Refine by
Electrode Array Software
14 software items found
by:Geo2X SA based inYverdon-les-Bains (VD), SWITZERLAND
Electrical methods are based on the measurement of apparent electrical resistivities in the ground with a multi-electrode array. They include electrical profiling, vertical electrical sounding and tomography in 2D / ...
Manufactured by:Advanced Geophysical Operations and Services Inc. (AGCOS) based inNorth York, ONTARIO (CANADA)
ZondRes2D is designed for 2D resistivity and IP, typical VES (DES), as well as electrotomography data interpretation. The program provides 2.5D modeling and data inversion. 2.5D means that geological structure is 2D, but the source field is 3D. Land, marine and borehole versions of the program are available. ZondRes2D includes VES, DES, electrotomography modeling, data processing and analysis, as ...
by:Zond Software based inSaint-Petersburg, RUSSIA
ZondHED1D program is designed for one-dimensional data interpretation of AC vertical electric sounding (frequency mode). A method of the vertical electrosounding (VES) is one of the oldest methods of electric prospecting. The first applications of method were in 20th years of XX century. Comparative simplicity and evidence of VES resulted in its wide distribution and development in the whole ...
by:Zond Software based inSaint-Petersburg, RUSSIA
Zondip1d program is designed for one-dimensional resistivity and induced polarization vertical electrosounding data interpretation (with taking account frequency). A method of the vertical electrosounding (VES) is one of the oldest methods of electric prospecting. The first applications of method were in 20th years of XX century. Comparative simplicity and evidence of VES resulted in its wide ...
by:Zond Software based inPaphos, CYPRUS
ZondProtocol represents ready solution for electrical tomography, and solves wide range of problems from protocol creating and field data processing to quality control and preparation data for inversion. The software provides support for the following instruments: SYSCAL, ABEM, COMMDD, ERA-MULTIMAX, TOMOZOND, OMEGA-48. Convenient interface and variety of data visualization features allow to solve ...
by:Zond Software based inSaint-Petersburg, RUSSIA
ZondRes2dp software is disigned for two-dimensional interpretation of resistivity and induced polarization data in land and cross-borehole variants. The program allows solve a 2.5-dimensional forward and inversion problem. The term “2.5” means that the geological section is two-dimensional and the field of the source is three-dimensional. The software allows working with standart ...
by:Zond Software based inSaint-Petersburg, RUSSIA
Zondres2d program is desined for two-dimensional interpretation of electrical tomography data by resistivity and induced polarization method in land, cross-borehole and marine cases. Electrical tomography is technique including both the method of field observations and technology of processing and field data interpretation. Its feature is multiple reusing as a source and receiver just the same ...
by:Zond Software based inSaint-Petersburg, RUSSIA
Zondres3d program is designeed for three-dimensional interpretation of electrical tomography resistivity and induced polarization data in land, cross-borehole and marine variants. Electrical tomography is a whole technique including the method of field observations and technology of processing and field data interpretation. Its feature is multiple reusing as a source and receiver just the same ...
Manufactured by:Advanced Geosciences Inc. (AGI) based inAustin, TEXAS (USA)
AGI EarthImager™ 3DCL is a three-dimensional resistivity and induced polarization (IP) inversion modeling software. It comes with the 32-bit basic version of EarthImager™ 3D along with the 64-bit 3DCL. 3DCL can access more than 2GB of memory space and carry out scalable parallel processing on a multi-core and/or multiprocessor PC. AGI Earthimager™ 3DCL is only available for ...
by:Zond Software based inSaint-Petersburg, RUSSIA
Specialized software ZondCHT is designed for two-dimensional data interpretation of cross-boreholes electrical resistivity and induced polarization tomography data. The program allows solve a 2.5-dimensional forward and inverse problem. The term “2.5” means that the geological section is two-dimensional and the field of the source is ...
Manufactured by:Advanced Geosciences Inc. (AGI) based inAustin, TEXAS (USA)
AGI EarthImager 3D is a three-dimensional resistivity and induced polarization (IP) inversion modeling software. It converts electrically gathered data and converts it into a 3D rendering presented using an advanced volume ...
Manufactured by:Guideline Geo based inSundbyberg, SWEDEN
The transient electromagnetic (TEM or time domain electromagnetic TDEM) method is extremely effective in determining electrical conductivity of the subsurface at depths from a few meters down to several hundred meters. Since electrical conductivity of soil correlates strongly with soil properties, TEM is a powerful tool for mapping of conductive layers and is commonly used for mapping sand and ...
Manufactured by:Schwab Research Technology - Lippmann Geophysical Instruments (LGM)) based inAchim, GERMANY
GeoTest is a software for controling geoelectric equipment in combination with many electrodes. This type of geoelectric measurement is called 'Multielectrode Geoelectrics'. Using two-dimensional or three-dimensional inversion techniques additionally for evaluation, this method is known as 'Geoelectric ...
Manufactured by:Advanced Geosciences Inc. (AGI) based inAustin, TEXAS (USA)
AGI EarthImager 2D is a two-dimensional inversion modeling software for affordable resistivity and induced polarization (IP) imaging. It interprets data collected by the SuperSting Wi-Fi in just a few clicks, including parallel boreholes or on a surface ...