- Home
- Applications
- effluent testing
Refine by
Effluent Testing Product Applications
7 applications found
The way is now open for more widespread use of direct toxicity tests as a basis for toxicity-based consents. Samples of the industrial effluent are collected at source, for testing on the actual bacteria of the receiving activated sludge. The tests used are the Respiration Inhibition Test and the Nitrification Inhibition Test. Note that this approach mirrors that of the regulators of discharges to receiving ...
ByStrathkelvin Instruments Limited based in North Lanarkshire, UNITED KINGDOM
In some cases, as a means to supplement BOD, it is also desirable to monitor chemical oxygen demand (COD) of industrial effluents. Both of these tests, are time and labour intensive reducing the frequency at which they can be measured for a given ...
ByUviTec, part of ABB (Formerly Real Tech Inc.) based in Whitby, ONTARIO (CANADA)
Applications within Waste Water Treatment Works can include monitoring of effluent levels at the final outflow point (into rivers and coastal areas) as well as the primary, secondary & tertiary stages, the data potentially feeding into energy saving systems to optimise process performances. The CTG UviLux BOD Indicator in-situ fluorometer can also be used within pipe and channel networks to test for incidences of black water and grey water ...
ByChelsea Technologies Ltd based in Yately, UNITED KINGDOM
The German Waste Water Ordinance implies that the resulting effluent has to be tested on the content of chemical oxygen demand (COD). In comparison with conventional testing methods the use of online COD analyzers offers high savings and also enables efficient water ...
ByLAR Process Analysers - a brand by Process Insights, Inc. based in Berlin, GERMANY
InnovaPrep technologies are used by drinking water and wastewater labs, commercial services labs, and public health labs for faster, easier, and better concentration of waterborne pathogens from drinking water, source waters, and wastewater influent and ...
ByInnovaPrep LLC based in Drexel, MONTANA (USA)
Paperboard is a thick paper based material. While there is no rigid differentiation between paper and paperboard, paperboard is generally thicker (usually over 0.25 mm, 0.0098 in or 10 points) than paper. According to ISO standards, paperboard is a paper with a basis weight (grammage) above 224 g/m2, but there are exceptions. Paperboard can be single or multi-ply. Paperboard can be easily cut and formed, is lightweight, and because it is strong, is used in packaging. Another end-use would be graphic printing, such ...
ByCequesta Water based in Gan -Yavne, ISRAEL
A lot of research is carried out in laboratory and on real fires as to the gaseous substances produced in fire effluent. Measurement principles using analytical instrumentation are becoming more widely used in fire testing, due to the quick, real-time nature of the measurements. ISO 19702 is an international standard developed for the use of FTIR analysers in the analysis of gas from fire effluents. Further to this, local test standards such as ...
ByProtea Limited based in Middlewich, UNITED KINGDOM