Refine by
Applications
- Hydraulic modeling for municipal water treatment
- Software solutions for stormwater and floodplain management sector
- GeoModeller and Intrepid Software for Oil & Gas
- Software Solutions for Mining
- Medical solutions for autonomic failure diagnosis sector
- Environmental Noise Mapping Software for Professionals
- Environmental Noise Mapping Software for Construction Noise
- Air dispersion modeling for environmental consulting companies
- Air dispersion modeling for governmental agencies
- Air dispersion modeling for academia
- Software Solutions for Sanitary Sewers Modeling
Flow Modeling Software Available In Congo
123 software items found
Showcase
by:Waterloo Hydrogeologic, PART OF NOVA METRIX LLC based inWaterloo, ONTARIO (CANADA)
Flex 12.0 is designed for teams that need defensible models and clear client/regulator deliverables. New transport and particle-tracking support expands the technical range of projects while keeping assumptions, model setup, results, and visuals closer together in a traceable workflow. Adds more advanced engine coverage for complex projects: USG transport, MT3D-USGS reactions, MODFLOW 6 PRT, ...
by:Applied Flow Technology based inColorado Springs, COLORADO (USA)
AFT Fathom is a fluid dynamic simulation software for engineers, used to calculate pressure drop and pipe flow distribution in liquid and low-velocity gas piping and ducting systems. Accurately simulate individual system components and interaction, Tightly integrates equipment characteristics, analysis and output with your system’s schematic representation, Provides a wide ...
by:RockWare, Inc. based inGolden, COLORADO (USA)
Solve challenging subsurface flow problems with PetraSim. PetraSim is the graphical interface for the TOUGH2 family of simulators. Developed at Lawrence Berkeley National Laboratory, TOUGH2 and its derivatives are recognized for their powerful simulation capabilities for fluid flow and heat transfer in porous and fractured ...
by:Lohmeyer GmbH based inKarlsruhe, GERMANY
MISKAM is a 3-dimensional non-hydrostatic climate -, flow - and dispersion model for the microscale prediction of flow - and concentration fields. It covers in the vicinity of single buildings, as well as streets with adjacent buildings and city quarters. MISKAM was developed by Dr. J. Eichhorn, Institute of Atmospheric Physics, University of ...
Showcase
by:Innovative Hydraulics based inWexford, PENNSYLVANIA (USA)
Visual Hydraulics is a state of the art, flexible modeling tool. It is used primarily for modeling the hydraulic characteristics of water and wastewater treatment plants, and is capable of analyzing entire hydraulic profiles. The software follows the traditional method for analyzing water surface profiles: a downstream control point is selected, and the hydraulic profile is then determined ...
Premium
by:Waterloo Hydrogeologic, PART OF NOVA METRIX LLC based inWaterloo, ONTARIO (CANADA)
MODFLOW-SURFACT is one of the most comprehensive flow and transport models available. Built around the MODFLOW code, MODFLOW-SURFACT includes advanced computational modules that are based on robust, efficient, mass-conserving algorithms making it faster and more accurate than its transport modeling ...
Premium
Manufactured by:Unicon Engineers based inCoimbatore, INDIA
Unicon is equipped with Computational Fluid Dynamics software and more than 35 years in carrying out study of ESP ...
Premium
by:Cambridge Environmental Research Consultants (CERC) based inCambridge, UNITED KINGDOM
ADMS-Screen is a screening model for air quality calculations. It models dispersion from a single stack to calculate ground-level concentrations, providing rapid assessments of stack height. Comparison with air quality strategy objectives and European Union air quality standards can be made. The model also has an option to include building effects. It can be used to indicate whether further ...
Premium
by:Innovative Hydraulics based inWexford, PENNSYLVANIA (USA)
Version 5.1 marks our most powerful, flexible version ever. We've added more options and more features that make the software easier to use. That's right, Version 5.1 is here. Version 5.1 marks our most powerful, flexible version ever. We've added more options and more features that make the software easier to use. Version 5.1 includes more powerful manipulation of the graphical user ...
