water and gas treatment using membrane ...
Manufactured by:Aqualter Group based inChartres, FRANCE
Aqualter Construction has existed since 1970. The leading French construction company in the water sector independent of the majors, we have built nearly 900 wastewater treatment plant. A strong principle has guided the design and execution of our offerings from the start: the quest for sustained performance from the processes, for both operator and structural environment alike. ...