- Home
- Applications
- cooling tower
Refine by
Industries served
- Water and Wastewater
- Air and Climate
- Energy
- Manufacturing, Other
- Food and Beverage
- Medical / Health Care
- Commercial
- Environmental
- Construction & Construction Materials
- Aerospace & Air Transport
- Plastics & Resins
- Agriculture
- Mining
- Electronics and Computers
- Metal
- Pulp & Paper
- Monitoring and Testing
- University / Academia / Research
Cooling Tower Product Applications
163 applications found
Premium
Brentwood engineers reliable cooling tower components, including film fill media and drift eliminators, designed to provide long-lasting performance in industrial and commercial applications. Expertly engineered cooling tower components and solutions built on a foundation of comprehensive polymer knowledge, diverse worldwide manufacturing, and superior customer ...
ByBrentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA)
Premium
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. ...
ByMyron L Company based in Carlsbad, CALIFORNIA (USA)
Premium
The overall efficiency of thermal power generation inherently depends on the & cold-end of the cycle, where the waste heat is dissipated by the heat sink: The cooling system of the power plant. This actually is the part of a power plant where Brentwood supports its customers and partners with its rich product portfolio ranges from all dry air-cooled condensers (ACC) and Heller Technologies to all wet cooling towers and cooling ...
ByBrentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA)
Premium
Cooling tower. RO System. Biofilm, Air Scrubbers, Air Washers. Gas Scrubbers for ...
ByJenfitch INC. based in Walnut Creek, CALIFORNIA (USA)
The treatment of cooling towers with ozone is not only good for the environment but also good for the bottom line. Ozone, a powerful biocide and oxidant , affords several advantages over the traditional chemical treatment of cooling towers, ...
ByChemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA
Cooling towers are used widely in the industry for cooling down a process, there exist many version or types of cooling towers, and each designed with its advantages for the process. The generic term "cooling tower" is used to describe both direct (open circuit) and indirect (closed circuit) heat rejection equipment. While most think of a "cooling tower" as an ...
ByDanish Clean Water A/S based in Sønderborg, DENMARK
Hydrotech has extensive experience in retrofit and greenfield cooling tower side stream filter projects. Our solution offers great advantages compared to traditional equipment and performs total suspended solids reduction as needed to enhance cooling tower ...
ByHydrotech - Veolia Water Technologies AB based in Vellinge, SWEDEN
The fresh water requirement for a cooling tower in a typical coal-based power plant is approximately 80% of the total consumption of water. These concentrated cooling water blowdown streams are extremely rich in silica, are characterized by higher hardness levels and include other organic loads. Aquatech has vast experience in recycle/reuse solutions for cooling tower blowdown and cooling tower ...
ByAquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA)
HypoX® as an advanced electrolysis technology decreases biocide requirement in cooling towers with its own high disinfection ability which easily eliminates biofilm. So, increases the cooling efficiency. HypoX® brings solid disinfection results with much economical operation than buying biocides and chemicals for cooling towers. ...
ByKemisan based in Güzelbahçe/İzmir, TURKEY
Polluting floor substances in cooling towers seriously reduce the efficiency of the tower. The most effective way to remove these unwanted contaminant coats is the use of automatic backwash filter. Filtran provides solutions for full flow or partial flow filtration for industrial and HVAC cooling ...
ByFiltran Filtration Technologies based in Atasehir, TURKEY
Cooling Tower ...
ByFiltra-Systems Company, LLC based in Southfield, MICHIGAN (USA)
This means that more power is consumed to achieve the same amount of cooling. Eliminate the biofilm, and cooling towers return to their peak performance. ...
ByDripping Wet Water, Inc. based in San Antonio, TEXAS (USA)
ORAIPL manufactures a wide range of Ozone Generators and Ozonation Systems, for Ozone Treatment of Cooling Tower Water. Since the past 25 years, we have been the trusted global leader in using Ozone technology to treat Cooling Tower water. Use of Ozone in Cooling Tower Water treatment helps to control scaling, corrosion and bio fouling (SCB) of Cooling Tower parts, therefore ...
ByOzone Research and Applications India Private Limited (Oraipl) based in Nagpur (M.S), INDIA
Don’t let your cooling towers waste your money. Cooling towers use vast amounts of water during normal operation. ...
ByWint based in Rosh Ha’ain, ISRAEL
Detect cracks and fatigue along beams, containments, cooling ...
ByfibrisTerre Systems GmbH based in Berlin, GERMANY
Prevent biofouling growth: Algae can grow in the cooling tower itself and on the grids from the tower. This could lead to enormous disadvantages of biofilm in cooling towers. Therefore, water used in cooling towers needs frequent treatment and chemical shocks to keep levels of micro-organisms to a minimum. ...
ByLG Sonic B.V. based in Zoetermeer, NETHERLANDS
” When temperatures are high, for example in cooling towers, a matrix of different microorganisms such as bacteria, fungi, EPS and algae can grow very rapidly. The disadvantages of biofilm formation in cooling towers can be enormous. Therefore water used in cooling towers needs frequent treatment and chemical shocks to keep levels of micro-organisms to a ...
ByLG Sonic B.V. based in Zoetermeer, NETHERLANDS
Seawater Desalinator for Cooling Tower Blowdown ...
ByNONA Technologies, Inc. based in Somerville, MASSACHUSETTS (USA)
Water from cooling towers attracts and absorbs airborne contaminants on a continuous basis. Typically, 85% of suspended solids in cooling water and hot water loops are smaller than 5 microns. Scientific studies have shown that these small particles (5 microns and less) are the adherent contaminants fouling cooling tower water, chilled water and heat exchangers, thereby reducing your cooling system ...
ByVortisand - a brand by Evoqua Water Technologies LLC based in St-Laurent, QUEBEC (CANADA)
Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid ...
ByEvapco Inc. based in Westminster, MARYLAND (USA)