Premium
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
CALRoads View is an air dispersion modeling package for predicting air quality impacts produced by mobile sources at or near roadways and roadway intersections. Three U.S. EPA models – CALINE4, CAL3QHC, & CAL3QHCR – are combined into one seamless graphical interface. These models predict air pollution concentrations of carbon monoxide (CO), nitrogen dioxide (NO2), particulate ...
Premium
by:Cambridge Environmental Research Consultants (CERC) based inCambridge, UNITED KINGDOM
FLOWSTAR-Energy is a practical, high resolution model that simulates air flow and turbulence over flat or complex terrain, including the effects of stratification, variable surface roughness and wind turbines in operation. FLOWSTAR-Energy is an extended version of the FLOWSTAR model of flow over complex terrain; FLOWSTAR-Energy ...
Manufactured by:Rose & Associates, LLP based inHouston, TEXAS (USA)
Our software solutions seamlessly integrate Rose course concepts, leveraging the analysis of uncertainty for resource estimation, aggregation, and cash flow modeling. With clear visibility from data inputs to calculated outputs and charts, our software facilitates resource and chance of success and value estimation, ensures quality control and consistent ...
by:Bentley Systems, Incorporated based inExton, PENNSYLVANIA (USA)
SVENVIRO offers geo-environmental analysis applications. The set is well-suited for solving complex flow and contaminant transport models, coupled flow and freeze/thaw analysis, and coupled flow, thermal, and pore-air flow models. The freeze/thaw analysis includes a comprehensive climatic ...
Manufactured by:Vaughan Company, Inc. based inMontesano, WASHINGTON (USA)
The CFD (Computational Fluid Dynamics) software used at Vaughan Co., Inc. for analysis is among the top programs available in the world for this type of detailed computer flow modeling work. The problem is solved using techniques similar to finite element stress analysis. Essentially, the fluid volume is broken down into hundreds of thousands of volume elements ...
by:MicroFEM & MLU based inAmsterdam, NETHERLANDS
MicroFEM for Windows is a Finite-Element Program for Multiple-Aquifer Steady-State & Transient Ground-Water Flow ...
Manufactured by:FS Brainard & Co. based inBurlington, NEW JERSEY (USA)
The Model 100 Program software is compatible with all versions of Windows and interfaces with the Model 100EL and 100AF Flow Recorders, Model 100P Pressure Recorder, and the Model 100XP Pressure Recorder. It is used to program the recorders, download data, and generate graphs and reports. The software performs ...
by:Bentley Systems, Incorporated based inExton, PENNSYLVANIA (USA)
SVSOILS is the world’s premier product for estimating the hydraulic properties for flow modeling in unsaturated soils. Our database contains data on more than 6,200 soil-water characteristic curves and provides numerous theoretical methods of estimating the soil-water characteristic curve (SWCC) or unsaturated hydraulic conductivity curve. ...
by:ZephyScience based inLasalle , FRANCE
ZephyTOOLS is Wind Farm Design software using Computational Fluid Dynamics and Artificial Intelligence aiming in providing the most accurate results and trustable energy assessments. Including an efficient wind data processing tool (ZephyWDP) along with an optimized flow model (ZephyCFD), generating complete energy yield assessment in a single platform is now ...
by:C&R Technologies, Inc. (`CRTech`) based inBoulder, COLORADO (USA)
FloCAD is a fluid dynamics software add-on module for Thermal Desktop®, together they provide a complete thermohydraulic software tool for fully integrated fluid flow and heat transfer analysis. With FloCAD, the mechanics of building fluid flow models is very similar to that of building thermal models, with many of the ...
by:CivilGEO, Inc. based inMadison, WISCONSIN (USA)
Rapidly construct HEC-RAS models from a variety of data sources. GeoHECRAS significantly speeds up HEC-RAS model creation and review, producing better and more accurate results. Compute water surface profiles for steady and unsteady flow models, bridge and culvert roadway crossings, FEMA floodplain encroachments, stream ...