Refine by
Applications
- Air dispersion modeling for environmental consulting companies
- Air dispersion modeling for governmental agencies
- Air dispersion modeling for academia
- Portable and fixed gas analysers for agricultural waste AD (large scale)
- Portable and fixed gas analysers for farm waste AD (small scale)
- Portable and fixed gas analysers for mixed food waste AD
- Portable and fixed gas analysers for landfill gas field management
- Portable and fixed gas analysers for landfill perimeter monitoring
- Portable and fixed gas analysers for biogas upgrading
- Portable and fixed gas analysers for sewage / waste water treatment AD
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Process analyzers & instruments for trace carbon monoxide
- Process analyzers & instruments for trace carbon dioxide
- Process analyzers & instruments for trace hydrogen
- Process analyzers & instruments for trace methane
- Process analyzers & instruments for thin film/semiconductor/PVD
- Process analyzers & instruments for atmospheric sampling reactive gases and CVD
- Channel networks solutions for precipitation measurement with GPRS transmission
- Channel Networks - Pump Stations and Lifting Facilities Solutions for flow rate monitoring on pumps sector
- Channel Networks - Stormwater Treatment Facilities for throttle monitoring via GPRS sector
- Stormwater Treatment solutions for logging of stormwater overflow tank without mains power sector
Xprt Software In Kuwait
103 software items found
Showcase
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
AERMOD View is Lakes Environmental’s intuitive interface for the U.S. EPA’s preferred air dispersion model, AERMOD. Designed to estimate pollutant concentrations from industrial sources, AERMOD accounts for terrain, building downwash, and meteorological ...
Premium
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
SCREEN View is a user friendly interface for the U.S. EPA screening model, SCREEN3. The SCREEN3 model can be used to estimate worst-case ground level concentrations for a single source as well as concentrations in the cavity zone, and concentrations due to inversion break-up and shoreline fumigation. SCREEN View can model scenarios with simple or complex terrain, with or without building ...
Premium
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
AQMIS, developed by Lakes Environmental Software, is an advanced environmental compliance solution designed to centralize all environmental data within your organization. By automating and streamlining complex tasks, AQMIS helps reduce operational costs and improve efficiency. The system (Ambient Quality Management Information System) consolidates environmental data, modeling tools, analytics, ...
Premium
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
This software provides a graphical user interface for the SLAB atmospheric dispersion model, specifically designed for denser-than-air releases. It is an essential tool for predicting hazardous zones and assessing potential impacts of accidental ...
Premium
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
AERSCREEN View is a user friendly interface for the U.S. EPA AERSCREEN screening-level air quality model and associated modeling programs. AERSCREEN estimates worst-case impacts of ground level concentrations for a single source by interfacing with the screening mode of the AERMOD model. Scenarios can include simple or complex terrain, building downwash, and NO2 ...
Premium
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
IRAP-h View is a user-friendly graphical interface for conducting a comprehensive multi-pathway human health risk assessment. It simultaneously calculates risk values for multiple chemicals, from multiple sources, at multiple exposure ...
Premium
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
CALPUFF View provides a complete graphical solution for the CALPUFF modeling system: CALPUFF, CALMET, CALPOST, and their related pre- and post-processors. All three modeling systems are supported by the ...
Premium
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
WRPLOT View is a fully operational wind rose program for your meteorological data. It provides visual wind rose plots, frequency analysis, and plots for several meteorological data formats. A wind rose depicts the frequency of occurrence of winds in each of the specified wind direction sectors and wind speed classes for a given location and time period. ...
Premium
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
CALRoads View is an air dispersion modeling package for predicting air quality impacts produced by mobile sources at or near roadways and roadway intersections. Three U.S. EPA models – CALINE4, CAL3QHC, & CAL3QHCR – are combined into one seamless graphical interface. These models predict air pollution concentrations of carbon monoxide (CO), nitrogen dioxide (NO2), particulate ...
Premium
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
AUSTAL View is a graphical user interface for the official German Federal Environmental Agency air dispersion model, AUSTAL. The AUSTAL model was developed according to Germany's air pollution control regulation TA Luft (Technical Instructions on Air ...
Premium
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
EcoRisk View is an advanced ecological risk assessment program for conducting a comprehensive multi-pathway ecological risk assessment by simultaneously calculating risk values for multiple chemicals, from multiple sources, at multiple exposure ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
NIRCal is a powerful chemometric software package to develop robust NIR methods which lead to fast and reliable NIR prediction ...
Premium
by:Lakes Environmental Software based inWaterloo, ONTARIO (CANADA)
Percent View is a utility that computes rolling averages and generates percentile concentrations for AERMOD, ISCST3, & ISC-PRIME Models. PLOTFILEs of percentile concentrations generated by Percent View can be visualized using Lakes Environmental Software package, AERMOD ...
Premium
Manufactured by:NIVUS GmbH based inEppingen, GERMANY
Software tool for configuration of external NivuLog SIM-modules, for unit analytics and for calibration of NivuLog ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Silo Trend is ENVEA’s cloud-based remote monitoring solution for the SHIELD Lite silo protection system. It can be easily retrofitted to existing systems. A gateway is simply installed to which up to 16 silo protection systems can be connected. All logged data from the SHIELD Lite system which are linked to the gateway is sent to the cloud. The web-based user interface makes it possible ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Data acquisition and management module (logger & router) handling all parameters: gas analyzers, dust monitors, meteorological and temperature sensors. The e-SAM DAHS ensures remote, bi-directional access and control of analyzers and the EMS via a WEB based interface. Furthermore, these data can be automatically and wireless transmitted to a central server, equipped with the XR® software ...
Premium
Manufactured by:Casella based inKempston, UNITED KINGDOM
Web based application for downloading and reporting on Noise at Work for use with 620 Sound level ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
WEX is a powerful software specially designed for the management of industrial gaseous emissions, solid or liquid in compliance with applicable ...
by:GISCON Geoinformatik GmbH based inDortmund, GERMANY
Global Net FX® Viewer is an instrument to display geographical and spatial information. Apart from being a mere viewer of information, it also provides a range of analysis and editing tools. It is developed as an application that is configurable and expandable, and offers multilanguage and cultural support. Additionally, there will be a user management system to define rights and roles, and a ...
by:GISCON Geoinformatik GmbH based inDortmund, GERMANY
GEODAVE Edit enables the users to edit the geometries and attributes of versioned SDE data. This unit consists of the modules. The proper access to the SDE data is managed by the unit GEODAVE Secure. One big advantage when applying GEODAVE Edit is that the GIS functions are processed server-sidely. Desktop GIS are no prerequisite at the individual client computers. The web application is ...