Refine by
Laboratory Testing Services In Italy
45 services found
by:Endo Endoengineering Srl based inFalconara Marittima, ITALY
Before placing on the mass production market or before commissioning of an equipment or a production line, the manufacturer must be sure that the product is safe under normal or single fault conditions. It is therefore clear that the tests performed on samples representative of the production or the final product is a requirement in terms of quality and safety of end ...
Manufactured by:P. Energy based inFontaniva (Pd), ITALY
We provide Laboratory equipment for R&D Centers, Institutes and Universities that want to set-up testing laboratory for quality control of materias and PV ...
Manufactured by:Cambi Group AS based inAsker, NORWAY
In cases where sludge composition is less known, there may be uncertainties regarding the effects of Thermal Hydrolysis. To address this, Cambi collaborates closely with clients to perform laboratory testing, assessing the benefits of Thermal Hydrolysis for specific sludge types. The results provide high-quality data to inform the Basis of Design for large-scale ...
Manufactured by:GBE S.p.A. based inOrgiano (VI), ITALY
GBE SpA has three test rooms subject to regular calibration and checks, and SIT-certified instrumentation, used to offer a laboratory service for checking insulation, making electrical measurements of any type and measuring leakage, even on the customer’s own transformers and machinery. The laboratory service can identify malfunctions and ...
Manufactured by:ltalmatch Chemicals Group based inGenova, ITALY
At the forefront of every customer engagement, Magpie receives samples and conducts systematic and thorough laboratory tests. The analytical equipment includes ICP-OES, IR and UV. Magpie adheres to the highest quality and safety standards. Magpie delivers a comprehensive feasibility report showing the results of the analysis along with a recommendation on the ...
by:GD TEST srl based inTorino, ITALY
Sample preparation; Tuninetti’s hydraulic jack for undisturbed samples, max press. 250 bar. Controls’ electric agitator. Controls’ damp room. granulometric and physical ...
by:GD TEST srl based inTorino, ITALY
Sample preparation; Tuninetti’s hydraulic jack for undisturbed samples, max press. 250 bar. Controls’ electric agitator. Controls’ damp room. granulometric and physical ...
by:GD TEST srl based inTorino, ITALY
Rock mechanics laboratory is certified by the italian ministry of infrastructure and transport. Geomecanical and geotechnical characterisation. Tests for mechanised excavation. Tests for natural stone for use in ...
by:Istituto Italiano dei Plastici srl based inMonza, ITALY
IIP has laboratories to measure-determine physical-mechanical and chemical features of products made of different materials. These laboratories are accredited by Accredia (National system for the accreditation of certification and inspection bodies). By Packaging characterization laboratory, tests are performed on products ...
Manufactured by:Italvacuum S.r.l. based inBorgaro (TO), ITALY
Semi-industrial and laboratory drying tests of your products, in pilot plants installed in ours establishment or if this is not possible at your ...
by:Endo Endoengineering Srl based inFalconara Marittima, ITALY
The engineering consultancy offered by Endo Engineering provides the following services provided by Community Directives: Analysis of products / devices / machines, Drafting of technical documentation, Risk Analysis, Drafting user manual, Interfacing with local Bodies Notifiers and Test Laboratory (if necessary), Support ...
Manufactured by:R.T. Valvole Industriali Srl. based inTurbigo, ITALY
During the stages of manufacturing process, all components are subjected to rigid quality controls according to RT Quality Control Plans and EN, ISO and DIN applicable standards. All completed valves, before leaving the factory have undergone to several tests on up to date equipment. The testing equipment are regularly calibrated according to formal procedures ...
Manufactured by:Erreesse s.r.l. based inGrignasco (NO), ITALY
Thanks to a strong cooperation with Chemical Laboratories the following tests can be performed according to Customer’s and project specification requirements: Mechanical and Impact test down to –196°C. Chemical analysis check. Corrosion tests. Micro examinations. Ferrite check. Hydrogen-Inducted Cracking ...
by:European Commission, Joint Research Centre (JRC) based inBrussels, BELGIUM
Measurement standards and benchmarks are indispensable components of modern measurement systems for achieving reliable, and thus comparable, measurement results for environmental monitoring. Therefore, the JRC's certified reference materials (CRMs) for environmental analysis are needed by testing laboratories for performance assessment and validation of ...
Manufactured by:WAMGROUP S.p.A. based inPonte Motta/Cavezzo (MO), ITALY
The WAMGROUP research and test laboratory, set up in 1987, today is Italy’s foremost private centre specializing in both pure and applied research concerning powdery and granular materials, as well as the development of bulk solids handling and processing equipment. ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
We continue to offer you the service you are used to. The Swiss accreditation body SAS grants PMS accreditation as a testing laboratory for testing cleanroom systems and thermal processes in accordance with ISO/IEC 17025:2017. The scope of STS0566 and SCS0118 accreditation is defined in the official directory of accredited ...
by:Endo Endoengineering Srl based inFalconara Marittima, ITALY
With the world globalization and electronic commerce is extremely easy to find technologically advanced products at competitive prices compared to national and international markets usually reference. The products imported from countries outside the EEC into the European Union must be CE certificated and marked before their entry into the European Economic ...
Manufactured by:Althena Medical based inCittà sant’Angelo (PE), ITALY
Our first step is listening to the customer to provide them with the best possible “feasibility analysis” (request one as well, now and with no constraints, from ...
Manufactured by:Stalam S.p.A. based inNove (VI), ITALY
The Stalam testing lab is an integral part of our R&D and engineering departments. Through testing and analysis of the results, our experts can study in details the characteristics and behaviour of a product submitted to the Radio Frequency field, thus assessing the technical and economic feasibility of drying and thermal processes on specific substrates, based on customers’ ...
Manufactured by:Guidetti Recycling Systems based inRenazzo (FE), ITALY
Free tests with your own material at Guidetti testing lab, 15.000 sqm and high machines’ availability for any kind of ...