- Home
- Applications
- air flotation
Refine by
Air Flotation Product Applications
66 applications found
Today’s oil & gas companies are seeking water management service companies to provide turnkey, economical treatment solutions as a result of decreasing access to fresh water supplies, ESG (environmental, social and governance) initiatives, stricter environmental regulations and increased water use/handling ...
ByWaterTectonics based in Everett, WASHINGTON (USA)
Pork is the most common meat in China, and most of the meat sold in most supermarkets is also pork! Pork is the most important channel for daily intake of protein, fat and various nutrients. Therefore, China is also one of the largest pig farming countries in the ...
ByZhucheng Hongli Shengde Environmental Science and Technology Co., Ltd based in Zhucheng, CHINA
WatMan provides cities and municipalities with tailor-made solutions for their water treatment problems. We have solved water treatment problems for cities and municiplaities for more than 20 years. Our first deliveries were to the former municipality of Tuulos and the city of Pieksämäki in 1995 and 1996. Since then, we have delivered solutions to several municipalities and cities, including Turku, Porvoo, Tammisaari, Karjalohja, Vihti, Laitila and Uurainen. ...
ByWatMan Engineering Ltd Oy based in Lahti, FINLAND
Glycol dehydration is a liquid desiccant system for the removal of water from natural gas and natural gas liquids (NGL). It is the most common and economic means of water removal from these streams.Glycols typically seen in industry include triethylene glycol (TEG), diethylene glycol (DEG), ethylene glycol (MEG), and tetraethylene glycol (TREG). TEG is the most commonly used glycol in ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
The process requirements for composites and carbon fiber call for multiple solutions at every stage of production, from manufacturing to recycling. Dürr offers air pollution control systems, as well as customized process drying and curing ...
ByDürr Systems, Inc. based in De Pere, WISCONSIN (USA)
Primary Wastewater Treatment: The Salsnes Filter system is the only system you need for primary municipal wastewater treatment, as it can completely replace conventional primary treatment such as sedimentation tanks or clarifiers. Using a rotating filtermesh, a Salsnes Filter system can remove >50% TSS and >20% BOD from raw wastewater. A Salsnes Filter system requires only 1/10th the land and 30-60% the investment cost of conventional systems. More than that, sludge thickening and dewatering is integrated ...
BySalsnes Filter based in Namsos, NORWAY
Food Processing: Water is a precious and crucial resource in the process of food and beverage production. From screening to tertiary treatment, biological nutrient removal to water reclamation, WesTech equipment is designed to maximize efficiencies and minimize downtime, all while meeting the ever-tightening EPA regulations. ...
ByWesTech Engineering, LLC based in Salt Lake City, UTAH (USA)
A combination of factors in recent years has led to increased attention to water management in the oil and gas industry. Some of these factors include: limited water resources in certain areas, development of water-intensive technologies to better exploit unconventional plays, excessive transportation/disposal costs for water, a changing regulatory environment and a public push for sustainability and conservation relating to water as a ...
ByPentair Filtration Solutions, LLC based in Conroe, TEXAS (USA)
The Situation: Plankton biomass in sea water can be variable by season, weather and other uncontrollable conditions. Industrial plants with sea water intake can be affected by high plankton concentrations. Reverse osmosis desalination systems can have high differential pressure, and when treated with chlorine, can have high disinfection byproducts in the membrane permeate. Chlorophyll A is the primary pigment in algae. Its measurement in sea water is an effective method of tracking total plankton concentration. In ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
By using ceramic membranes in a tannery, a significant improvement in wastewater quality can be achieved. Highly contaminated wastewater: The tanning process produces highly contaminated wastewater, especially very high COD loads. The so-called COD is the chemical oxygen demand, which is used as a parameter for the degree of contamination of wastewater with organic impurities. This COD content can be reduced with the help of the ceramic membranes in order to relieve the corresponding governmental wastewater ...
Byatech innovations gmbh based in Gladbeck, GERMANY
Whether faced with meeting regulatory compliance, achieving maximum water recovery, or tackling treatment system optimization, WaterTectonics delivers innovative industrial water treatment solutions to meet site-specific requirements for clients in a variety of applications including: industrial stormwater, industrial wastewater, process water reuse, and desalination to name a ...
ByWaterTectonics based in Everett, WASHINGTON (USA)
The economic advantage of continuous discharge could only be achieved at this location by meeting strict discharge limits for the level of hydrocarbons present in the discharged water. Local ordinances required continuous monitoring for continuous discharge of the company’s treated ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
The Situation: A wastewater treatment company operated an oil/water separation facility on a multi-acre industrial site in Northern California. Its purpose was to recycle oil products for profit while at the same time providing a wastewater treatment service for industries based in Northern California. The oily water mixes processed by the company were obtained from tanker bilges, contaminated rainwater runoff, truck spills, oil spills into waterways, crankcase drain oils, hydraulic oils and industrial lubricants, ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in Edmonton, ALBERTA (CANADA)
The wastewater treatment plants designed by Artas’s expertise secure the most efficient and optimum treatment of wastewater via applying physical, chemical and biological ...
ByArtas Group based in Besiktas, TURKEY
The residue of traditional Chinese medicine extracted by pharmaceutical factories in production is commonly called Chinese medicine residue. As the national and social requirements for environmental protection are higher and higher, Chinese medicinal residue is no longer discarded as the original treatment method. Usually, it can only be treated by incineration of boiler. As there is a lot of liquid in the residue, the combustion cost is relatively high. The screw press is used to squeeze and dehydrate the Chinese ...
ByShanghai Techase Environment Protection Co., Ltd based in , CHINA
The dairy industry is dedicated to the production of milk and processing of by-products such as yoghurts, cheeses, butter, cream … This sector generates a large quantity of process water highly contaminated with organic matter, nitrogen and phosphorus, detergents, acidity, oils and greases. The range of water treatment solutions Salher offers endless options to address any quality and innovation ...
BySalher based in Madrid, SPAIN
A tomato cannery needed additional treatment to remove suspended solids from their process wastewater. At Heron Innovators, we specialize in the design, development, fabrication, and installation of highly efficient SAF™ systems. A pilot trailer was placed at the plant and ran for two months during the 2012 processing season, proving the system’s capabilities and setting the stage for the customer’s order for a complete system to be ...
ByHeron Innovators, Inc. based in Rocklin, CALIFORNIA (USA)
WATER TREATMENT IS A COMPLEX SEQUENCE OF PROCESSES AND REACTIONS. Each stage of the wastewater process is dependent on the previous. This interdependency is critical to our approach to designing mixers for you. The quality and control of the overall wastewater process depends on it. We have decades of experience designing mixers for wastewater treatment. As a result, our mixers are designed for the intricate needs of your wastewater treatment processes. ...
ByDynamix Agitators Inc. based in Richmond, BRITISH COLUMBIA (CANADA)
Sludge is a common type of residue produced as a by-product of wastewater treatment processes. The purpose of sludge dewatering is to concentrate the wastes into solids for easy and effective disposal. Aquasan’s chemicals help you achieve high dryness by optimizing for the equipment used, the dryness discharge objectives and the water’s discharge ...
ByAquasan based in Saint-Lazare, QUEBEC (CANADA)