- Home
- usa alabama
- Services
Refine by
Applications
- B2B Marketing for Agriculture Industry
- B2B Marketing for Aquaculture Industry
- B2B Marketing for Engineering Industry
- B2B Marketing for Environmental Compliance
- B2B Marketing for Manufacturing Companies
- B2B Marketing for Marine Industry
- B2B Marketing for Oil and Gas Industry
- B2B Marketing for Small Businesses
- B2B Marketing for Water and Wastewater Industry
Xprt Services In Alabama
603 services found
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
Some specialized field projects require on-site technical expertise to assure proper instrument performance and meet project goals. Whether due to time constraints, untested applications, or other analytical challenges the best option is to draw on the extensive expertise of Tekran scientists. We have extensive field experience with Tekran instrumentation that we are ready to put at your ...
Premium
Manufactured by:Finn Corporation based inFairfield, OHIO (USA)
Consumables for your FINN Hydroseeder: FINN is more than an equipment manufacturer. We are your total solution using FINN equipment and materials. We offer a wide range of FINN branded consumables (or additives) designed specifically for FINN HydroSeeders and their applications. We also offer Alternative Daily Cover (ADC) products for saving airspace in landfill applications, as well as TRU-Wood ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
Tekran’s commitment to our customers extends well beyond the point of purchase. We offer phone, e-mail and on-site technical support for the lifetime of all of our instrumentation. Customer support is our highest priority and we will work diligently to optimize your Tekran System performance. If you are interested in any of our extended product services listed below, please contact the ...
Premium
Manufactured by:Tekran Instruments Corporation based inToronto, ONTARIO (CANADA)
The Tekran Seattle Office takes on a select number of consulting projects under the direction of our Chief Scientist, Dr. Eric Prestbo. Please contact us if you need consulting in the following areas of ...
Premium
Manufactured by:Finn Corporation based inFairfield, OHIO (USA)
As the industry leader in erosion control equipment, we offer the industry’s best warranty on the industry's best ...
Distributed by:Brownlee-Morrow Company based inBirmingham, ALABAMA (USA)
Brownlee-Morrow is a leading pump and rotating equipment repair service provider in the Southeastern US. With certified service centers in Birmingham and Mobile, we are available around the clock for in-shop and field repairs and start-up services. We can react to emergency repair requests and outage schedules. Call us anytime for pick-up, delivery, or any repair service ...
Manufactured by:Substrata, LLC based inHenderson, ALABAMA (USA)
Perma-Zyme is used worldwide to stabilize the soil for unpaved road construction to create a long-lasting rock solid surface that will last over 10 years. When using Perma-Zyme, you can rest assured that your dirt road will be strong enough for all traffic and climates, including rain and snow, with little to no maintenance. Perma-Zyme is an environmentally friendly solution, so you can rest ...
Manufactured by:Mark-10 Corporation based inCopiague, ALABAMA (USA)
Calibration of Mark-10 instruments is recommended approximately once per year. Heavy usage or company policy may necessitate more frequent calibration. We have a fully equipped climate-controlled calibration laboratory and are capable of providing quick turnaround. All calibrated gauges and sensors include a NIST-traceable (National Institute of Standards and Technology) ...
by:Process Engineering Associates, LLC based inOak Ridge, TENNESSEE (USA)
Title V permitting support: Emissions estimating. Emissions inventory preparation. Regulatory assessment support. Compliance assessment support. Reasonably Available Control Technology (RACT) evaluations. Best Available Control Technology (BACT) evaluations. Maximum Achievable Control Technology (MACT) evaluations. Lowest Achievable Emission Rate (LAER) evaluations. Monitoring, reporting, record ...
by:Process Engineering Associates, LLC based inOak Ridge, TENNESSEE (USA)
The very front end of every large design project is critical to the long-term success or failure of the plant. While the business plan identifies the economic opportunity, the Front End Engineering Design Study (FEED) will establish the set of process operating conditions and equipment to achieve the level of reliability, efficiency, and safety required. This design phase sets the direction for ...
by:Process Engineering Associates, LLC based inOak Ridge, TENNESSEE (USA)
The Schedule A or Basic Engineering Design package refers to a completed process design package that includes all the necessary information required by an Engineering/Construction firm or Detail Engineering firm to perform the detail engineering of the plant (details such a structural steel supports, buildings, wiring, piping details, insulation, equipment vendor/model selection, etc.). PROCESS ...
by:Process Engineering Associates, LLC based inOak Ridge, TENNESSEE (USA)
We are often called upon by clients to evaluate process options aimed at achieving one or more specific goals. These goals run the gamut from improved throughput, quality, or consistency, to emissions reduction, energy recovery, or waste minimization. In such cases we begin by determining the current state of the process. This is done through a series of interviews and discussions with the ...
by:Process Engineering Associates, LLC based inOak Ridge, TENNESSEE (USA)
Many clients come to us wanting chemical engineering process design assistance after they have done some level of due diligence to confirm that their process technology should work in real life. Sometimes the available information will include well executed pilot plant trial data, process heat and materials balance information, and all the necessary physical and chemical properties fully defined. ...
by:Process Engineering Associates, LLC based inOak Ridge, TENNESSEE (USA)
As a completely independent engineering company not affiliated with any other groups and not selling licensed technologies, PROCESS is ideally qualified to provide a critical process engineering evaluation before large project decisions are finalized. A few of the ways we can help in this regard are: Independent 3rd Party Design Reviews. Plant, Process, or Technology Pre-Purchase Due Diligence ...
Manufactured by:Process Barron based inPelham, ALABAMA (USA)
ProcessBarron has earned the reputation as “America’s Emergency Fan Repair Company,” offering on-site fan removal, repair and installation in as quickly as three ...
Manufactured by:Applied Chemical Technology (ACT) based inFlorence, ALABAMA (USA)
ACT's laboratory technicians provide quick and low cost assessments of process and product development, as well as custom analytical procedures and product quality testing. Our laboratory supports pilot plant operations with scale-up data, chemical analysis and product quality testing. We can also provide assistance and training for specially developed lab equipment designed and constructed at ...
by:Intertek Group plc based inChicksaw, ALABAMA (USA)
In order to facilitate the manufacturers to meet or exceed the compliance level, Intertek provides compliance verification against the local law requirements including to BSCI, ICTI, SA 8000, and ...
by:Intertek Group plc based inChicksaw, ALABAMA (USA)
Environmental testing for water, soil, air, sludge, petroleum, chemicals, and other ...