Refine by
Numerical Modeling Services Near Denmark
208 services found
by:Coastal Dynamics based inPort-of-Spain, TRINIDAD & TOBAGO
Numerical Models are widely utilized and can be adapted to most coastal regions using basic oceanographic parameters. All modeling routines are supplemented by field investigations for calibration and validation of the model output to assure the reliability of the data. The consulting partners of Coastal Dynamics have worked ...
by:BEM Systems, Inc. (BEM) based inChatham, NEW JERSEY (USA)
BEM has expertise in developing and utilizing a range of numerical modeling tools to help guide decisions affecting natural and water resources. These include advanced model programming and development emphasizing simulation and analysis of hydrologic/hydraulic ...
by:Healtis SAS based inVandœuvre-lès-Nancy, FRANCE
Medical devices may experience an increase in temperature as a result of the radio frequencies present during an MRI exam. Evaluation of this radio frequency heating is mandatory when the device is in contact with the patient. The heating depends on multiple factors: physical characteristics of the device, characteristics and settings of the MRI, positioning of the device vis-à-vis the ...
by:Lorax Environmental Services Ltd. based inVancouver, BRITISH COLUMBIA (CANADA)
Lorax provides numerical modeling services to the offshore oil & gas industry by simulating the transport and dispersal of Produced Water and Well Cuttings to answer questions related to operational and regulatory ...
by:Applied Technology & Management, Inc based inJacksonville Beach, FLORIDA (USA)
ATM has offered modeling as a core service since the firm's inception. Our modeling experts are proficient in the development, application and review of a broad range of tools that simulate all aspects of the hydrologic ...
by:Hydro Geo Chem, Inc. based inTucson, ARIZONA (USA)
Quantitative assessment of environmental processes is a powerful approach for focusing site investigations, screening remedial alternatives, and winning regulatory approval for cost-effective remedial approaches. Quantitative assessment of environmental processes involves the use of mathematical models, both analytical and numerical, to simulate the movement of ...
by:BHR Group Limited based inCranfield, UNITED KINGDOM
Our fluid engineering experts apply commercial computational fluid dynamics (CFD), finite element analysis (FEA), and pipe network analysis codes to address real industrial challenges. This technical capability is combined with our wealth of fluid flow knowledge to enhance these codes with bespoke numerical ...
Manufactured by:BM Tecnologie Industriali srl based inLimena PD, ITALY
Numerical models, if correctly calibrated with the sewer flow rate measurements, will be able to verify the behaviour of the sewer network in case of anomalies or floods and to test the sewer network if new parts are going to be built, if spillways are going to be set or closed, if rain water storage tanks or flywheels are used, if existing pumping stations are ...
Manufactured by:CityAir Corp based inDelaware, DELAWARE (USA)
Identification of unknown pollution source based on data analysis, Identification of influence of the industrial unit (or any other source) on air quality in the area, Modelling of possible consequences of city area development, Best optimal approach for monitoring networks ...
by:Verdantas based inManchester, NEW HAMPSHIRE (USA)
Computational Fluid Dynamics (CFD) is a reliable, cost-effective tool for solving many complex flow-related problems involving liquid and gas flows, hydraulic flows, heat and mass transfer, as well as particles and sprays. The numeric modeling staff at Alden offers decades of combined experience in CFD modeling and simulation of ...
by:Hydrophil iC based inVienna, AUSTRIA
Development of numerical models. Hydraulic modelling of surface water bodies (1D, 2D & 3D). Hydro-morphologic modelling. Precipitation-runoff modelling. Habitat modelling. Sediment transport modelling (1D, ...
by:Hydro Geo Chem, Inc. based inTucson, ARIZONA (USA)
Phoenix-Goodyear Airport Superfund Site: Performed SVE pilot tests on four sites and used numerical modeling to design ...
by:Witteveen+Bos Consulting Engineers based inDeventer, NETHERLANDS
Hydrodynamics and morphology are disciplines that focus on the numerical modelling of waves, tides and ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Itasca’s finite volume (FV) approach uses the shear strength reduction (SSR) method for numerical modeling. This formulation is far superior to more traditional limit equilibrium (LE) methods and offers several advantages over finite element (FE) methods as ...
by:Nicklin Earth & Water based inBozeman, MONTANA (USA)
Following the development of the conceptual model, the numerical model is systematically constructed, then calibration and sensitivity analyses of the relevant hydraulic parameters are performed. Once it is justified that the model satisfactorily represents the ground-water system of interest and that it is a reliable, predictive ...
Manufactured by:VorTech Water Solutions Ltd. based inGalway, IRELAND
Process models are effective tools which can be used to model and understand relevant aspects of a treatment process. Numerical modelling can be used for advanced control, optimization, sensitivity analysis, scenario modelling, statistical analysis, and management of treatment plants. VorTech also provide clients ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
Combining experience, conventional approaches, and numerical modeling tools, Itasca can simulate mining of client’s sites first, to select mining methods appropriate to the orebody geometry, rock mass strength conditions, and stress state. Itasca understands the economics involved in any mine design and ensures that mineral recovery is optimized while ...
by:TK Consult AG based inZurich, SWITZERLAND
Groundwater plays a number of very important roles in our environment and in our economies. It supports rivers, lakes and wetlands. As such, groundwater resources must be preserved. To that end, numerical models are an essential tool for sustainable management. TK Consult AG has developed a modelling strategy consisting of (1) analysis of ...
by:Femto Engineering based inDelft, NETHERLANDS
We help you understand your product or process by gaining valuable insights with finite element analyses. What can we do for you. Finite Element Analyses (FEA) are the numerical modelling of mechanical behaviour using computational and analytical techniques. The insights gained by FEA simulations result into a positive impact on your product development goals. ...
by:ITASCA Software based inMinneapolis, MINNESOTA (USA)
To estimate rock mass strengths, Itasca uses the full gamut of engineering approaches, including analytical, empirical, and numerical modeling approaches. ...