- Home
- Applications
- chromatography separation
Refine by
Chromatography Separation Product Applications
13 applications found
Premium
TRILITE ion exchange resins and synthetic adsorbents can be used in various separation and purification processes for pharmaceuticals and food raw materials. Some representative examples are as ...
BySamyang Corporation based in Jongno-gu, SOUTH KOREA
Premium
By using ion exchange resins for chromatographic separation, various valuable substances can be separated, such as Fructose/Glucose separation, sugar recovery from molasses, and oligosaccharide separation, enabling high-purity sugar separation and acid purification in various applications. Chromatographic separation resins should have a very high level of uniformity coefficient (less than 1.1) and relatively small particle size to enhance separation efficiency by increasing the surface area per unit volume. ...
BySamyang Corporation based in Jongno-gu, SOUTH KOREA
Premium
TRILITE® ion exchange resins and synthetic adsorbents can be used in various separation and purification processes for pharmaceuticals and food raw materials. Some representative examples are as ...
BySamyang Corporation based in Jongno-gu, SOUTH KOREA
HAL LAN ™-01 Chromatographic Separation Resin Ca-type separation resin, mainly used as separation medium for chromatographic separation of glucose and fructose, or sorbitol and mannitol, ...
ByHenan Hailan New Material Co., Ltd. based in Hebi City, CHINA
Introduction: PFIB (Perfluorisobutlyene) is a gaseous compound from the group of Fluorinated Hydrocarbons. It is very toxic at ppb- concentrations already, inodorous, colorless, flavorless, heavier than air and very stable. The effects of intoxication can occur hours or even days after exposition. Thus, it is very dangerous. In specific processes in the chemical industry this compound is produced as un- wanted by product, such as the production of PTFE (Teflon), which cannot be avoided. Since there’s no ...
ByIUT Technologies GmbH based in Berlin, GERMANY
A custom report program for characterizing PCB mixtures. Features: PCB Reporter integrates a Raw file, applies several Calibration files to the chromatogram, and produces a special report which combines the results. A single analysis may look for up to thirty different Aroclors. PCB Reporter identifies peaks which contribute to more than one Aroclor, and displays them on a plot, flooded with color. Optionally, reported amounts may be corrected for this source of error. The calculations and the layout of the report ...
ByChromperfect LLC. based in Denville, NEW JERSEY (USA)
As plant protection products, pesticides may be used in food production (growth), storage, and transport. Traditional GC-TQMS analysis of multi-residue pesticides suffers from a lack of sensitivity when many compounds are analysed in a single run. In ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
Introduction: DMS (Dimethylsulfate) is a liquid compound with a high vapor pressure. It is a widely used basic chemical in the production of Agrochemicals, Cosmetics and Pharmaceutics. It is very toxic at ppb- concentrations already, but also carcinogenic and mutagenic. Furthermore by hydrolysis sulfuric acid is formed, so it is very corrosive also. Since there’s no warning effect in terms of irritation and/ or odor, dangerous amounts can be incorporated without realizing. The effects of intoxication, which ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Airborne Molecular Contamination (AMC) is a general term for existing molecular contaminations in clean room environments. These compounds belong to very different groups with very different mechanisms of damage. AMC is a concern for any high technology manufacturing process, especially in the microelectronic industry and is getting more and more in the focus of interest. AM-contaminations may cause adverse effects on production tools and consequently increase costs for high-tech companies. These airborne ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: Phosgene is the common name for Carbonic Dichloride, a gaseous compound. It is very toxic at ppb- concentrations already. Phosgene is a very important precursor in the chemical industry for the production of e.g. polyurethanes, pharmaceutics colors, etc. and therefore widely used. Even though it is handled in hermetic closed systems only, several generators for Phosgene are in operation worldwide to at least avoid all risks caused by transportation also. The effects of intoxication can occur hours or ...
ByIUT Technologies GmbH based in Berlin, GERMANY
To brewers and the brewing industry, hops is an important beer component because of the flavour and aromas imparted during the hops addition process. Consequently, anticipating and/or validating the flavour profile of a particular variety of hops, based ...
BySCION Instruments BV - Techcomp Group based in GP Goes, NETHERLANDS
Introduction: TCP (1,2,3- Trichloropropane) and DCP (2,3- Dichloropene) are liquid compounds from the group of Chlorinated Hydrocarbons, defined as carcinogenic and mutagenic at low concentrations already. Due to the pretty high vapor pressure of these liquids, a significant health- risk is created by handling. TCP and DCP are widely used as chemical precursors in production processes for the synthesis of various products, such as chlorinated solvents and Agrochemicals. Furthermore DCP is also used as a ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Introduction: Hydrazine is an inorganic compound consisting of just Hydrogen and Nitrogen. It is a clear and oily liquid with a high vapor pressure. Hydrazine is very reactive and very toxic, even at low ppb- levels already. It is carcinogenic, irritant at mucous membranes and damages lungs, the nervous system, kidneys and the liver. Hydrazine is used for various technical and chemical purposes such as a corrosion inhibitor in tubes and containers, in chemical production processes as reducing agent or Hydrogen ...
ByIUT Technologies GmbH based in Berlin, GERMANY