Refine by
Material Testing Services In Texas
51 services found
Manufactured by:ACE Geosynthetics based inHouston, TEXAS (USA)
We provide accurate, reliable, and comprehensive geosynthetic testing and research services for evaluating physical, mechanical, hydraulic, degradation and durability properties of materials. For geosynthetic materials including geogrids, geotextiles, and geotextile-related products, we are capable of conducting tests in ...
by:HTS, Inc. Consultants based inHouston, TEXAS (USA)
HTS, Inc. Consultants provides construction materials testing and quality assurance/ quality control, to private industry as well as federal, state and local governmental agencies. HTS" construction material testing laboratories are accredited by the American Association for Laboratory Accreditation (A2LA) in accordance with ...
by:Frost GeoSciences, Inc. based inHelotes, TEXAS (USA)
Construction Materials Testing services offered by Frost GeoSciences, including the analysis of the engineering and physical properties of construction materials and manufactured products, may greatly diminish the probability for issues that may arise during construction. Frost GeoSciences may also assist in studies of faulty or damaged ...
by:Raba-Kistner Consultants, Inc. based inSan Antonio,, TEXAS (USA)
Raba Kistner Consultants has set itself apart in our industry by providing specialized laboratory and field testing. Some of these tests are conducted to qualify materials while others are conducted either by Non-Destructive Methods or Destructive methods to determine the in-place properties of materials and/or structures. A ...
by:Raba-Kistner Consultants, Inc. based inSan Antonio,, TEXAS (USA)
Raba Kistner Consultants provides construction special inspection and testing services. We have the professionals, experience, equipment and knowledge to protect your interests during the construction of your project. Through close communication with clients, designers and contractors, CoMET technicians operate with minimal disruption to active sites such as schools. In addition, our level of ...
by:Raba-Kistner Consultants, Inc. based inSan Antonio,, TEXAS (USA)
Our staff of Certified Welding Inspectors (CWIs) and Non-Destructive Testing Technicians (NDE) provide Structural Steel and Mechanical Piping Inspection and Testing. Raba Kistner Consultants provides our clients with qualified, knowledgeable professional and technical personnel to qualify welding procedures, to qualify project welders, and to perform required inspections and evaluations of both ...
by:Nemko based inLysaker, NORWAY
HALT generally consists of five types of stresses, which are sequentially performed in order to determine the operating and destruction limits of the product with respect to temperature, vibration, and/or combination of the two. This methodology is successfully used by automotive, computer, oil and gas instrumentation companies, etc. to release a more reliable product. ...
by:Nemko based inLysaker, NORWAY
Once a HALT test has been performed on a product, HASS (High Accelerated Stress Screening) can be utilized to complete your continuing compliance program and ensure that your product still meets the reliability standard that was achieved during the design and prototype phase. This process is not only utilized by manufacturers during pre-product release, but most often later in a product’s ...
Manufactured by:Ham-Let Group based inWest Sussex, UNITED KINGDOM
Ham-Let’s products are fully traceable down to the raw material “Heat Code”. Raw material test certificates are available upon request. Other test reports and quality certifications are available in the web site or upon request. Our quality system is your permanent representative on the production ...
Manufactured by:International Cooling Tower USA, Inc. based inDeer Park, TEXAS (USA)
ICT conducts a range of inspections depending on a client’s individual cooling tower requirements. These include; age, condition, severity of service and type of material. Once the requirements are determined, the level of inspection can be planned. From a simple walk-down to a Level 3, remove fill, our trained inspectors work together with our engineers to provide a ...
by:Team Industrial Services, Inc. based inAlvin, TEXAS (USA)
Team utilizes LP inspection to detect surface discontinuities in both ferromagnetic and non-ferromagnetic materials. In castings and forgings, these may be cracks or leaks in new products or fatigue cracks in in-service components. Testing is performed using visible red dyes under visible light conditions or fluorescent dyes under ultraviolet light. As the name ...
by:Separation Systems Consultants, Inc. (SSCI) based inHouston, TEXAS (USA)
Extended onsite and offsite soil, water and materials testing. Public health risk assessment if contaminants are found. Hazardous and nonhazardous waste removal. Site remediation and ...
by:TRI/Environmental, Inc. (TRI) based inAustin, TEXAS (USA)
To assist our clients in maintaining their awareness of continual industry developments, TRI staff routinely provide lectures, workshops and short courses designed to focus on various aspects of geosynthetic materials, testing, specifications and field services. Professional Development Hours (PDH) are offered for most course ...
by:smartEE consulting LLC based inElgin, TEXAS (USA)
Despite being one of the broadest and most unpredictable risk areas for any recycling and asset recovery company that sends waste, recyclables, or untested assets to downstream vendors, the management of downstream due diligence and material disposition is often neglected or falls short of true transparency. Even if you are managing and processing all of your ...
by:ALS Environmental based inHouston, TEXAS (USA)
At ALS our Pharmaceutical Division is a provider of testing services to the Pharmaceutical and Healthcare industries in Australia, Europe and Asia. Committed to exceeding customer expectations we are able to provide high quality solutions across a range products, including human and veterinary products, intermediates and raw materials. Testing is ...
by:Green Star Environmental based inArlington, TEXAS (USA)
At a minimum, Green Star's environmental site assessments (ESAs) are conducted in general accordance with the American Standard for Testing Materials (ASTM) 1527-94 guidance document. ESAs conducted following this standard adequately address the issue of due diligence for the responsible or potentially responsible party. In addition to the ASTM standard, Green ...
Manufactured by:Flowserve Corporation based inIrving, TEXAS (USA)
How to minimize downtime should not be your biggest concern. That’s why we’ve made it ours. With Flowserve, plant managers and operators have access to one of the largest repair and maintenance organizations in the industry. We are supported by a global network of quick response centers, a fleet of fully equipped mobile service vehicles, and hundreds of highly qualified engineers and ...
by:Gannett Fleming, Inc. based inCamp Hill, PENNSYLVANIA (USA)
The lab is certified by the American Association of State Highway and Transportation Officials (AASHTO) Accreditation Program to perform 28 American Society for Testing and Materials (ASTM) and/or AASHTO test ...
Manufactured by:NAVCO - National Air Vibrator Company based inHouston, TEXAS (USA)
NAVCO offers a variety of services related to material flow solutions. ...
Manufactured by:CNC Flow Control based inHouston, TEXAS (USA)
Our Valve Quality Development Team conducts comprehensive manufacturers audits and inspections on both the product and the manufacturer's production process. These stringent audits and inspections ensure the manufacturer's ability to produce and provide products of consistent quality demanded by our customers and in accordance with documented procedures. Once manufacturers are qualified, the VQDT ...